Technical coverings - Import export

TECHNICAL DEFINITION Interior finishing plaster. Can be used with Airless spray. It provides a fine, uniform and even finish and is easy to sand. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. The resulting paste is off-white in colour. COVERINGS Primer coat, paint, wall coverings. TECHNICAL PROPERTIES • Density : 1.8 • Dry extract : 73% STORAGE 18 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES. Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. Scrape, brush and remove dust from concrete, plasterboard and plaster tiles. APPLICATION Manual application : With a trowel or filling knife. Mechanical application : Airless and spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 80 cm from the substrate.

TECHNICAL DEFINITION SEMIN AIRLESS COVER is an indoor coating that can be Airless sprayed. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivatives, preservation agent and various additives. The resulting paste is white and its consistency is adapted to its airless application. ACCEPTED SUBSTRATES • Fair-faced concretes. • Plasters boards. • Old droplets • Porous concrete PACK SIZE 25 kg. Plastic bags and tubs. SUITABLE SURFACES The SEMIN AIRLESS GARNISSANT layer can be applied with the help of an acrylic or gloss paint. TECHNICAL CHARACTERISTICS • Dry extract : 72% • Density : 1;88 • COV : < 1g/ litre APPLICATION SEMIN AIRLESS covering layer is sprayed in two steps : the first must be smooth with the help of a 60 cm blade, after drying the second one must be smoothed with the blade. The product must be sprayed at about 80 cm from the support. TIP : Lift filters before spraying.

TECHNICAL DEFINITION Ready mixed filler for interior and exterior finishing work on walls and ceilings OSCAR is a water based filler giving a finish identical to oil based products. COMPOSITION AND APPEARANCE Resin emulsion containing calcium carbonate, rheological agent and various additives. The resulting paste is white. ACCEPTED SUBSTRATES Interior walls and ceilings • Plasterboard • Old paint • Plaster blocks • Primers Outside walls • Smooth concrete • Fine floated cement SUITABLE SURFACES • Wallpaper • Paint • Wall coverings • Thick plastic covering (RPE) TECHNICAL CHARACTERISTICS • Paste density : 1.9 • Particle size : very fine • pH : 7 APPLICATION Application is manual using a float or a painter’s knife. The maximum thickness will be 1 mm per coat. Smooth and sand if necessary before OSCAR has entirely set. Clean tools with water.

TECHNICAL DETAILS Powder filler for all types of interior filling work on uneven substrates (rough precast concrete, for instance). COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Interior walls and ceilings: Bubble concrete, bare concrete, cellular concrete, irregular plaster, heating ceiling, uneven surfaces, etc. OVERLAYING After the filler has dried completely, suitable for covering with all types of plaster-based coatings, thick coatings, wall paper or wall coverings. TECHNICAL CHARACTERISTICS • Granulometry : Up to 0.2 mm • Adhesion : complies with NFT 30 608 • pH : neutral PACK SIZE 5 and 25 kg bags on shrink-wrapped pallet. STORAGE 9 months in unopened original packaging stored away from moisture. PREPARATION OF SURFACES Surfaces must comply with DTU 59.1, i.e. be clean, dry, dust-free and free from all traces of form oil.

NOVOPLAST – plasticized PVC The title NOVOPLAST ® indicates plasticized PVC granulates. It is a mixture of various additives combined suitably according to its further use. The most important additives to plasticized mixtures may in addition to PVC and plasticizers include thermal stabilisers, lubricants, separation agents, filling agents, pigments, flame retardants, light stabilisers, antioxidants, various modifiers, etc. The content of plasticizer in the mixture is determined by final hardness of the mixture. Hardness of resulting mixtures ranges from 45 degrees on the Shore A scale to the hardest Novoplast – 60 degrees on the Shore D scale. Novoplast granulates are processed subsequently using mainly extrusion, injection moulding, and mould pressing technologies. Final products manufactured from plasticized NOVOPLAST® granulates are various types of hoses, hoses with special resistance against gasoline, diesel, oil, frost, etc., technical mouldings, floor covers, outsoles,...

The GWZ 5116 is a backlash-free, torsionally stiff metal bellows coupling in line shaft design. Because of the double cardanic system, the compensating of high shaft displacements are possible. Due to the flange connection, the radial mounting is possible. Torsionally stiff and flexible line shafts are used in applications where torque and rotational motion combined with the highest possible angular precision should be transmitted or considerable distances between shafts need to be bridged. The application range of line shafts covers almost all technical areas, where mechanical power transmission and stiffness are important: Torsionally flexible line shafts with elastomeric spider Absolutely backlash-free Installation length up to 4 m possible Compensation of axial, radial and angular misalignment Cost-effective, simple assembly Maintenance free Variable length of the intermediate steel or aluminium tube Backlash-free elastomeric spider Excellent transmission of torque and...

