Results for
WEINLICH GMBH & CO. KG
Germany
Safe, reliable and easy measurements of the exit speed made at the muzzle of firearms. Special design to be integrated into safe test rigs for material testing. Examples of application: Simulation of hailstorm on solar cells, simulation of stone-chipping on coated surfaces or on windscreens, examinations concerning the effect of projectiles on bulletproof vests, bulletproof doors and other security equipment. All models can be equipped with various possibilities to draw up test reports automatically.
Request for a quoteIIM AG MEASUREMENT + ENGINEERING
Germany
Device details: ■ 2 in 1: device contains the Hot Set Test as well as the Heat Pressure Test ■ Robust and compact set including the device and an equipment case ■ Possibility to attach a thermometer directly near the sample ■ Measurement according to the standards IEC EN 60811-507 (Hot Set Test) and IEC EN 60811-508 (Heat Pressure Test) regarding sample attachment and weight attachment ■ Precise choice of weights due to practical containers ■ Simultaneous measurement of up to 3 samples Optional - Hot Set Test complete ■ Sample rack for heat pressure and heat elongation test ■ Laser gauge ■ Thermal heat oven UN55 Size (WxLxH): 585 x 514 x 784 mm (23 x 20.2 x 30.9“) Weight: 57 kg (125.6 lbs) Volumen: 53 l Air exchange rate: 8-20x ■ Thermal heat oven UN110 Size (WxLxH): 745 x 584 x 864 mm (29 x 23 x 34“) Weight: 74 kg (163 lbs) Volumen: 108 l Air exchange rate: 8-20x
Request for a quoteIIM AG MEASUREMENT + ENGINEERING
Germany
Device details: ■ Preparation of cable samples for further processing ■ Applicable for cable types with solid core cross-sections ■ E.g. Sample preparation for cutting with ORC family
Request for a quoteIIM AG MEASUREMENT + ENGINEERING
Germany
Device details: ■ Device and operation are according to the standard IEC 60811-506 (IEC 60811-1-4) point 8.5 ■ Case set offers all required weights for the test ■ Easy operation ■ Very robust and solid construction ■ Steel impact piece included ■ Up to 3 Samples can be tested simultaneously ■ Device suitable for positioning in a cold chamber Options: ■ Cold Impact Test „one sample“ ■ Cold Impact Test „up to 3 samples“ ■ Cold Impact Test „1 x photovoltaics“ (VDE PV01:2008-02) ■ Laboratory freezer - technical specifications on request
Request for a quoteIIM AG MEASUREMENT + ENGINEERING
Germany
Device details: ■ Device and operation according to the standard IEC 60811-504 ■ The complete set offers various spindles and cable guides with many diameters: Winding spindles: 10, 14, 18, 22, 28, 30, 35, 40, 45, 50 mm outer diameter Cable Guides: 4, 7, 9, 11, 13 mm inner diameter ■ Very robust and solid construction ■ Winding spindles interlock easily and guides are easily fastened ■ Device suitable for positioning in cold chamber ■ Maneuver Ratio: 2/1: 2x Crank rotation = 1x spindle rotation ■ Spindle/Guide diameter ratio: 0.8x sample diameter
Request for a quoteQUELLTECH GMBH
Germany
Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,
Request for a quoteRUMUL RUSSENBERGER PRÜFMASCHINEN AG
Switzerland
chambers RUMUL offers a variety of customer-specific solutions to test materials at elevated temperatures
Request for a quoteKASAG SWISS AG
Switzerland
Our specialists have vast knowledge and many years of experience in non-destructive testing (NDT) of welding seams, welding constructions, pressure vessels, containers, equipment and plants. We use and offer the following testing procedures for that purpose: X-rays RT Dye penetrant testing PT Visual inspection VT Material testing/ Positive Material Identification PMI Helium leakage testing LT Riboflavin test Pressure tests of up to max. 1000 bar Surface roughness testing Ra/Rz Ferrit measurement Fe Wall thickness measurement Video endoscopy Pressure-loss test (liquid) With KASAG, you remain on the safe side.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The RESISTOMAT® model 2311 has been designed and optimized for high-speed applications in automation systems. Up to 100 measurements per second can be achieved. It works on the basis of the welltried four-wire measurement method in which test-lead resistances and contact resistances are eliminated. The instrument leads are monitored for damage by a built-in open circuit detector. A 2-way and 4-way comparator with switching outputs is available for classifications and selections. Of course, temperature compensation is available for any test object material. Specific temperature coefficients can be entered. Temperature recording takes place using a PT100 sensor or a temperature transmitter (pyrometer) with an analog output. A special circuit for protecting the measurement input when measuring inductive test objects has been developed to prevent damage to the meter from voltage peaks produced when the test object is disconnected.
