Thermal oil - Import export

Whether it’s for maintaining stable temperatures in storage tanks, compensating of heat loss in supply pipes, liquefying firm substances such as wax or vaporizing water or thermal oils, electrical heaters by Klöpper Therm are the answer. Our heaters provide optimised, energy efficient and reliable process control for all kinds of plants – chemical, petrochemical and pharmaceutical – as well as power plants and refineries. Based on the client’s specifications, we verify the technical feasibility for each application and transforms it into a concrete design.

"We have different solutions at the industrial pump level. We offer two solutions in our product range: thermal oil transfer or water transfer. In the pumps offered by Focquet, we have mainly bare shaft pumps mounted on base, monobloc pumps and in-line pumps. The pump department is specialized in the overhaul of pumps of all brands and the assembly of pump units with a very short delivery time. We have a great deal of expertise and know-how in industrial pumps and a large stock of spare parts in order to respond to our customers' emergencies as well as possible."

A thermal fluid oil heater is an industrial heating system designed for the heating of specialized heat transfer fluid, also referred to as thermal fluid or thermal oil. This fluid is then re-circulated through varied parts of the process to provide controlled and uniform heating. The system has extensive applications in industries related to the precise management of temperature. Unlike high-pressure, steam-based systems, a thermal fluid heater allows for higher temperatures without associated high pressure, thus making it much safer and more efficient in many applications. These heaters can become an integral part of processes requiring uniform heating in a very broad temperature range. They offer very accurate temperature control due to indirect heat transfer through thermal oil—this is primary in maintaining quality and consistency in industrial processes.

Engines for combined heat and power plants are operated with different fuels, including hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels. In an exhaust gas heat exchanger, the hot exhaust gas from the CHP engines or CHP gas turbines is cooled, in the process heating water, a water-glycol mixture or thermal oil. This thermal energy can be used in a local or district heating system or for other industrial purposes.

"We have different solutions at the industrial pump level. We offer two solutions in our product range: thermal oil transfer or water transfer. In the pumps offered by Focquet, we have mainly bare shaft pumps mounted on base, monobloc pumps and in-line pumps. The pump department is specialized in the overhaul of pumps of all brands and the assembly of pump units with a very short delivery time. We have a great deal of expertise and know-how in industrial pumps and a large stock of spare parts in order to respond to our customers' emergencies as well as possible."

We install the necessary hoses between hydraulic power units and press cylinders. We also create piping and circuits for thermal oils and cooling water.

What you can expect from APROVIS high-temperature heat exchangers: - Transfer to water / thermal oil / air - Abrasion protection for abrasive components in the flue gas or product gas (e.g. wood gas) - Implementation of individual solutions (e.g. with regard to available space, thermal performance) - Use of various high-temperature stainless steels according to the application in question - Own measurements on site

Energy systems for industrial plants can sometimes be expensive to maintain. This is why we already pay attention to economic solutions during the planning and conception of your plant. Our heating and cooling systems are needs-based, individual solutions for seasonal and user-related requirements. Heat transfer media such as water, air or oils are heated by means of large-capacity water boilers, high-speed steam generators or thermal oil systems. In the heating systems from IFA Technology, the subsequent heat transfer takes place through half-tube coils welded onto the jacket, heat exchangers, heat transfer plates (thermoplates) or electrical heating cables.

What you can expect from APROVIS exhaust gas heat exchangers: - Efficient hot water generation in combined heat and power plants - Heating of thermal oil as an energy source - Individual solutions and compact designs - All the main components for the exhaust gas section and gas treatment are combined under one roof: proprietary products developed in-house - Cost-saving and reliable operation of the systems - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Certifications: PED 2014/68/EU, ASME Code, EAC - Can be used in all plants with exhaust gases from hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels - Geared to international standards and directives

What is a Thermal Fluid Oil Heater? A thermal fluid oil heater is an industrial heating system designed for the heating of specialized heat transfer fluid, also referred to as thermal fluid or thermal oil. This fluid is then re-circulated through varied parts of the process to provide controlled and uniform heating. The system has extensive applications in industries related to the precise management of temperature. Unlike high-pressure, steam-based systems, a thermal fluid heater allows for higher temperatures without associated high pressure, thus making it much safer and more efficient in many applications. These heaters can become an integral part of processes requiring uniform heating in a very broad temperature range. They offer very accurate temperature control due to indirect heat transfer through thermal oil—this is primary in maintaining quality and consistency in industrial processes.

Solio Verde Pumpkin Seed Oil Thermal protection spray for all hair types, 150 ml. Gives smoothness and shine to the hair, makes it easier to comb the hair. Protects hair from the negative effects of the environment. It has a thermal protection effect. INGREDIENTS: Aqua, Glyceryl Stearate, Ceteareth -20, Ceteareth -12, Cetearyl Alcohol, Cetyl Palmitate, Dipalmitoylethyl Hydroxyethylmonium Methosulfate, Punica Granatum Seed Oil, Cuclopentasiloxane, Dimethiconol, Cetrimonium Chloride, Hydrolyzed Soy Protein, Cucurbita Pepo (Pumpkin) Seed Oil, Niacinamide, Cocos Nucifera (Coconut) Oil, Euterpe Oleracea Fruit Extract, Parfum, Sorbitan Caprylate, Propanediol, Benzoic Acid. HOW TO USE: spray evenly over the entire length of slightly towel-dried hair from a distance of 30 cm. Do not rinse.

Solio Verde Pumpkin Seed Oil Thermal Protection Shampoo for all hair types, 500 ml. Gently cleanses, moisturizes, promotes softness and elasticity, easy combing. Protects hair from thermal damage.INGREDIENTS: Aqua, Cocamidopropyl Betaine, Sodium Laureth Sulfate, Decyl Glucoside, Lactic Acid, Cucurbita Pepo (Pumpkin) Seed Oil, Hydrolyzed Soy Protein, Cetrimonium Chloride, Citric Acid, Glycerin, Euterpe Oleracea Fruit Extract, Polyquaternium-10, Parfum, Sorbitan Caprylate, Propanediol, Benzoic Acid. HOW TO USE: apply to damp hair, foam, rinse thoroughly with water. Repeat if necessary.

IRW Water Cooled Type Rooftop units are designed to operate in harsh environmental outdoor conditions by its versatile, efficient and robust characteristics. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.IRW Water Cooled Type Rooftop units operates with environmentally friendly refrigerants. The air distribution and return are carried out by air ducting which is the best idea for the complex areas to cool down. Various compressor and refrigerant type usages brings trouble-free operation with high cooling water temperatures. Heating can be carried out with electrical heater, steam, hot water and thermal oil resources.

— Details depend on the characteristics of the medium to be fed (density, viscosity, solids content, temperature, reactivity, toxicological properties, etc.) and the respective process requirements (accuracy, feed rate, turndown ratio, counterpressure, etc.) —Applicable feed pumps: piston, diaphragm, gear, hose, rotary piston or eccentric screw pumps, etc. — High-tech weighing system with digital load cell DigiMASS-2 for high weighing accuracy — Heated versions available (electrical, hot water, thermal oil, etc.) Power range - Different Versions 1 - 1000 dm³/h 50 - 5000 dm³/h 100-10000 dm³/h

PRODUCT DESCRIPTION Premier SN/CF 15W/40 stands as the pinnacle of engine lubricants, tailored for professional workshops, and engineered to deliver unmatched engine protection and performance. It not only meets but exceeds the demanding API SN and CF requirements, making it the ideal choice for most petrol and four-stroke engines, especially the latest models with tighter tolerances. This exceptional oil thrives under the most challenging and diverse operating conditions, whether it’s enduring high-temperature motorway marathons or navigating the stop-and-go demands of city driving in cold temperatures. Crafted from premium technology base oils, Premier SN/CF 15W/40 boasts remarkable high-temperature performance. Its use of thermally stable base oils, oxidation inhibitors, viscosity improvers, and detergents ensures that it remains unfazed by extreme temperatures.

