Thermal spraying - Import export

Manual arc spray equipment 300A for Zn and Zn/Al wires - hose package of 5 meters

Manual arc spray equipment 400A for Zn, Zn/Al and Al wires - high speed job - hose package 10 meters

Manual arc spray equipment 300A for Zn, Zn/Al and Al wires - hose package 10 meters

Manual arc spray equipment 300A for Zn and Zn/Al wires - hose package up 16 meters

Thermal spraying processes (as classified in the EN 657 and ISO 14917 standards) offer a wide range of applications within modern surface technologies. Components made from a wide range of base materials can be coated with layers of high-melting-point metals or ceramics to protect them against wear and corrosion. Furthermore, thermally conductive or heat-insulating layers can be applied to highly thermally stressed components. Almost all coating materials that can be produced in powder or wire form can be processed in this way. During thermal spraying, the coating materials are fed into — and melted by — an energetic heat source (fuel gas oxygen flames from combustible gas, arcs or plasmas of noble gases such as argon, hydrogen, nitrogen, helium). The particles, which are either softened or fully molten, are accelerated in the direction of the workpiece and collide with it at high speed (40–600 m/s).

Solio Verde Pumpkin Seed Oil Thermal protection spray for all hair types, 150 ml. Gives smoothness and shine to the hair, makes it easier to comb the hair. Protects hair from the negative effects of the environment. It has a thermal protection effect. INGREDIENTS: Aqua, Glyceryl Stearate, Ceteareth -20, Ceteareth -12, Cetearyl Alcohol, Cetyl Palmitate, Dipalmitoylethyl Hydroxyethylmonium Methosulfate, Punica Granatum Seed Oil, Cuclopentasiloxane, Dimethiconol, Cetrimonium Chloride, Hydrolyzed Soy Protein, Cucurbita Pepo (Pumpkin) Seed Oil, Niacinamide, Cocos Nucifera (Coconut) Oil, Euterpe Oleracea Fruit Extract, Parfum, Sorbitan Caprylate, Propanediol, Benzoic Acid. HOW TO USE: spray evenly over the entire length of slightly towel-dried hair from a distance of 30 cm. Do not rinse.

A two-phase spray with dual functions: thermal protection of hair during drying or styling and repair of damage to the hair structure. The spray protects hair from excessive moisture loss, makes it more manageable and elastic. It restores damaged hair, smoothes, strengthens and makes it elastic. Protects from injury during blow-drying or styling, from external negative influences (dirt, smoke, dust, ultraviolet, cold, etc.). Helps maintain the moisture of the stratum corneum. Ceramide NP protects the hair cuticle from thinning and dehydration by forming a protective barrier that limits moisture loss and prevents hair damage. Ceramide bonds the hair cuticle cells, restoring the hair structure. Helps restore the lipid barrier of the hair. Silk peptides restore hair, protect it from damage and pollution, smooth it and give it a silky shine. Red Algae extract nourishes the hair with valuable trace elements and minerals, strengthens the hair cuticle.

Preheating of forging tools Preheating of tubes before welding Preheating before thermal spraying Preheating of moulds

Place of Origin: China Product name: WC-12Co Application: thermal spraying, HVOF, etc., HVOF, D-Gun Shape: powder, ball like Material:tungsten carbide, cobalt Chemical Composition: WC, Co, etc., Co:12.0;C:5.4;W Bal Dimensions: -325mesh/+15 um;-45 um/+15 um Flow density: 20 sec 4.4g/cm3 Color: gray Supply Ability: 80000 Kilogram/Kilograms per Year Lead time:15days Port of shipment: Xiamen Applicable process: 1.for plasma spraying (PTA) 2.for supersonic spraying (HVOF/HVAF).

