Tank heaters - Import export

The series 800 heating inserts offer the same unique technical advantages as our standard heaters. With adaptable specific surface load and compact desing, these heating inserts are perfectly suited to keep the temperature in tanks at the required level. The series 800 heating inserts come with welding flange for horizontal installation in tanks. Control caninets with alectronic controllers and stageless power regulation are available as options. Features medium o, e pump No control No pressure (max) 10 bar power (max) 300 kW temp (max) 150 °C

CSN® tank heating units are particularly suitable for the direct heating of liquids (Oil, Water, Emulsions), air and gases. They contribute to the avoidance of paraffin clouds in fuel oil or Diesel storage tanks. In relation to the process, we provide you with tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. We offer our series “THF” a suspended, on a chain flexible solution to keep heating oil or diesel fuel in the extraction line pumpable. As a fixed version, we recommend our industrial immersion heaters for heating liquids. Further information about our CSN® Tankheizkörper

Immersion heaters from 0,1 kW up to 300 kW for tank heating or as components for machines: - Lube oil heaters for compressors, pumps, turbomachinery, refrigeration machines and others - Tank heaters for oil, water and other liquids - Gas heaters for process applications - Anticondensation heaters for electrical motors and machine housings Range from 0,1 kW up to 300 kW ATEX, IECEx, TR-CU and other international certificates

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. All oil fired indirect IDE devices take place with help of a Danfoss® injection pump. As well, these models have an easy reachable fuel filter on the outside. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

We manufacture steel or aluminium tanks and vats for wide range of industry. We provide tanks and vats according to customer drawings. Our production and welding services are in accordance with ISO 3834-2 and other certificates we own: EN 1090, EN 15085, DNV-OS-C401, 9001:2015 and ISO 14001:2015. WE can produce wide range tanks and vats according to yours drawings. At clients’ request Base Group can produce: Water Heater Tanks, Water Storage Tanks, Heat Exchangers Tanks, Stainless Steel Process Tanks, Expansion Tanks, Heating/Cooling Package Units, Food Industry Tanks, Chemical Industry Tanks.

Metal Hoses For Water ** / Size: (30 cm- 40 cm- 50 cm- 60 cm- 70 cm- 80 cm- 90 cm- 100 cm- 120 cm- 150 cm- 200 cm) / Hose Type : Standard Corrugated Metal Hose / Hose Material : Stainless Steel AISI316L / Cover : Non-covered / Connection : Female-Female / Male-Female / Standard : EN 10670 *** Application Areas: Heating Systems / Combi connections / Water heaters connections / Room Heater Radiator Connections / Tank connections

The ThermoCar is an electric engine heater using the thermosiphon system. As the temperature of the coolant in contact with the heating element increases, its density will decrease, causing the coolant to move towards the upper part of the engine. The coolant leaving the heating unit of the ThermoCar is replaced by cold fluid from the engine. Repeating this cycle will enable the coolant to circulate naturally. The engine heater can be turned on a few hours before the engine is started, or operate on stand-by to maintain the engine at the required temperature at all times. This ensures an easy full power start whatever the ambient temperature and avoids cold start mechanical damage. The system has the following advantages: fuel savings, decreasing pollution, reduced engine wear, no more difficult cold starts. C’est un système universel, fiable, facile à monter et ne nécessitant aucune maintenance. The ThermoCar heaters are suited for all industrial applications, either stationary (smal

Round hot tub "Furako" 180 * 120cm made of varnished pine polypropylene insert and external stove 25 kW Hot tub material: Pine, stainless steel hoops External stove 25kw: Stainless steel AISI 304 2mm. MATEA production. Rivet thickness: 45 ± 2mm Polypropylene insert + lacquer coating + External wood-burning stove with connection kit + Chimney of two elbows 1m each with canopy (for an external stove) + External ladder + Circular stove + Solid wood paddle + Plumbing drain + Wooden lid for 2 halves made of varnished pine

Outdoor vat with oven MATEA is made of food-grade stainless steel AISI 304 2mm with an external wood-burning stove 25 kW. Scope of supply includes the following: a bath tub, an external stove with a connection kit and a chimney, a metal stand, painted in black, a larch ladder, larch internal lining (seats, backrests and flanges). The internal diameter of the vat is 180cm, the depth of the vat is 115cm, the height on the stand is 140cm. The water is heated by the natural circulation of water through the double-walled wood stove. Firewood burns in the stove, and the bottom of the vat does not interact with the fire, so the vat will not lose its aesthetic look, will not burn out and will last a long time.