Heat Transfer Oils are high-performance fluids specially designed for use in enclosed, indirect heating systems. They are meticulously crafted from exceptionally refined base stocks known for their resistance to thermal cracking and chemical oxidation. These oils boast efficient heat transfer capabilities and exhibit viscosities that allow for easy pumping, both during startup and while operating at temperature. Importantly, the flash point of these fluids remains stable throughout their service life, thanks to their resilience against thermal cracking at recommended operating temperatures. Heat Transfer Oils are exceptionally thermally stable, ensuring an extended service life without the formation of deposits or viscosity increase. They feature specific heat and thermal conductivity properties that enable rapid dissipation of heat.

The automatically functioning thermal oil boilers are designed for thermal oil with a temperature of up to 400 °C. The thermal oil boiler contains a double rear wall that cools the thermal oil and is part of the VO. This makes a high boiler efficiency of 93% achievable and you will notice this in the gas consumption. Due to the lack of a bricked rear wall, periodic checks of the rear wall are not necessary. As a result, you save on maintenance. Electric thermal oil boilers are also part of our program. All thermal oil boilers can be equipped with all common gas or oil burners both ex works and on site. the burner The installation is supplied as high/low or modulating , depending on the capacity of the Inplan thermal oil boilers .s

place at Scharff Techniek. We supply a wide variety of fittings suitable for different qualities of steam, gases and thermal oil. The use of appendages is the way to improve systems that operate by means of pressure. These parts can be connected separately to, for example, a steam or oil boiler, a water supply network and are even used in shipbuilding technology.

Most of the Europem incinerators are equipped with waste heat recovery systems. Europem has supplied a wide range of waste heat recovery installations including steam boilers, thermal oil boilers, gas-liquid heat exchangers, gas-gas heat exchangers, bath heaters and air heaters. All waste heat recovery installations are tailored to the needs of the client and the optimal design of the overall installation. Our range of waste heat recovery systems include: -Fired tube boilers with or without economizer. Single pass and multi-pass systems can be supplied Boilers can be equipped with an on-line cleaning system to allow operation with dust-loaded (flue) gases Boilers up to 30 MW capacity can be supplied with pressures ranging from 10 to 22 bar. - Single pass and multi-pass systems can be supplied -Water tube boiler boilers with or without economizer Superheated or saturated steam Horizontal or vertical boiler arrangements Bundles in refractory lined casing or with membrane walls Capacities up to 40 MWth with pressures ranging from 15 to 65 bar. – Thermal oil boilers – Bath heat exchangers – Air – flue gas tube and shell heat exchangers – Flue gas – liquid tube and shell heat exchangers – Air heaters Heat exchangers can be manufactured in carbon steel or high grade alloys e.g. Duplex, Hasteloy, Inconel, AISI 316, AISI 304.

Heating technology with a future The calculation is simple, the technology successful. Efficient surface drying is achieved with biomass in Rippert plants. Together with the Hargassner company from Austria, a specialist for heating with biomass, and the proven Rippert plant know-how, the technology is now marketable and has gone into production. The demanding drying characteristics in a powder-coating plant are compatible with the process and work perfectly. A future-orientated heating technology with considerable economic and ecological benefits – the experts are unanimous in that. Wood pellets or wood chips are the inexpensive energy suppliers. They are valuable waste products that result from the processing of domestic timbers. Heating with wood chips – without intermediate heat transfer media such as thermal oil • Environmentally friendly and CO2-neutral • fully automatic boiler cleaning and ash discharge Maximum financial saving potentials are realised with this energy carrier. Wood chips, chopped to a transportable size and dried by the supplier, are stored in the storeroom near the plant. It can be located on the same level or lower. A tried-and tested transport system consisting of a floor agitator with springs and discharge auger carries the wood chips reliably into the plant. Here it acts as a fuel with maximum convenience. If the calorific value equivalents are examined, we see that 1,000 litres of fuel oil is equivalent to 12 m³ of wood chips. The ratio is the same for 1,000 m³ of natural gas. Heating with wood pellets - without intermediate heat transfer media such as thermal oil Wood pellets are true energy bundles. They consist of natural wood and are made by compressing sawdust, which is produced in large quantities every day in the industry. As a biomass they are the alternative to wood chips and are just as advantageous from an economical point of view. Pellets have the smallest volume and are conveyed dust-free and without odours from storage containers to a storage vessel next to the plant. They are transported into the combustion chamber via a rotary vane feeder and feed auger. For comparison: 1,000 l fuel oil = 2 t pellets 1,000 m³ natural gas = 2 t pellets 1,000 l liquefied gas = 1.32 t pellets Advantages • Reduction in energy costs Heating cost comparison (reference = 1,000 l fuel oil)

