Threaded screws - Import export

Indexing pin hardened: Threaded sleeve and indexing pin free-cutting steel Stainless steel version: Indexing pin hardened: Threaded sleeve 1.4305 Indexing pin 1.4034. Mushroom knob black grey thermoplastic. Thread lock blue polyamide. Version: Steel version: indexing pin hardened, ground and black oxidised. Stainless steel version: indexing pin hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Form CP is recommended for applications where the plunger remains disengaged over a long period and the pin should be prevented from springing back. The thread lock enables the plunger to be screwed in to the exact depth required, no spacer ring is required. The thread lock is a gripping polyamide coating that is applied punctiform (spot).

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 0.9 mm Head: hemispherical with press washer, Philips slot No2, M = 4.5 5.1

Self-tapping screw for fixing gypsum fiber boards Head: countersunk with notches for cutting, Philips slot No2, M = 4.5-5.1

• Compatible with machine screw threads • Provides a high joint strength • Low loss of preload force under high dynamic and thermal loading • Effortless lead-in with low insertion torque for safe assembly • Excellent self-locking vibration resistance • High stripping torque • Allows for a reduction in installation depth

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

NSPV Plain to Screwed Thread Conduit Coupling Plain to screwed adaptors is designed with one side to fit rigid conduit and the other has an internal threaded end. Rigid conduit is inserted to the plain end and the threaded end requires a male adapter to be screwed into it.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Description: natural wooden dropper cap which combined by bulb teat and threaded wooden screw cap and glass tube assembled, the collar is made by natural real wood which is green and eco friendly sustainable packaging for beauty products. Use for: dispensing essential oils and serums for beauty formulas. Decoration available: wooden cap can be sprayed with custom color, and with laser engraved logo for brand. Sizes available: more sizes are available and custom wooden dropper cap is available to fit your bottle.

are designed to deliver cost-effective optimal joint performance for thin sheet metal applications. Tapered Thread Under Head Maintains full thread major diameter immediate to the surface Undercut Head Material extruded by the screw is absorbed while the under-head contact area is increased allowing for enhanced thread engagement and resistance to stripping Rounded Tip Provides easy entry into small holes with self-extrusion of the sheet metal as well as increase resistance to stripping Trilobular Build Provides resistance to loosening caused by vibration. Available with all Drive System Significantly extends tool life Ideal drive system for maximum torque transfer

are designed for optimal joint performance with lower in-place fastening costs. Trilobular thread shape Improves and expedites thread engagement and the initial thread forming Resists loosening caused by vibrations Provides a higher uniform drive Prevents internal thread stripping

is engineered for direct assembly of thin walled and flat designed thermoplastic components. Direct assembly using the Polymate30 Screw makes thin walled and flat designs possible. This leads to material savings and reduced cycle times during injection moulding. Therefore, the quality of the Polymate30 joint and the fastening component, translates into a considerable cost saving overall.

is a thread-cutting fastener designed to meet the demanding requirements of thermoset plastics with easy assembly coupled with a strong, reliable joint to ensure optimized assembly performance. Provides an asymmetrical 30º thread profile, inclined towards load surface to increase friction (FR) between the application and the fastener Reduction in radial stress Reduction in back-out caused by relaxation Increase in strip resistance Elimination for the need in supplementary locking devices Optimal thread pitch allows for deeper thread engagement Increase in pull-out strength Increase in resistance to vibration loosening Increase in load-carrying capability The recessed thread root allows space for displaced material Minimization in installation torque Miniziation in the risk related to clogging and galling of threads during assembly The shank slot minimizes chip production Through hardened to Rc 33-39

are self-tapping screws designed to securely mount thin sheet metal joints. Strong screw joint Circular cross section for better thread engagement Quick alignment and low installation torque for an easy and safe assembly High stripping torque Metric compatible

K-TITE high-performance thread rolling fasteners are specially designed to lower your in-place fastening costs. K-TITE fasteners form internal threads into plain holes in ductile materials upon initial installation, which: • Eliminates the need to pre-tap the nut member • Reduces problems associated with assembling screws and bolts into pre-tapped holes, such as cross-threading

is a special fastener designed for reliability and an easy direct assembly into thermoplastics. Enhancement when compared with Polymate30: The re-designed geometrical flank allows for optimized movement of plastic material while initiating the fastening procedure. Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. At the same nominal diameter, up to 50% gain in torsional and tensile strength. As there is a larger core and reduction in the thread pitch length, shorter fasterners and/or smaller diameters may be used. Improved pitch provides added vibrational safety. SOMETIMES SMALLER IS BETTER The visuals below show the advantages of a reduced fastener length and diameter by comparing Polymate30 to Polymate20. Substitute A provides a reduction in length, whereas Substitute B provides a reduction in diameter. For both scenarios, the reduction in pitch from the Polymate20 provides a maintainted thread flank.

FEATURES AND BENEFITS Enhancement when compared with Polymate30: • The re-designed geometrical flank allows for the optimized movement of plastic material while initiating the fastening procedure. • Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. • At the same nominal diameter, up to 50% gain in torsional and tensile strength. • As there are a larger core and reduction in the thread pitch length, shorter fasteners and/or smaller diameters may be used. • Improved pitch provides added vibrational safety.

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Coating of threads of aluminum alloys, high-alloyed, galvanized and austenitic steels to reach controlled friction values during assembly and facilitate thread forming Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral Forms a colourless, adhesive and tackfree sliding film after drying Includes an inhibitor, which prevents corrosion during the drying

Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.

flat head screw with metric thread and hex socket

Welding Neck (WN) Flange Slip-On (SO) Flanges Socket Weld (SW) Flanges Lap Joint (LJ) or Van Stone Flanges Threaded or Screwed Flanges Blind Flanges Custom Flanges and fittings

Enter the desired lever colour here. The standard colours are: Black grey clamping lever, traffic red push button. Orange clamping lever, black grey push button. Traffic red clamping lever, black grey push button. Where L ≥ 60 mm the thread length is 60 mm. On request: Other threads, screw lengths and special versions. Dimension “H1” available in other lengths at extra charge. Drawing reference: 1) flat point DIN 78

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

When screwing the nuts onto the thread, the thread lock is plastically and elastically deformed. The elastic deformation causes a radial frictional lock against the nuts being loosened. The plastic thread lock is only effective when the nuts are fully screwed onto the male thread. The screw length must be selected so that at least two full threads protrude from the nut. Due to the plastic deformation of the thread lock, these nuts should only be used once.

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering