Results for
KEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Neoprene timing belts with silicone coating
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
PU timing belts with silicone coating
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
PU timing belts with easy joint as strong as a welded joint The easy joint timing belt fastener is the perfect solution, for a quick and easy mechanical endless connection of PU timing belts. Assemble without disassembling, without stopping your production line Replace your belts in few minutes without disassemble your hoods, pulleys, axis. Reduce your production downtimes. The method of mechanical assembly and fastening system easy joint offers unique solutions for easy and fast repairs of power transmission belts or conveyor belts. Pitches: H / T10 / AT10 / T20 / AT20 / 8M / 14M Standard: Polyurethane 90° Shore A grey Versions: Standard, PAZ, PAR Cords: reinforced with a Polymercord around the Pin in each tooth joint, arranged in parallel Width: from 10 to 150mm, (wide belts possible on request)
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Keiper haul-off timing belts are made with polyurethane or neoprene timing belts that are finished with many different kinds of coatings. They are used for conveying foils in bag forming, filling and sealing machines as well as numerous other conveying tasks. The extensive range of designs offers the optimal solution for any transport task and application, e.g. with smooth or vacuum-processed surface, finished according to individual specifications, and with many different coatings. Timing belts - Polyurethane molded timing belts - or neoprene molded timing belts Tension cords - Steel - Aramid - Polyester Coatings - PU yellow - Linatex - Various elastomers - Silicone
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
easy drive® track timing belts can be made from the complete range of polyurethane and neoprene timing belts: in open lengths, endless welded, for form belts, endless Flex or wide timing belts, in almost any length and width. The directional guiding, with groove in tooth, is either already integrated in the timing belt during production or added later. These timing belts exhibit the same properties as standard timing belts. However, in addition, axial movement is prevented and the zero-play guiding leads to high directional stability. Advantages • Universal application instead of flanged pulleys or special toothed belt guides • Can be used with any tooth shape or belt pitch • Can be combined with any material – steel, aluminium, grey cast-iron or plastics • For polyurethane and also for neoprene timing belts • Maximum directional stability, without lateral play, inaccurate running or drift
Request for a quoteCOSMOCHROME LTD
Greece
Water based acrylic varnish that protects and decorate any interior and exterior wooden surface such a doors, windows, frames e.t.c. It provides a flexible and water repellent finish that gives long term protection and beauty. Its applied easily, smoothly and evenly, has exceptional resistance properties against U.V. radiation, humidity and frost and provides a superb finish that enriches the wood grain. It is odorless, user and environment friendly and contains U.V. filters that protect the wood from U.V. radiation.
Request for a quoteNINGBO TOWER INDUSTRY CO.,LTD
China
Engine Timing Tool Kit MINI Timing Tool N12 for BMW
Request for a quotePARSMEGA MAKINA
Turkey
Men's Classic Shoes with Patent Leather Leather Lining, Leather Insoles, Lace-Ups and Ultra Light Eva Soles.
Request for a quoteQUELLTECH GMBH
Germany
QuellTech Solution For this purpose, QuellTech offers a perfectly tailored seam tracking solution, which is based on a QuellTech 2D-Laserline Sensor of the Q4 family. The method consists in measurement of the real position and width immediately ahead of the welding process. The laser sensor captures the real dimension of the weld bead, and the software used for this process simultaneously sends the nominal position to the robot. The robot performs a correction movement in X or Z position according to this measurement. This way not only the deviation caused by tolerances, but also the warping effect can be compensated – and the weldment takes place exactly at the required position. The QuellTech 2D-Laserline Sensor is specially prepared to the highly disturbing ambient light from the weld process. It can be cooled and protected from weld spatter, so this model proves to be particularly adequate for operation in the harsh environment of the welding process.
Request for a quoteINNOVATIVE SENSOR TECHNOLOGY IST AG
Switzerland
The IST AG LV5 sensor is a flow-through biosensor and offers the possibility for multi-parametric measurements, since up to 4 analytes can be measured simultaneously (glucose, lactate, glutamine, glutamate). The sensor features a very small flow cell (1 µL) and therefore requires minimal sample volumes when used as an analyzer. Further advantages of the LV5 biosensor include: — Excellent long-term stability over a month in continuous measurement mode (lifetime varies depending on various factors, including the analyte concentration and buffer system (medium) amongst others) — Long shelf life (under appropriate environmental conditions) — Gamma and beta sterilization compatible — Suitable for continuous and analyzer measurement modes — Fast response time (depends on the buffer system (medium)) — Reference, counter and blank electrodes on-chip — Integrated flow cell (various volumes) Suitable for sampling systems in laboratories or food and pharmaceutical industries.
Request for a quoteINNOVATIVE SENSOR TECHNOLOGY IST AG
Switzerland
The IST AG IV4 biosensor is a flexible stripe with large form factor ideal for direct dipping in the measurement media. It is designed for the detection of a single analyte, glucose as standard. This sensor is ideal for applications that require in-line continuous measurement with high reliability. Further advantages of the IV4 biosensor include: — Excellent long-term stability — Long shelf life — Gamma and beta sterilization compatible — Fast response time and outstanding reliability — Reference, counter and blank electrodes on-chip Given its compatibility with gamma radiation, the IV4 sensor can be used for example in bioreactors or aseptic media.
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteSEMIN
France
COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. The paste obtained is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 8 hours - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Reaction to fire: A1 STORAGE 9 months in original unopened packaging protected from humidity. MIXING RATIO 10 to 11 liters of water per 25 kg bag. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.
