System repairs - Import export

The only fiberglass repair kit on the market that contains everything you need to get your work done! Made for you From professionals for professionals! Fiberglass is a very appreciative material for shipbuilding. And another great advantage is that almost any damage to fiberglass boats can be repaired.

solidian Connector Conn Fix protects fibers of solidian Connector Open End from cracking and damaging during installation. It covers the sharp edge of the wall, in the hole in which the solidian Connector Open End is installed. Also, it holds fibers in the center of the hole.

solidian Connector Conn Fix protects fibers of solidian Connector Open End from cracking and damaging during installation. It covers the sharp edge of the wall, in the hole in which the solidian Connector Open End is installed. Also, it holds fibers in the center of the hole.

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties The very high elastic modulus for small deflections in building elements

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties The very high elastic modulus for small deflections in building elements

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties

IFA Technology accompanies you throughout the entire process chain - from project planning and engineering to production and commissioning. Our worldwide IFA aftersales service offers you: Remote maintenance of your machines and systems Fast repair service and spare part service Personal contact persons for plant engineering and electrical engineering Individual support for retrofitting and upgrading projects of existing plants or systems

SIMPLE BUT POWERFUL -XtremepowerUS 1/4 HP 3 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use (Include R-134A automotive air conditioning dispensing valve design with hand operated punch/valve control, connects all R-134a refrigerant cans with 1/4" Male threads)HEAVY DUTY VACUUM PUMP - Die-cast Aluminum Alloy Casing enaDles the vacuum pump oe light and durable at the same time. Equipped with Brass fitting tethered safety caps to prevent oil leaks during transportation and handling.HVAC GAUGE READING - The XtremepowerUS HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R12, R22, R134a and R410aEASY OIL CHANGE - The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned Deneath the oil reservoir to quickly drain when reeded. Checking the spillage meter will help to ensure the proper level of oil.

Exclusive Gates and Tanals The only power transmission belt with mechanical assembly The mechanical fastening system ERO Joint® - developed by Tanals - provide various possibilities to assemble belts on-site without having to disassemble pulleys or axes and to release the transmission. ERO Joint® and ERO joint® Ultimate are developed for and with Gates by Tanals. They offer unique solutions system for easy and fast repair of power transmission. The cutting shapes of the junction fingers have been engineered for maximum tensile strength and fatigue resistance of the Poly Chain® GT Carbon™ material. The power of Gates combined with the creativity of Tanals. Poly Chain® GT Carbon™ outstanding mechanical performance combined to patented innovative solution ERO Joint® Ultimate offer the only transmission belt with mechanical assembly whose performances equal those of all other endless belts on the market. A sustainable solution able to replace any rubber belt.

Exclusive Gates and Tanals The only power transmission belt with mechanical assembly The mechanical fastening system ERO Joint® - developed by Tanals - provide various possibilities to assemble belts on-site without having to disassemble pulleys or axes and to release the transmission. ERO Joint® and ERO joint® Ultimate are developed for and with Gates by Tanals. They offer unique solutions system for easy and fast repair of power transmission. The cutting shapes of the junction fingers have been engineered for maximum tensile strength and fatigue resistance of the Poly Chain® GT Carbon™ material. The power of Gates combined with the know-how of Tanals. Poly Chain® GT Carbon™ outstanding mechanical performance combined to ERO Joint® provide the only existing transmission belt with mechanical assembly. The only existing transmission belt with mechanical assembly, a unique solution on the market. Suitable for all HTD installations.

Discover the easy handling of our Pressure Transmitter and Reader of the PT-RF series. The PT-RF series of pressure transmitters are an alternative solution for universal pressure measurements for fluid technology applications, which will provide benefits for system operators, maintenance personnel and repair technicians as well as for original equipment manufacturers. The advantages resulting from the use of the new technology for system operators, maintenance personnel and repair technicians are clear: Measurements can be carried very easily, without extensive training and within a few seconds at the press of a button and then documented in a reliable process. Unscrewing and re-installing pressure gauges or other measuring and display devices – practically a temporary opening of the system – is not required. Potential hazards for people, machines and the environment, for example from emitted residual oil in the test hose or leaks at the measuring point, as well as ingress of...