Euterpa Biphasic regenerating spray for thermal protection with instant conditioning action. Ideal for caring for your hair before heat treatment such as straightening or curling with a press. It is used before drying with a hair dryer and after painting. Nourishes the scalp and hair hydrates and softens without aggravating hair becomes shinier , easier to comb and style stabilizes the neutral pH of the hair. Spray for easy combing of hair : link makes combing easier keeps hair smooth and soft nourishes and hydrates the scalp and hair gives hair radiance and shine for every hair type suitable for children and adults

The thermal protection spray is specially designed to preserve hair color and protect against high temperatures, has an antistatic effect, and makes combing easier. Silk and wheat proteins, avocado oil protect hair from UV and fading, add shine and preserve intense color for a long time. Castor oil protects the hair during styling with a hot hairdryer and iron. Keratin restores the hair structure, giving it softness and elasticity. HOW TO USE: Spray on damp hair before blow-drying or on dry hair before using a hair iron. Do not rinse.

nourish the hair along its entire length prevent split ends and blooming deeply hydrate light texture, instantly absorbed by the hair, without weighing the hair down smoothes flyaways give shine and softness without silicones and parabens ACTIVE INGREDIENTS: Argan oil – softens, hydrates, nourishes and renews the hair, protecting it from premature aging. Silk proteins – for elasticity, tenderness and softness, with a hydrating effect. Hair protection spray from heat : link Euterpa Biphasic regenerating spray for thermal protection with instant conditioning action. Ideal for caring for your hair before heat treatment such as straightening or curling with a press. It is used before drying with a hair dryer and after painting. hydrates and softens without aggravating hair becomes shinier , easier to comb and style stabilizes the neutral pH of the hair.

Euterpa Biphasic regenerating spray for thermal protection with instant conditioning action. Ideal for caring for your hair before heat treatment such as straightening or curling with a press. It is used before drying with a hair dryer and after painting. Nourishes the scalp and hair Hydrates and softens without weighing down Hair becomes shinier , easier to comb and style Stabilizes the neutral pH of the hair.

Tin and Tin alloys wires for thermal spray

Manual Arc spray equipment of all metal wires (Cu - Ni - Inox - Mo - W - Steel -Bronze - Brass - Corten)

Protective helmet used both blasting and thermal spray

Hardfacing Powders are manufactured to have the precise size, shape, and chemistry required for optimal thermal spraying characteristics. Our powders are available in a wide variety of alloys to give the workpiece desired finished qualities - whether it’s good machinability, abrasion resistance, corrosion resistance, ductility, hardness, or high strength. No matter the application, we have a powder that can be manufactured to your exact specifications and meet your coating needs. Hardfacing Process Hardfacing or surface coating is a process of spraying or welding metallic powders onto a workpiece or substrate to give it a specific hardness, wear resistance, or corrosion resistance. This process requires the appropriate alloy and particle size distribution for a specific deposition technology. Appropriately selected powders yield the best properties and manufacturing efficiencies.

Our weld wire sheathing material is used in both flux cored wire and metal cored welding wire processes. The wire sheathing is formed into a tubular product by our customers and the center of the tube contains the ‘fill’ (flux, metal powders, etc) to bring the wire to the desired chemistry. The finished wire is used across a wide breadth of industries in processes such as: Submerged Arc Welding (SMAW) Gas Metal Arc Welding (GMAW) Wire Arc Thermal Spray Flux cored welding wire producers use our metal sheathing materials to prepare finished wire for thermal spray and in surfacing applications, in high temperature and corrosive environments. Cobalt Our Ductile Cobalt Alloys are used to produce wire to hardface applications in the construction, mining, and oil and gas industry. Our proprietary process allows us to offer high Cobalt containing products (91% Cobalt or more) while maintaining a highly ductile strip for wire forming.

AMETEK offers several different Hastelloy® alloys in powder form, including but not limited to C-22, C-276, X, and B alloys. These alloys are all nickel based and used in a variety of applications where the corrosion resistance or service temperature of stainless steels is insufficient. Hastelloy® C-22 and C-276 are used heavily in severe corrosion environments by the Chemical Processing Industry (CPI), Oil and Gas (O&G), and others. Our C-22 and C-276 powders are used to create Filters for these industries, to apply coatings by thermal spray and cladding processes, and to make sintered parts. Hastelloy® B alloys are used in extremely reducing and acidic environments with unparalleled performance in such conditions. The primary application of powders of Hastelloy is in sintered metal filters. Hastelloy® X is one of the original nickel superalloys. Hastelloy® X has excellent fabricability and weldability for a high temperature nickel alloy

Characteristics of partitions and welding curtain Mavitoile Ideal for dividing off areas in factories Thermal insulation, noise, dust, thermal barrier Spray and fume control So easy to install-on fixed frame or sliding track No space limitation – Made to exact custom specifications Option : Vertical vision pane Double skin curtain to increase the insulation Made to mesure Manual door >> Modular partition in flexible curtain