Request for a quoteBÜRKLE GMBH
Germany
The Powder Sampler Mini is a stainless steel sampler for small quantities. When the button is pressed, a sampling rod enters the sample material and retracts when released. In this way, a fixed amount of sample material is enclosed in the sample notch of the rod and removed. The sampler precisely collects 0.01 ml, 0.05 ml and 0.1 ml sample volumes, depending on the version. With an insertion depth of up to 300 mm, multiple target point samples can be collected at different depths. The small-volume powder sampler is made of high-quality stainless steel 1.4404/1.4571 (316L/316Ti). The Mini powder sampler is used for sampling powdery products from small containers, sacks, drums or open containers. Primarily in the pharmaceutical, medical products and biotechnology sectors, e.g. for testing raw materials, active ingredients and excipients.
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
The industry standard for test reliability Our pregnancy and ovulation wicks deliver proven performance and reliability. As the industry standard for home pregnancy and ovulation testing around the world, our products are optimized with precise capillary action, high purity and proprietary color change technology to: Improve sensitivity and specificity of pregnancy and ovulation rapid tests–Customized geometries and material formulations create a capillary structure that optimizes wicking, absorption and controlled delivery to the test site quickly. Provide method assurance and sample indication – Visual and physical indicator technology can be engineered to meet specific test platform requirements. Minimizes non-specific binding–Proprietary materials and manufacturing help generate components that provide higher recovery of analytes and is pH “agnostic” to handle a wider range of samples. Features Ideal capillary structure and controlled delivery of sample to test...
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
The industry standard for test reliability Our pregnancy and ovulation wicks deliver proven performance and reliability. As the industry standard for home pregnancy and ovulation testing around the world, our products are optimized with precise capillary action, high purity and proprietary color change technology to: Improve sensitivity and specificity of pregnancy and ovulation rapid tests–Customized geometries and material formulations create a capillary structure that optimizes wicking, absorption and controlled delivery to the test site quickly. Provide method assurance and sample indication – Visual and physical indicator technology can be engineered to meet specific test platform requirements. Minimizes non-specific binding–Proprietary materials and manufacturing help generate components that provide higher recovery of analytes and is pH “agnostic” to handle a wider range of samples. Features Ideal capillary structure and controlled delivery of sample to test...
Request for a quotePOREX TECHNOLOGIES GMBH
Germany
The industry standard for test reliability Our pregnancy and ovulation wicks deliver proven performance and reliability. As the industry standard for home pregnancy and ovulation testing around the world, our products are optimized with precise capillary action, high purity and proprietary color change technology to: Improve sensitivity and specificity of pregnancy and ovulation rapid tests–Customized geometries and material formulations create a capillary structure that optimizes wicking, absorption and controlled delivery to the test site quickly. Provide method assurance and sample indication – Visual and physical indicator technology can be engineered to meet specific test platform requirements. Minimizes non-specific binding–Proprietary materials and manufacturing help generate components that provide higher recovery of analytes and is pH “agnostic” to handle a wider range of samples. Features Ideal capillary structure and controlled delivery of sample to test...
Request for a quoteHAGO BAUTECHNIK GMBH
Austria
Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof (not guaranteed to be completely watertight). Virtually invisible when installed. EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GDZ cover can be opened and closed by one person. Central locking system: HAGODECK Type BV-GDZ steel cover is equipped with a central locking system. The cover can be opened from above using a special socket key and easily unlocked from underneath using the built-in handle. Safety device fitted to prevent the open cover from closing. Applications: For covers that need to be opened from above and below, quickly and without particular effort, e.g. in underground passageways, in underground railways, power stations, telecommunication or military facilities...
Request for a quoteROCHOLL GMBH
Germany
Many of our customers are active in the aerospace industry. In this area, we offer test specimens made of aerospace metals like aluminum, titanium, or steel. All materials have been certified according to the relevant aerospace standards. Upon request, we will provide you with an authoritative certificate, including an acceptance test certificate (WAZ – CoC), positive material identification (PMI) and a production-related test report. Do your requirements include additional pre-treatment such as various anodizing processes (TSA or CAA) or electroplating, for instance cadmium or silver plating? We will be happy to meet your demands. After all, your satisfaction is particularly important to us.
Request for a quoteMYCOTRITION GMBH
Germany
Pure extract, standardised for polysaccharides. Polysaccharides are extracted from the chitin cover in the mushrooms using hot water. Compared with the powder, the extract has around 10 times the concentration of polysaccharides. Our powders are gained from the gently dried fruiting body of the mushroom by grinding it finely. The grain size < 0.125 mm is a sign of quality. All raw materials are tested for 250 parameters and aromatic hydrocarbons. The corresponding lab analyses and certificates are supplied to you with every batch. Extract organically grown – standardised to 30% polysaccharides Extract conventionally grown – standardised to 30% polysaccharides Mushroom powder organically grown Mushroom powder conventionally grown
Request for a quoteResults for
Tests on materials - Import exportNumber of results
138 ProductsCountries
Company type
Category