Fragranced micellar emollient: while it degreases from road dirt and insects, its provides the car with water-repellent protection. Its “micellar” technology enriched with polymers: Delicately removes traffic film dirt and grease without damaging aluminium and rubber. The product creates a thick and full-bodied lather suited to foam systems. Repair and self-drying effect. Has an amazing water-repellent effect when rinsing, thus reducing drying time of the car and facilitating the following phases. Makes the car much shinier and smoothens out the micro scratches on the surface. Minimises residues on the bodywork caused by hard water, thus reducing the onset on droplets. Has balanced foam properties so that it does not block the purification systems. No added NTA/EDTA/PHOSPHORUS/SODIUM HYDROXIDE*. It contains surfactants of plant origin.

Suitable also for welding precision mechanical parts and medical technology components as well as for the manufacture of sensors and electrical components The ALS 100 is an ergonomic workplace The spacious work chamber offers a very brightly lit work area and is loaded via two side doors. The average power of 100 W enables a fast pulse sequence (up to 25 Hz) and thus fast work even at high energy settings. The homogeneous fusion of the materials results in welding results of the highest quality. The laser is used in the manufacture and repair of jewelry, in precision engineering or when welding sensors

Maintain the high accuracy of your BlowerDoor measuring technology by regularly submitting it to a calibration. Benefit from the high accuracy of the BlowerDoor measuring technology: At ± 4% or rather ± 5% (flow rings D + E), the accuracy of the BlowerDoor testing flow rings – as well as that of the pressure gauge DG-700 (± 1%) or DG-1000 (± 0.9 %) – clearly exceed the minimum legal requirements. The manufacturer’s calibration as well as the calibration with DAkkS-certificate, are subject to the highest quality standards. When calibrated, all measuring systems undergo a preceding functional test. If required, we will gladly provide you with a replacement device at favorable rates and conditions, while your BlowerDoor measuring system is being calibrated or repaired.

Split pipes made of PE-HD with snap-on system For the subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems - Sealed against fine sand - Reusable - No sleeve required - Extendable to any length - The joining of the split pipes does not require any tools - A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) Use as a repair split pipe: Our 120 mm x 5,0 mm split pipe is constructed in a way that the locking mechanism is on the outside of the pipe, which means that the inner diameter of 110mm is fully usable without dimensional limitations. Therefore, the split pipe can be clamped over the defective cable conduit like a plaster over a wound. You don’t need to saw off the damaged pipe section! Standard design: Material: PE-HD Locking system: snap-on locking Colour: black Length: 3 m

Split pipes made of PVC-U with H-profile For subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems. - Sealed against fine sand - Reusable - No sleeve required - Extendable to any length - The joining of the split pipes does noch require any tools - A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) The joining is achieved by connecting the two split pipes. The connection battens (H-profile) are glued on one side. A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required). In addition, the H-profiles can be joined to the split pipes during the final assembly using Tangit plastic glue for PVC-U. Standard design: Material: PVC-U Locking system: H-profile Colour: black Length: 3 m

Split pipes made of PVC-U with snap-on locking For the subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems. - sealed against fine sand - reusable - extandable to any length - the joining of the split pipes does not require any tools - a continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) Use as a repair split pipe: Our split pipe is constructed in a way that the locking mechanism is on the outside of the pipe, which means that the inner diameter of 100 mm is fully usable without dimensional limitations. Therefore, the split pipe can be clamped over the defective cable conduit like a plaster over a wound. Standard design: Material: PVC-U Locking system: snap-on lock Colour: grey Length: 3 m Possible designs: Length: 1 m to 3 m Colour: special colours are available on request Labelling: acc. to customer specifications

Customer service and system maintenance – fast and future- oriented. Our goal is to create low- maintenance systems that guarantee maximum precision and maximum work capacities. Of course we also adapt our systems to satisfy our customers’ individual needs and to meet special requirements. We develop solutions to perfectly integrate our soldering systems into any given production process. At any time, STRECKFUSS SYSTEMS provides customers with spare parts, wearing parts, and alteration parts. We are a service team of experienced electrical engineers, mechanical engineers and system manufacturers. Beside the firm maintenance dates, our team is always available for short- notice duties. STRECKFUSS SYSTEMS guarantees an excellent customer service and takes on the responsibility for all system maintenance work with regard to both the new STRECKFUSS soldering systems and older models. Our customer service – an overview: commissioning briefing user training system inspection system maintenance system repair works on- call service system modification waste management

Dipomed skin chap repair systems are the first local skin chap repair system used in profesional salons with the device and products are developed. Dipomed Crack Repair application is to provide cellular activation by damaging the chapped area.It is used in applications for weight gain or postpartum and birth crack repair.1 set cabin and 25 sets or 45 sets of diy products are included. It is portable and ergonomic.

Competent, reliable and efficient. As experienced grab systems specialists, we professionally repair and restore all makes of grabs. We always have the main spare parts for KROGER rope and motor grabs in stock in our warehouse, whether you require them for a revision, quick on-site damage repair, repairs caused by wear-and-tear or refurbishment. We either make quick repairs on site or take your machinery to our workshop for more comprehensive refurbishments. Contact us, we will be happy to advise you.

Due to its unique composition, the CoPrA liquid patch guarantees a secure sealing of the puncture channel on the inside of the tire. The CoPrA liquid patch should only be used in combination with the remaining components of the CoPrA tire repair system and also only according to our instructions for use. In this way, a safe and StVZO-compliant repair of the tire can be guaranteed.

The CoPrA vulcanizing solution is an integral part of the CoPrA Tire Repair System. It helps prevent carcass rusting and transforms existing rust into solid inert material. In combination with the remaining components of the CoPrA Tire Repair System and when used correctly according to our instructions for use, it guarantees a StVZO-compliant tire repair.

For a professional tire repair: CoPrA (Corrosion Protect Activ- active rust protection component) re-supply pack car/motorcycle/RunFlat for all tubeless tires up to 270 km/h. With this ECE R-approved tire repair system you can repair tread damage up to 6 mm on passenger car, motorcycle & RunFlat tires. Due to its unique composition, CoPrA Tire Repair System prevents carcass corrosion and stops rusting that already exists before tire repair by converting the rust into solid inert material. Our CoPrA Tire Repair System is StVZO compliant and should always be used together with all related components and according to our instructions for use.

For a professional tire repair: CoPrA (Corrosion Protect Activ- active rust protection component) tire repair kit car/motorcycle/RunFlat for all tubeless tires up to 270 km/h. With this ECE R-approved tire repair system you can repair tread damage up to 6 mm on passenger car, motorcycle & RunFlat tires. Due to its unique composition, CoPrA Tire Repair System prevents carcass corrosion and stops rusting that already exists before tire repair by converting the rust into solid inert material. Our CoPrA Tire Repair System is StVZO compliant and should always be used in conjunction with all associated components and in accordance with our instructions for use. This CoPrA tire repair kit contains in addition to the repair body: 35g CoPrA liquid patch, vulcanizing solution, awl (short), tool handle, grub screw, pricker, Allen key, knife blade.

For a professional tire repair: CoPrA (Corrosion Protect Activ- active rust protection component) tire repair kit truck for all tubeless truck tires. With this ECE R-approved tire repair system you can repair tread damage up to 6 mm on truck tires. Due to its unique composition, CoPrA Tire Repair System prevents carcass corrosion and stops rusting that already exists before tire repair by converting the rust into solid inert material. Our CoPrA Tire Repair System is StVZO compliant and should always be used in conjunction with all associated components and in accordance with our instructions for use. This CoPrA tire repair kit contains in addition to the repair body: 35g CoPrA liquid patch, vulcanizing solution, awl (short), tool handle, grub screw, pricker, Allen key, knife blade.