Three-phase motors - Import export

"The high voltage motors can be made of cast iron or welded steel (lighter solution). HIGH VOLTAGE MOTORS WITH CAGE: - Three-phase motors with cast iron cage - High voltage motors between 3 and 13.8kV - Power from 160kW to 10MW - IP55 or IP23 protection - Efficiency IE3/IE4 (tomorrow IE5) - Standard or custom sizes are available for sale - 2-4-6 poles stocked motors up to 1,2MW, IC411 cooling - Customized motors according to your specifications or to replace an existing motor will be delivered to you - Cooling mode IC411-IC416-IC511-IC611-IC616-ICW81 - Ball or sleeve bearings"

Our synchronous and asynchronous machines are distinguished by their high energy efficiency. The motors are reliable, safe to operate and robust. With our three-phase motors we offer special machines for almost any application. They are designed and built for the specific requirements of the respective drive application. We offer individually adapted motors – both in terms of electrical layout and mechanical design. We provide made-to-measure units, for example, for existing foundations or special bearings to absorb additional forces. The power network conditions on site are taken into account for the electrical layout to ensure that only minor voltage drops occur and a reliable run-up is guaranteed. Our portfolio comprises asynchronous motors with cage or slip-ring rotors as well as synchronous motors with brushless or static excitation.

Submersible motors from oddesse are used as pump drive for applications with special requirements, such as in mining, utilisation of geothermal energy as well as in offshore and marine technology. EXECUTIONS - Three-phase asynchronous motors for 50 or 60 Hz and voltages up to 1,000 V - Water-filled motors with rewindable stators, dynamically balanced and with high resistance to thermal stress High-quality thrust bearings that operate in both rotation directions and possess a high load-bearing capacity - Water-lubricated radial bearings for a horizontal and vertical motor application - Windings for temperatures up to 80° C of the pumped medium available - Speed regulation between 30 and 60 Hz via frequency converter possible - High-quality materials for application in service, industrial and seawater PERFORMANCE RANGE (AT 50 HZ) Up to 45 kW/60 HP with 6" motors Up to 132 kW/175 HP with 8" motors Up to 220 kW/300 HP with 10" motors Up to 400 kW/550 HP with 12" motors

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23)

"We offer multi-position cast iron motors to provide more flexible mounting solutions to customers. MULTI-POSITION CAST IRON MOTORS (OUR CODE: MF*HU) - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Heating class B - Multi-position with repositionable feet from size 160 to size 280 - Currently stocked in 2-4-6 poles - IE3/IE4 efficiency - All other options of the classic cage motors remain applicable"

"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."

"The world is changing and companies are under increasing pressure from environmental policies. An international standard was established in 2008 and updated in 2014 to classify the international energy efficiency (IE) of low-voltage three-phase induction motors. This is the IEC/EN 60034-30.1 standard. It reinforces the balance of international efficiency regulations. At Focquet, we have more and more IE4 motors to meet the needs of our environmentally conscious customers. We continue to invest heavily in this type of motor. STANDARD CAST IRON IE4 MOTORS: - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Heating class B - Stored in 230/400V - 400/690V or 500V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE4 - Form B3-B5-V1-B14-B35-V15-B34 - Standard motors equipped with PTC sensors from size 132 onwards - ...

"The world is changing and companies are under increasing pressure from environmental policies. An international standard was established in 2008 and updated in 2014 to classify the international energy efficiency (IE) of low-voltage three-phase induction motors. This is the IEC/EN 60034-30.1 standard. It reinforces the balance of international efficiency regulations. At Focquet, we have more and more IE4 motors to meet the needs of our environmentally conscious customers. We continue to invest heavily in this type of motor. OPEN VENTILATED MOTORS (OUR CODE: MOV) - Three-phase motors with cast iron cage - IP23 protection - Class F insulation - Heating class B - Legs molded in the casing - Stored in 230/400V - 400/690V - Operating in 50/60hz - Cooling IC01 - Other special voltages or insulation class H on request - Stored speed : 3000 rpm or 1500 rpm or 1000 rpm - Efficiency IE4 - Form B3-B5-V1-B35-V15 - Standard motors equipped with PTC sensors for all motors

"Aluminum motors offer a lighter solution to our customers, compared to a cast iron frame. STANDARD ALUMINUM MOTORS (OUR CODE: MA) - Three-phase motors with aluminum cage - IP55 protection - Class F insulation - Class B heating - Removable feet, which allows the terminal box to be turned to the desired side - Stored in 230/400V - 400/690V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B14-B35-V15-B34 - Motors from size 56 to 160 - These motors can be equipped with options such as special sensors like PTO or PT100 - IP56 option - Standard motors equipped with PTC sensors - These motors can be equipped with options such as special sensors, purge holes, heating resistors, umbrella covers, specific epoxy paint - C3M- C5M - Three-phase forced ventilation (code VF) or single-phase (code VFW).