Round hot tub Furako 180*120cm made of varnished pine polypropylene insert and internal stove 25 kW Hot tub material: Pine, stainless steel hoops Internal oven 25 kW: Stainless steel AISI 304 2mm. MATEA production. Rivet thickness: 45 ± 2mm Polypropylene insert + lacquer coating + Internal wood-burning stove with three circulation pipes + Chimney consisting of one elbow 1m long with a canopy (for the internal stove) + Stove grillage + External ladder + Circular seat + Solid wood paddle + Plumbing drain + Wooden lid for 2 halves made of varnished pine Ash Cleaning set. Special kit for indoor stoves, stainless steel scoop and poker with long handles for easy ash removal. It is made of food grade stainless steel AISI 304. The set includes a reliable bracket for wall mounting. AISI 304 stainless steel products do not rust and do not change their appearance during operation. Our set will last a long time and will delight its owners.

QubeX is unpressurized hot water storage tank, hygienic water heater and drain back reservoir in the same time.

For precision component critical cleaning and drying applications including validated processes. Future proofed design with a 5-year manufacturer’s warranty. - Designed to use all types of non-flammable degreasing solvents including HFE, Novec, nPB. - All machines manufactured in the UK. - All stainless-steel construction – traceability certification available. - Specialised fabrication available if required. - Pickled, passivated and electro polished to extend operation life. - Sealed, sliding lid to ensure solvent retention. - Multi-frequency ultrasonic transducers. All ultrasonics used sweep frequency technology. - Heated tanks have direct contact tube heaters for energy efficiency and longevity. - Etc. ** Click for more **

For precision component cleaning & degreasing applications. - For use with all aqueous detergents - All tanks manufactured in Staffordshire. - All stainless-steel construction – traceability certification available. - Pickled, passivated and electro-polished to extend operational life. - Heated tank utilising direct contact tube heaters for energy efficiency and longevity. - Thermostatically controlled. - Bolt-in removeable ultrasonic transducer plate. - Bolt-in ultrasonic transducers ensure minimal downtime and extend tank life. - Multi-frequency ultrasonic transducers. All ultrasonics use sweep frequency technology. - Separate ultrasonic generator. - Industrial standard – continually rated. - Insulated frame. - Basket and lid inclusive. - Table top or bench inset mounted. - Operates from standard mains voltage. - CE Certified – UL approval also available. - Etc. ** Click for more **

Infinitely variable equipment for precision component cleaning, degreasing, passivation and drying applications. - Fully automated and manual options available, - All stainless-steel construction – traceability certification available, - Pickled, passivated and electro-polished to extend operational life, - Heated tank utilising direct contact tube heaters for energy efficiency and longevity, - Thermostatically controlled, - Bolt-in removeable ultrasonic transducers ensure minimal downtime and extend tank life, - Multi-frequency ultrasonic transducers. All ultrasonics use sweep frequency technology, - Separate ultrasonic generator, - Particulate filtration of process tanks ensures highest level of component cleanliness, - Filter micron size to client specification – sub micron available, - Automated processing controlled using PLC ladder logic and an HMI touchscreen, - Etc. ** Click for more **

The VTN series heat accumulators are made from food-grade stainless steel (AISI 304, 316, 321), offering excellent corrosion resistance. Their smooth inner surface prevents scale formation, making them ideal for applications with strict water quality requirements. The VTN-1 model has two fixed heat exchangers for bivalent systems. The lower exchanger connects to low-temperature sources (solar collectors, heat pumps), while the upper connects to high-temperature sources (gas, electric boilers) for to finish heating of water to the required temperature. The VTN-2 model features a built-in lower heat exchanger for monovalent DHW systems. The VTN-2 PLUS has a larger heat exchanger for efficient use with low-temperature heat sources like condensing gas boilers, heat pumps or solar collectors. The VTN-3 model serves as a storage tank for hot or cold water and is ideal for "turbo-boiler" systems, utilizing layered heat accumulation from top to bottom.

GLASSLINED HOT WATER STORAGE / HEATER TANK WITH ONE COIL. PRODUCED UP TO 5000 LTRS CAPACITY

GLASS LINED WATER HEATER TANK WITH TWO COILS