GEO brand drum heating furnaces are specially designed and manufactured based on the requirements of your process. It has a wide barrel capacity from 4 to 32. It offers a wide range of options with its single-chamber or multi-chambered, one- or two-layer production options, and also saves space with its multi-storey production option. Full Automation GEO barrel heating furnaces can be equipped with PLC control panel and HMI display with full automation for process control, reporting, process monitoring and also management of alarm conditions. The heating options of GEO barrel heating furnaces includes systems such as electric heating, open steam heating, and steam coils. Energy Source Open Steam Steam Coils Hot Water Coils Hot Thermal Oil Coils Superheated Water Coils

LCM 850 is a synthetic oil with exceptional performance for heavy-duty diesel engines. The 5W30 version is especially formulated for better fuel economy and extremely low ambient temperatures. LCM 850 meets the specifications of EURO IV engines. Through oil analysis, drain intervals can be extended up to 100.000 km. Benefits Optimal engine protection. Drain intervals up to 100.000 km. High quality base oils. Remarkable thermal and chemical stability. Irreproachable shearing resistance.

LCM 800 is a high performance synthetic oil for very long drain periods on heavy diesel engines. LCM 800 is highly recommended for use with EURO IV engines and through oil analysis drain intervals can be extended up to 80.000 km. Benefits Optimal engine protection. Drain intervals up to 80.000 km. High quality base oil. Remarkable thermal and chemical stability. Irreproachable shearing resistance.

Thermally stable chain oils for the use in high and low temperature applications. These extremely adherent and aging-resistant special fluids are based on ester oil, show superior corrosion protection and withstand harsh environments.

Thermally stable, adherent, synthetic oils for the preservation and lubrication of steel belts and carpet chains as well as bending and chain rods in double belt presses. They feature low evaporation loss and form a corrosion and wear protecting lubricating film.

ERC Guard Thermic for low-sulphur heating oil with a bio share and all other DIN heating oils slows the natural ageing of heating oil and contains an organic combustion enhancer. The Effect ERC Guard Thermic slows the natural ageing of heating oil. Stabilisers prevent components of the heating system from releasing into the heating oil and forming sediments, and/or accelerating the ageing of the heating oil. In the process, select active ingredients neutralise the ions already in the heating oil and apply a protective coating to the metal surfaces, which suppresses the release of new ions and protects against corrosion. In addition, the additive prevents the formation of resin-like, adhesive ageing products which arise due to the high thermal load of the heating oil within the pump and can block it. At the same time, lubrication of the pump is improved.

Thermal oil systems are used in countless production processes: the process heat conveyed by using thermal oil is needed in a number of industries. Büttner's triedand-tested thermal oil heaters are heated with ue gas and are designed as single-pass Systems.

The BTU meter RH33 is used in applications with liquid energy carriers.It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody transfer approval and allows bi-directional measurement, e.g. charging/discharging of a heat accumulator.

For the construction of its steam generators, Büttner uses the experience in steam boiler construction established at the end of the 19th century and combines this with modern technology, guaranteeing safe and protable facility operations Key features: Indirect steam generation with thermal oil Direct steam generation with ue gas from biomass combustion Debrators or reners, wax smelters, sifters and heating for buildings are just some of the applications for steam generators. Design, construction, assembly and inspection of steam generators in compliance with EN, ASME or GOST norms