Terminal blocks - Import export

NSPV Terminal block 2P-20P Features: Heavy duty, corrosion resistant screws.

"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."

Use: The arrangement as series terminals allows a large number of connections with a low space requirement. Mechanical design: • Housing of Duroplast. • The design reliably prevents short-circuits. • The terminal width of 5 mm allows the maximum number of connections with the lowest possible space requirement. • Screw connections for easy and quick installation. • Installation parts set available as an accessory, including all additional parts required for rail installation. • Contact bridges of original thermocouple materials.

Use: Terminal rails enable the easy connection of thermocouples or resistance thermometer measurement circuits in junction boxes or on the rear side of devices. Mechanical design: • Core material of fibreglass-filled nylon • Insulators between the contacts prevent short-circuits. • Screw connections for easy installation. • Available in a wide range of thermo-pairings. • Dimensions suitable for the use of cable-shoes A-20.131-(…) and A-20.132-(…).

Terminal board, terminal block, terminal rail: no matter what you call it, we deliver what you need for an interface to your current-transmission solution. Terminal boards serve to connect cables and conductors in electric motors and electrical systems. Housed in separate terminal enclosures, they form the interface for the cabling to the outside world. Depending on the field of application, terminal boards from MACK are produced from different moulding compounds. Round or oblong hole, different measurements, fixing-hole spacings and pin sizes – you will undoubtedly find the right terminal board and terminal accessories amongst our assortment.

SPIROL specializes in the manufacture of precision machined AAR Nuts for the railroad industry. SPIROL's Railroad Nuts are held 100% square to the tap. SPIROL's thread pitch diameter allowances are engineered for ease of assembly after plating, yet manufactured to strict standards with specific gages. Each production lot has a unique identification number and is traceable through each manufacturing process back to the original raw material test certificate. SPIROL's Railroad Nuts, otherwise referred to as AAR Clamp Nuts, Binding Nuts, and Gold Test Nuts or AAR Signal Nuts are used in signal lights, crossing bells and terminal blocks.

From 8 to 72 Modules Ergonomic opening / closing system Precise design with blank or smoked door Operating Temperature; -25 to +60C Hinged door which opens more than 180° Ready to install the terminal blocks for neutral and earth connection

LumiLife are one of the leading names in LED trade lighting, offering a range of products including LED panels, tube lights, floodlights and downlights that are designed to provide long-lasting illumination while helping customers save on energy costs. For indivudual product details please see below the product description which includes a downloadable product data sheet. Reduce installation time with the new 3P push-in terminal block, also known as 'quick connector'. With the new and updated GU10 fitting, the quick connector is included to make installation even easier. The connector gives you easy access with large terminals and fast connection. Cut-out: 85mm 30º Tilt (one direction) Part B (Fire Safety) Part C (Resistance to Moisture) Part E (Resistance to Sound) compliant

Thermalert 4.0 infrared temperature sensors provide accurate temperature measurement from -40 °C to 2250 °C (-40 °F to 4082 °F) for a wide variety of process control applications. • Durable stainless steel IP65 / NEMA4 enclosures designed to withstand ambient temperatures from -20 °C to 85 °C (-4 °F to 185 °F) • Integrated laser sighting • Galvanically insulated outputs • Plastic lens option for food applications • Analog input for ambient compensation and adjusting emissivity setting • Multiple interfaces – 2-wire loop powered for analog and digital communication – 12 wires M16 and 6-pins terminal block for digital communication (RS485) • USB for easy setup • Simple, two-wire or digital installation • Advanced signal processing • Wide choice of focus distances • 2-year guarantee The program includes various models and accessories. The DataTemp® Multidrop software enables easy configuration and process monitoring on a real-time graphical display.

Housing: rugged and light-weight aluminum alloy functioning as platformfor light bars and driver compartment, and lighting control interfaces (e.g.Zhaga sensor ready connector, NEMA receptacle). Mounting bracket: powder-coated aluminum alloy. Lightbars: extrusion aluminum heatsink, aluminium PCB with 18 LEDs mounted, UV resistant polycarbonate 18-in-1 optic lens cluster, micro terminal block on PCB, and connector for toolless wiring. IP67 and IK10 rated. Hardware: 304-grade stainless steel nuts.

Plinth Infrared Heaters feature stylish design, they are slim, but you’ll be surprised by the amount of warmth they can generate! Designed to be mounted at the bottom of the wall, just above the floor, which makes them barely visible. Made of powder-coated sheet metal, it has a very lightweight (2kg) and very slim design (15 mm thick). If you need more heat in the room, multiple plinth heating panels can be connected in a parallel chain (up to 15 heaters in one chain). For this purpose, a terminal block is provided on the rear side of the heater. Key Advantages include: don’t burn oxygen, have zero maintenance fee, save up to 40% energy compared to other models, quickly warms up surrounding objects, silent during operation, don't blow dust, pollen, or other allergens. Effective heating area is 3-5 m².