"Cast iron motors are an ideal solution for our customers who want motors that can withstand harsh/aggressive environments. STANDARD CAST IRON MOTORS (OUR CODE: MF): - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Class B heating - Legs molded in the casing - Stored in 230/400V - 400/690V or 500V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (tomorrow IE5) - In 8 poles, we have IE1 and IE3 since there are no standards yet in force above 375kW - and up to 1,400kW - Form B3-B5-V1-B14-B35-V15-B34 - Standard motors with PTC sensors from size 132 upwards - Standard motors in size 315-355 equipped with NU bearing in 4-6-8 poles speed - Standard motors in size 355X-400-450-500-560 equipped with NU bearing in speed 4-6-8 poles as well as PTC+PT100 winding - PT100 bearings and heating resistor 1 x 230V ...

"IP23 ventilated open motors (ODP) are an ideal solution for our customers who want compact and smaller motors than IP55 motors. In general, these motors have one less frame size. They are mainly used in clean environments (e.g. manufacturing of plastic bottles for soft drinks, cold compressors for food freezing, ...) STANDARD OPEN VENTILATED MOTORS (OUR CODE: MOV) - Three-phase motors with cast iron housing - IP23 protection - Insulation class F - Heating class B - Legs molded in the casing - Stored in 230/400V - 400/690V - Operating in 50/60hz - Cooling IC01 - Other special voltages or insulation class H on request - Stored speed : 3000 rpm or 1500 rpm or 1000 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B35-V15 - Standard motors equipped with PTC sensors for all motors - Motors are equipped with an isolated bearing for use with a variable speed drive. The PI will eliminate circulating currents in the rotor. - Provided with two ball bearings

Eccentric screw pump tube B70V-D Industryfor three-phase motors The B70V-D 120.1 Eccentric screw pump in the industrial version is a powerful positive displacement pump for highly viscous, pasty and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus conserve important resources. * available in special immersion depths of 500 - 2500 mm on request * Connection to the discharge nozzle of the pumping station is made with a Tri-Clamp * Media examples: highly viscous mineral oils, resins, emulsions, paints and many other thick materials. Features & Advantages * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packages. The pump meets the requirements of hygienic design and is certified according to the "3-A Sanitary Standards". * also available in special immersion depths * equipped as standard with a carrying handle and a Motor * Media examples: liquid foodstuffs and semi-luxury foods, pharmaceutical agents and cosmetic products Features & Benefits * Threadless, manually releasable quick connections in the wetted area * Quick and easy disassembly * Simple and fast cleaning * Gentle, low-pulsation product conveying * Certified and approved according to the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10".

Eccentric screw pump tube B70V-D Industryfor three-phase motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with Mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V-D 12.1 Eccentric screw pump in the industrial version is a powerful positive displacement pump for medium, highly viscous and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials. * Uniform volume flow * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2

The Eccentric screw pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, you can choose from a range of different rotary current motors, which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * also available in special immersion depths * Media examples: viscous cosmetic products, food and etc. Features & Advantages * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

0.55 kW Compact externally ventilated single-phase three-phase motor with capacitor, 5 m connection cable included and shock-proof plug. The motor is designed in a way that acid vapours or aggressive atmosphere cannot damage it. Light and convenient Quiet and durable Quick motor assembly/disassembly by Lutz hand wheel

ViscoTec Dispenser 3VMP22 as a volumetric dosing pump for larger volumes ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming mode of operation

ViscoTec Dispenser 3VMP18 as a volumetric dosing pump for larger volumes ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products - with a repeatability of +/- 1 %! Absolutely precise, uniform and reliable dosing of various media and handling of larger volumes. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming operation

The MEMDOS LB solenoid-driven diaphragm dosing pump is the ideal solution for applications where the pump needs to be integrated into control systems or control loops. Thanks to its robust plunger drive and the option of manual or automatic capacity adjustment, the MEMDOS LB reliably and precisely doses various media such as acids, alkalis, precipitants and flocculants. The dosing capacity is adjusted either by mechanically adjusting the stroke length or by controlling the speed of the three-phase motor via a separate frequency converter. This flexibility enables precise control of the flow rate to meet different requirements. On request, the MEMDOS LB is also available with a double diaphragm system, which offers additional safety and reliability. This combination of versatile control and robust design makes the MEMDOS LB the ideal choice for demanding dosing tasks.

Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V motor ensures high productivity. The two side bars with a length of 60 cm allow to pack more bags simultaneously (on one or both of the bars), reducing packing times. Is however possible to use it with a single bar. The DZ 600 2S packaging machine is also used for the vacuum seal and the jars of creams, jams, etc .. The vacuum chamber utilizes specific smooth envelopes for vacuum. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar.

Eccentric screw pump tube B70V HD-D Industrywith circulation/flushing connection for three-phase motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2

High quality three-phase electric asynchronous motor with cage rotor, fully enclosed and cooled by fan fan, is available in different voltages and frequencies, also with customizations to meet each need. With flange and internal shaft for greater efficiency and savings in weight and size when coupling to the high pressure pump.

Two-wheel cart with handle Triplex pump with ceramic pistons and connecting rod system Automatic pressure bypass valve with pressure relief from the pump head Three-phase induction motor with Thermal protector Pressure adjustment Gauge pressure Integrated detergent suction Adjustable detergent injector Electric cable length 5 m

Two-wheel cart with handle Triplex pump with ceramic pistons and connecting rod system Automatic pressure bypass valve with pressure relief from the pump head Three-phase induction motor with Thermal protector Pressure adjustment Gauge pressure Integrated detergent suction Adjustable detergent injector Electric cable length 5 m

Heavy-duty 2-wheel cart with handle Triplex pump with ceramic pistons and Connecting rod system Automatic pressure by-pass valve with pressure relief from pump head Three-phase induction motor with Thermal protector Adjustment Pressure gauge Flanged pressure relief Integrated detergent suction Adjustable detergent injector Built-in detergent tank with 3L capacity Inspectable water filter Electric cable length 5 m General characteristics Standard accessories

The LRD series top-entry sealed agitator can be used for mixing in closed containers with a mechanical seal. It is designed with a coupling housing. The agitator shaft is borne in the bearing housing and the mechanical seal (single- or double-acting). The seal can be exchanged without dismantling the mixer from the tank (also in case of a side entry). Drives with shaft journals for LRD series: Three-phase motor Helical geared drive unit Parallel shaft geared drive unit Variable speed geared drive unit Helical bevel geared drive unit According to the tank size, the LRD series agitator is available in four different frame sizes. Shaft diameters of 30 mm to 90 mm and shaft lengths of up to 10,500 mm are feasible. Explosion protection to ATEX 2014/34/EU for explosive zones 0 to 2 for gases and for explosive zones 20-22 for dusts (device group II, categories 1-3). Pharmaceutical version with FDA and GMP feasible.

The direct driven agitator SPR is Geppert Ruhrtechnik’s solution for all industrial mixing tasks that demand a turbulent mixing with high peripheral speeds. It is driven by a three-phase-motor with poles between 2 and 8 as well as drive ratings between 0.25 kW and 75.0 kW. The SPR could also be equipped with a frequency inverter upon request (up to 7.5 kW). The agitator shaft is directly connected at the shaft journal of the drive via sleeve or flange coupling. Solutions with quick-change or precisions-change coupling are also feasible for lower drive ratings of up to 3.0 kW. The standard agitator element is a propeller. Other mixing elements according to the mixing task upon request. The SPR can be mounted as a stationary unit or – at a weight of up to 25 kg – it can also be mounted directly onto the open tank via a vessel clamp Up to motor size 112, all SPR series agitators can also be provided with reinforced shaft. Type test certificate numbers for zone 0 (category 1).

SPR - Standard-propeller-agitator The direct driven agitator SPR is Geppert Rührtechnik’s solution for all industrial mixing tasks that demand a turbulent mixing with high peripheral speeds. It is driven by a three-phase-motor with poles between 2 and 8 as well as drive ratings between 0.25 kW and 75.0 kW. The SPR could also be equipped with a frequency inverter upon request (up to 7.5 kW). The agitator shaft is directly connected at the shaft journal of the drive via sleeve or flange coupling. Solutions with quick-change or precisions-change coupling are also feasible for lower drive ratings of up to 3.0 kW. The standard agitator element is a propeller. Other mixing elements according to the mixing task upon request. The SPR can be mounted as a stationary unit or – at a weight of up to 25 kg – it can also be mounted directly onto the open tank via a vessel clamp Up to motor size 112, all SPR series agitators can also be provided with reinforced shaft. Type test certificate...