The GWZ 5106 is a backlash-free metal bellows coupling in line shaft design. Because of the double cardanic system, the compensating of high shaft displacements are possible. The clamping hubs in split hub design can be mounted lateral at the aligned shaft extensions. Torsionally stiff and flexible line shafts are used in applications where torque and rotational motion combined with the highest possible angular precision should be transmitted or considerable distances between shafts need to be bridged. The application range of line shafts covers almost all technical areas, where mechanical power transmission and stiffness are important: Torsionally flexible line shafts with elastomeric spider Absolutely backlash-free Installation length up to 4 m possible Compensation of axial, radial and angular misalignment Cost-effective, simple assembly Maintenance free Variable length of the intermediate steel or aluminium tube Backlash-free elastomeric spider Excellent transmission of...

The clamping hubs in split hub design can be mounted lateral at the aligned shaft extensions. Torsionally stiff and flexible line shafts are used in applications where torque and rotational motion combined with the highest possible angular precision should be transmitted or considerable distances between shafts need to be bridged. The application range of line shafts covers almost all technical areas, where mechanical power transmission and stiffness are important: Torsionally flexible line shafts with elastomeric spider Absolutely backlash-free Installation length up to 4 m possible Compensation of axial, radial and angular misalignment Cost-effective, simple assembly Maintenance free Variable length of the intermediate steel or aluminium tube Backlash-free elastomeric spider Excellent transmission of torque and compensation of misalignment High transmission accuracy Temperature range -30° to +120° C / -22 F to +248 F Torsionally stiff line shafts with metal bellows Absolutely...

Servo-insert coupling with clamping hubs. Torsionally stiff and flexible line shafts are used in applications where torque and rotational motion combined with the highest possible angular precision should be transmitted or considerable distances between shafts need to be bridged. The application range of line shafts covers almost all technical areas, where mechanical power transmission and stiffness are important: Torsionally flexible line shafts with elastomeric spider Absolutely backlash-free Installation length up to 4 m possible Compensation of axial, radial and angular misalignment Cost-effective, simple assembly Maintenance free Variable length of the intermediate steel or aluminium tube Backlash-free elastomeric spider Excellent transmission of torque and compensation of misalignment High transmission accuracy Temperature range -30° to +120° C / -22 F to +248 F Torsionally stiff line shafts with metal bellows Absolutely backlash-free Installation length up to 4 m...

Regular thickness sanitary napkins, with protection wings. With a super absorbent, Hyperdry cover. Technical characteristics Extra soft hygienic topsheet , for protection without irritation Extra absorbent core Protection wings

Sanitary napkins with super-absorbent cover and protection wings, specially designed for cases of very heavy flow or night use. With an innovative core of double* absorbing capacity that retains up to twice the amount* of humidity. Thanks to the revolutionary"CenterPlus" technology, featuring an extended core in the center that ensures up to 30% more* absorbing surface, they offer unique side leakage protection, where it is needed most. Dermatologicallytested. The first to be recommended by the Greek Union of Gynaecologists and Obstetricians and the first in Europe tobeOeko-Tex® Standard 100 certified for absence of harmful substances. *Compared to other thin napkins Technical characteristics Super-absorbent cover, for a unique feeling of dryness Core of double* absorbing capacity that retains up to twice the amount* of humidity Center Plus technology, featuring up to 30% more* absorbing core in the center, for enhanced leakage protection Protection wings

Ultra thin sanitary napkins, with protection wings. Thanks to their skin - friendly extra-soft hygienic cover that contains cotton , they offer softness and complete hygienic protection , without irritations . Moreover, thanks to the revolutionary Center Plus technology , that ensures up to 30% more absorbing surface in the center , compared to other ultra thin napkins , they offer unmatched leakage protection . Dermatologically tested , the first to be recommended by the Greek Union of Gynaecologists and Obstetricians and the first in Europe to be Oeko-Tex ® Standard 100 certified , for absence of harmful substances . Technical characteristics Extra-soft hygienic cover that contains cotton, for protection without irritations Center Plus technology, featuring up to 30% more absorbing core in the center, compared to other ultra thin napkins, for enhanced leakage protection Side protection wings Individual wrapping Oeko-Tex® Standard 100 certified, for absence of harmful substances

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides, additionally it can be varnished on one or both sides. This material can be produced in different colors.

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides, additionally it can be varnished on one or both sides. This material can be produced in different colors.

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides, additionally it can be varnished on one or both sides. Material can be produced in different colors.

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides, additionally it can be varnished on one or both sides.