Fieldbus power conditioner applies to Foundation Fieldbus and PROFIBUS PA control system and provides power to bus-powered devices. Matched with Fieldbus terminator, it adopts uniform impedance characteristic to reproduce bus signal perfectly. NCS-BP105 Fieldbus Power Conditioner: NCS-BT105 Fieldbus Terminator: 1. Bus power supply, suitable for fieldbus conforming to IEC 61158-2 standard 2. Comply with the FF-831 bus power supply test specification 3. Support power supply redundant connection 4. Active impedance control method 5. Servo voltage output, meeting the requirements of long distance power supply

Compur Statox 502 Control - and Common Alarm Module The All – Rounder in Gas Detection No matter if you want to detect toxic or combustible gases: This control module works with any sensor head. It provides the power supply and processes the signal. Three highly rated relays and a 4 – 20 mA output are the interfaces to peripheral instrumentation. Potential front ends may be the Statox 501 or Statox 505 transmitters with electrochemical or infrared sensors, or sensor heads with a Wheatstone bridge signal such as Statox 501 PID, catalytic or the Statox 501 LC and MC series with infrared sensors. Just by the push of a button you can program the module to handle 4 – 20 mA sink or source. Even the bridge voltage can be set to any value between 2 and 5.2 V, it even works with sensor heads of other manufacturers. So there is no restriction at all when selecting the appropriate sensor head for you application. With its two “sense” lines it can even compensate the voltage drop in the cable for very remote sensor heads or if there are extreme temperature variations. For maximum flexibility the measuring range is user programmable. You can also select the unit, no matter if it is ppb, ppm, % LEL or % volume. Easy installation The control module is mounted on a standard DIN rail. With an optional power rail you can interface the 24 V DC power and the alarm signals. This way you can program one of the modules to operate as a common alarm module. Even this function can be programmed just by push button. The application of a control module as a common alarm module is a very useful feature. It displays when any of the modules goes into Alarm 1, 2 or system alarm, and controls peripheral alarm devices. All electrical contacts are located easily accessible on the front side. The terminals for alarm signals, analog output, sensor head connection run into 6 pluggable terminal blocks. This makes not only the first installation quick and easy, but also any service event or system modification. A module can easily be removed out of its row, without interrupting its neighbors or disconnecting wires. Intuitive User Interface You want a gas detection system that needs little or no attention. No matter if setting the initial parameters or performing scheduled calibrations or proof tests: The handling shall be safe, quick and easy. The password - protected Statox 502 software structure is so clear that most menu items are self - explanatory. The “Reset” button brings you time back into the measuring mode at any time. Even if you have to interrupt your work and forget to reset, the watchdog function returns the system into the measuring mode, if no button has been pushed for a while. Functional safety paired with utmost system flexibility The Statox 502 complies with the standards DIN EN 61508 and 61511 functional safety, level SIL 2. In context with the HRC or ARE sensor heads you can create a complete gas detection system for combustible gases complying with SIL 2 standard. In larger installations signals of gas detectors often run into SIL certified process control systems, in smaller plants there is a need for a control module complying with SIL requirements. As any combination sensor head / control module forms a complete gas detection system, this system closes the gap. It is expandable without limits, and there is no restriction to the mix of sensor heads connected. Connecting other front ends The versatility of the Statox 502 does not end with gas detection. You can connect any front end providing a 4 – 20 mA analog signal or a Wheatstone bridge signal. So you can create your own compact control system for a variety of sensors with just one type control device. Accessories Useful accessories such as calibration adapters, intrinsically safe repeaters, Power supplies etc. complete the system. 205 VAC, 8 A min. make or break power >/= 12 V, 10 mA, contakte silver / nickel

Any device is only as reliable as the sum of its components. With more than fifteen years of experience in manufacturing tuned and detuned filter reactors for power factor correction, we are now offering our range of line reactors for application in power electronics. Same as with our capacitors, we focus on minimized power losses and maximum durability of the reactor – optimized for your application. Made of high-class transformer sheets and copper wire or aluminium band. Vacuum-impregnated with environmentally friendly, low-styrole resin for long operating life, high voltage strength and low noise levels. Standard terminals: copper terminal lugs, optional with screw-terminal blocks or cables. Integrated reversible thermal switch for monitoring of the reactor and control of external disconnection in case of overheating. Our standard range covers 400V 50Hz up to 300A per phase. Other values are available on request.