Request for a quoteSEMIN
France
COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 4 hours - Adhesion of the tape: > 1000 g - Density: 0.9 - Reaction to fire: A1 STORAGE 9 months in original unopened packaging protected from humidity. RATE OF MIXING 10 to 11 liters of water per 25 kg bag. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.
Request for a quoteIGUS® GMBH
Germany
Removable ball pins Replaceable Customer specific dimensions and configurations can be removed and exchanged from both sides. maintenance-free Ball pins made from steel, stainless steel, plastic Easy assembly and disassembly of the ball pins by defined forces Configuration online Light weight Application areas:Automobile industry, automation, agricultural engineering, plant engineering, vehicle engineering igubal® double spherical bearing WDGM igubal® variable double spherical bearing igubal® double spherical bearing WDGM igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints not removable igubal® coupling bars configurator - not removable One side removable igubal® coupling bars configurator - removable from one side Both sides removable igubal® coupling bars configurator - Removable from both sides Removable ball pins Replaceable Customer specific dimensions and configurations can be removed and exchanged from both sides. maintenance-free Ball pins made from steel, stainless steel, plastic Easy assembly and disassembly of the ball pins by defined forces Configuration online Light weight Application areas:Automobile industry, automation, agricultural engineering, plant engineering, vehicle engineering igubal® double spherical bearing WDGM igubal® variable double spherical bearing igubal® double spherical bearing WDGM igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HOPPECKE BATTERIEN GMBH & CO. KG
Germany
The grid | power V H series is particularly suitable for UPS applications with discharge times in the short-time range (1 minute to 3 hours) without falling below the permitted final discharge voltage. grid | power V H is the optimum solution for high-current applications and partial-cycle use. It is typically used in power plants and energy supply systems, UPS and switchgear. Extremely extended water refill intervals up to maintenance-free, high-energy density and long service life characterize the grid | power V H batteries. In summary, the grid | power V H can save time and resources and reduce investment costs.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteJOSEF MACK GMBH & CO.KG
Germany
Current transmission has to be assured, even when the application is greasy or oily. This is where our metal gauze brushes come in. What challenges have you got for us? MACK metal gauze brushes are capable of breaking through the oil coat which develops between the stator and the rotor during wet running, thereby ensuring permanent surface contact and power transmission. The versions available range from the simple metal gauze brush without fitting to the complex telescopic metal gauze brush for telescopic current supply.
Request for a quoteSHENZHEN TENKING TECHNOLOGY CO., LTD.
China
Very elagant design with LCD display. Well suited to being in bed, office and home
Request for a quoteSRL
Italy
DUAL is the innovative COMBINED system between security grate and shutter, which share the SAME FRAME and a SINGLE LOCKING SYSTEM, suitable for elegantly protecting every home. DUAL ALL is composed of: FRAME in galvanized steel on 3 sides made by thick bending. 20/10, with 60mm front fin – Minimum depth 97mm and 20mm H lower crossbar. GRATED DOOR made with sturdy thick galvanized steel profiles. 20/10: lock holder upright has dimensions of 60x30mm, while the crosspieces and uprights on the hinge side are 40x30mm; and as a filler chosen from our aesthetic models. Steel LOCK without central hook, is equipped with deviators that control 4 solid steel locking pins diam. 18mm, 2 upper and 2 lower (one of which is CUT-PROOF ROTATING) which intercept the closing plates installed on the shutter leaf. ½ DRILL-RESISTANT SAFETY CYLINDER equipped as standard with 1 construction site key for installation, 3 master keys and a card for their duplication.
Request for a quoteSPANDAUER VELOURS GMBH & CO. KG
Germany
Our modern machine pool allows us to produce a wide variety of three-dimensional, technical plush fabrics in different heights, yarns and fibre blends. You benefit from our many years of experience in a wide variety of applications, from painter rollers and cleaning plush fabric to plush fabric for textile washing facilities or individual solutions. We use a wide variety of natural and synthetic fibres, which allows us to find a suitable solution for every application. We also offer lint-free products, of course. In addition to our tried and tested basic qualities, we also develop individual solutions for abrasive and non-abrasive cleaning plush. We can produce plush fabrics tailor-made to your needs using a variety of yarns, fibre blends and coatings. This also includes cleaning plush fabrics for use in fully automatic cleaning systems. We make particularly hard-wearing plush fabrics for textile wash facilities, which have been specially developed for use in wet or dry
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
KEIPER timing belt clamping plates can be made of many different materials, e.g. aluminum, steel or stainless steel. Keiper can produce them in all pitches and designed according to your specifications and drawings. This means that you will receive the optimal solution for the intended application and load. Our timing belt clamping plates work together optimally with our extensive and complete range of timing belts: in other words, a perfectly matched system for your requirements. We also have a large number of standard aluminum clamping plates on stock, which can be reworked according to your specifications (e.g. bores and mechanical processing based on drawings). Furthermore, such special surface coatings as hard coating, anodizing, zinc coating or bronzing improve the corrosion and wear resistance.
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Neoprene endless molded timing belts (form belts) STD S8M / S14M / DS8M
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Neoprene endless molded timing belts (form belts) STD S3M / S5M / S8M
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
Neoprene endless molded timing belts (form belts) HTD D5M / D8M / D14M
Request for a quoteResults for
Time it - Import exportNumber of results
233 ProductsCountries
Company type
Category