Terminal block marking with strong hooks for safe snap mounting. Material PVC Colors White or orange Print Etching Ink or Ink Text Alphanumerical and special characters. Temperature range Shape permanence between –30°C and +60°C (–22°F to +140°F) (PVC). Resistance Flammability resistance according to L94-V0. Resistance to chemicals meets Partex Product Test Programme. Resistance to temperature and ageing meets norms of Partex Product Test Programme. Attachment Snap-on

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-4080 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial switch: uplink 4 SFP/1G, 8 ports PoE 30W; Power Supply 48VDC-360W or UPS NR-48VDC-360VA

Profile for wire, cable, circuit card and component marking. Material Semi hard PVC that complies with RoHS and Reach. Colors White and Yellow Temperature range Work temperature: From –20°C to +60°C (–4°F to +140°F). Stocking temperature: +10°C (+32 °F) to +27°C (+81°F). Resistance Flammability resistance according to UL94-V0. The substrate has excellent resistance against UV, ageing and chemicals. Performance with print depends on printing method. Attachment PT+, PTC, PTM, PM sleeves and terminal blocks.

Plotter with plates for PARTEX neutral wire, cable, component and terminal markers. Print Printing method: Plotter pens with etching ink Drawing speed: Max 40mm/s (1.57 tum/s) Temperature range Working temperature: +10ºC to +35ºC ( 50ºF to 95ºF) Storage temperature: -10ºC to +50ºC ( 14ºF to 122ºF) Recommended profile temperature: +20°C ( 68ºF) Resistance The products intended for MK500 is tested according to Partex Product Test Programme by the Swedish Test and Research Institute. Mark Type Groups MK500 print on : Wire markers PA+02 PA+1 PA+2 Open wire markers PC-10 PC-20 PC-30 PC-40 Cable markers PK2 POH Component markers PN PS Terminal block marking TX-61 TX-96

NSBon-10 is a surge protection device suitable for AC 50/60Hz, rated voltage up to 275V. It protects user's equipment to indirect and direct lightning effect or other transient overvoltage. NSBon-10 surge protector is designed according to IEC 61643-1/GB 18802.1 and can be applied for TNS power supply systems. NSBon-10 is a single DIN-rail mounted module that is easy for installation and maintenance and should be installed close to the protected equipment. NSBon-10 surge protector has a relay output that is shorted until there is no fault and the device is operating properly. The relay is open after internal thermal disconnection device actuation and failure. The device has L,N and PE terminal blocks for wires up to 2,5 sq. mm.

NSBon-11 is a surge protection device suitable for AC 50/60Hz, rated voltage up to 280V. It protects user's equipment to indirect and direct lightning effect or other transient overvoltage. NSBon-11 surge protector is designed according to IEC 61643-1/GB 18802.1 and can be applied for TNS power supply systems. NSBon-11 consists of two pluggable DIN-rail mounted modules that are easy for installation and maintenance and should be installed close to the protected equipment. NSBon-11 surge protector has LED indicator that is on until there is no fault and the device is operating properly. The LED is off after internal thermal disconnection device actuation and failure. The device has L,N and PE terminal blocks for wires up to 2,5 sq. mm.

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-4161 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial switch: uplink 2 SFP/1G + 2 TP/1G, 16 ports TP/1G PoE 30W, G.8032 ERPSv2, DI/DO;

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-4082 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial switch: uplink 2 SFP/1G + 2 TP/1G, 8 ports TP/1G PoE (2x 60W + 6x 30W);

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-4084 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial switch: uplink 4 SFP/1G, 8 ports PoE 30W; Power Supply 48VDC-360W or UPS NR-48VDC-360VA

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. Glass Reinforced Polyester enclosures, NSP-xxyy series are used for NSBox-p4044 access Nodes. The basic equipment includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly:

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-4044 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial switch: uplink 4 SFP/1G, 8 TP/1G ports with PoE various power; Power Supply 55VDC-360W or UPS NR-48VDC-360VA

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-4042 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial switch: uplink 2 SFP/1G + 2 TP/1G, 4 ports TP/1G PoE 30W; Power Supply 48VDC-150W or UPS CR-48VDC

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-2080 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial switch: uplink 2 SFP/1G, 8 ports 10/100T PoE 30W; Power Supply 48VDC-360W

The NSBox access Nodes are devised for the deployment of protected outdoor Video Surveillance systems. The Nodes provide trouble proof operation of connected video cameras with a secure power supply, reliable data transmission, and protection of sensitive equipment from surges caused by lightning and power fluctuations. It is a perfect technology solution for time and money saving in any outdoor Video Surveillance projects for a large-scale area ranging from construction sites, parking lots, hotels, parks, shopping mall, sports facilities, airports, railways, bridges, and highways. The basic equipment of the NSBox-2041 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: Managed Industrial switch: uplink 2 SFP/1G + 1 TP/1G, 4 ports TP/1G PoE 802.3bt, G.8032 ERPSv2, DI/DO;