System maintenance - Import export

Our e-maintenance system is registered to meet the needs of users. The e-maintenance system, which has been refreshed, renewed and perhaps redefined as a result of users' desire for better, can be seen as a natural result of creativity and complying with the requirements of the age with the new methods it uses, wanting to access information in the most accurate and fastest way. It is used only by sharing educational materials on the internet, via e-mails or platforms. It will be possible to draw them into the education and make them a part of it with the auditory and interactive way of expression. We will be able to better convey and guide our customers about our targeted product features, maintenance and repairs in case of malfunctions, with simple games created in the videos.

Fine bubble aeration system for lagoons & large surface area ponds. HDPE Floating Feed pipe sized to provide the required air flow Air supply pipe to difusers Aquatube 70 type Tubular Diffusers Stainless Steel Diffuser Feed Section Concrete ballast to stabilise the diffuser assembly Cost-effective solution Low maintenance Specific modular system Adaptable to any lagoon or large pond Low maintenance requirements Very reliable system easy to install and operate Very competitive design and scope of supply Significant mixing of the total volume within the lagoon The active biomass is aerated effectively and efficiently.

The main task of helical oil separators is to separate the high volume of oil coming from the discharge of compressor and return it in the most effective and efficient way. It is to increase the efficiency of the system by minimizing the excess oil rate that may occur. Helical oil separators are also suitable for multiple systems. Using the flator system to ensure high performance by closing the oil return line when there is not enough oil volume in the oil seperator. By having the flange type connection model, it can be cleaned during the system maintenance. Using special materials (stainless steel and brass), flawless and long life-span design. PROPERTIES: It has a working pressure of 45, Flator system providing high performance, Compatibilty with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants

ESSOSFF Series Oil Seperators are designed to seperate the mixture of the oil and refrigerant which caused by the compressors’ discharge. By the return of the discharged oil to the compressor, the life-span of the compressor and system is extended. Using the flator system to ensure high performance by closing the oil return line when there is not enough oil volume in the oil seperator. By having the flange type connection model, it can be cleaned during the system maintenance. Using special materials (stainless steel and brass), flawless and long life-span design. ESSOSFF Series Oil Seperators are designed with Solder type connections as a standart. The oil return connection is SAE 1/4″. PROPERTIES: Having special design, long life-span without any problems, Flator system providing high performance, Compatibilty with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants

Precision handling for heavy loads From end-of-line, through rack handling, to automated storage: Lödige has complete control of all the materials handling processes required in the press shop — including tool handling and systems for improved tool maintenance. Your advantages using Lödige solutions in the press shop: Ergonomic tool maintenance Coil handling up to 40 t Safe provision of pressed components Lifting and tilting tables up to 40 t Connection to pressed component storage Linked materials handling systems

Versatile multi-axis system designed for feeding machine stations. The Y axis can be realized with a rack and pinion driving system for multiple independent carriages or with a short belt system for connected Z axes. The motion systems can be designed with recirculating ball guides or with bearings depending on loads, dynamics, and different environments. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

Versatile transfer system for metal sheet handling, designed as the main element in a series of presses which eventually combine with load/unload systems. The system features high positioning precision with heavy duty cycles and high dynamics, and is also available for very extended lengths. It manages cantilever loads to keep one side of the series free for operations. The system is driven by a belt with Ω transmission. The Z axes can be placed at different distances, according to the loads. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

The ECO SYSTEM units are linear actuators made of a self-sustaining extruded aluminum frame and are driven by a polyurethane belt with AT metric profile steel inserts. Three different sizes available: 60mm, 80mm, 100mm Version available with recirculating ball bearing or roller rails Reduced weight ensured by the light frame and the aluminum sliders High sliding speed The ECO SYSTEM series actuators are offered with two motion systems: ECO SYSTEM – SP Featuring a maintenance free recirculating linear guide rail fitted inside the profile. ECO SYSTEM – CI Featuring four rollers with a Gothic arch outer profile sliding on hardened steel bars placed inside the profile. Main fields of application for Eco System linear units: Automation Packaging Industrial machinery

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv DryLin® N - Technical data DryLin® linear guide systems in the cleanroom DryLin® N - Applications DryLin® N - Design rules System selection & service life calculation NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. DryLin® N - Low profile linear guide system NK-02-17 DryLin® N - Low profile linear guide system NK-22-17-40 drylin® N - Low profile linear guide system NK-22-17-30 NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor DryLin® N low profile guide systems offer you low profiles in various widths. Like in all drylin® products, the carriage runs without lubrication in anodized aluminum profiles. The material used and the unique design make DryLin® N a cost-efficient and flexible guide system. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Rail made of anodized aluminum 2 Gliding elements made of iglidur® J or J200 3 Carriage made of chromated zinc or plastic 4 Carriage with threaded hole or through hole Advantages: Small installation height between 6 and 12 mm Lightweight Numerous carriage options – also with pretension Maintenance-free, self lubricating Corrossion-resistant Low wear with low coefficient of friction Rails in silver or black anodized When not to use ? When precision below 50 μ is required In high loads over 50 kg drylin® T drylin® R drylin® W When high resistance to chemicals is required drylin® W drylin® R DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv Standard, preload and floating bearing NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. 1. NW-01-27 standard 01 with through hole g 2. NW-02-27 standard 02 with threaded hole 3. Preload with through-hole or threaded hole 4. uinjection-molded with through-hole or threaded hole 5. NW-21-27-60P Vollkunststoffschlitten mit Durchgangsbohrung 6. NW-22-27-60P solid polymer carriage with through hole 7. NW-11-27-80 double carriage with through hole NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 1. Standard 02 with threaded hole 2. Injection-molded with threaded hole 3. Standard 01 with through hole NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P 1. Standard 02 with mounting nuts 2. Injection-molded with mounting nuts NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor

If you do not need your battery system at the moment, we would be delighted to take over the logistics and maintenance for you. Our services in detail: Receiving inspection and reconditioning of your battery Storage in accordance with the currently valid regulations Regular checks and charging processes If the battery is not retrieved after an extended storage period, the capacity is redetermined and the results are presented for a decision to be made.

So that everything runs smoothly

SPECIAL CONVEYING SYSTEMS CONVEYING OF PACKED AND BULK PRODUCTS IN THE PRODUCTION PROCESS WITH “METAL FREE AREA” FOR THE INTEGRATION OF METAL DETECTOR Budget sparing individualized solutions. Guaranteed long-term, trouble-free metal detection results. Continuous operation, reliable and with low maintenance. Systems available for nearly any application, from mill feeding over bag checking to the Transport of textile fibres.

The grid | power V X battery is characterized by its special design as completely cast positive plates with lamellar structure. The use of high-purity grid lead with a high electrode thickness as well as a low acid density results in an expected design life of up to 25 years. It is particularly suitable for high-current discharges of short duration and thus predestined for use in power plants and switchgear. The product design according to DIN 40738 ensures the highest compatibility when replacing and expanding existing plants and battery systems. In combination with the HOPPECKE grid | AquaGen recombination system, maintenance costs can be reduced, and even maintenance-free operation can be achieved.

The AWALIFT 6/2 is designed for up to 9,300 residents, and is able to provide drainage for small towns. The proven separator system is also used in this size, and the systems are installed dry. System operation and maintenance are very user-friendly. The pump controls are designed according to the user's needs and mounted in an external cabinet. Additional accessories are available for this system, please submit your inquiry. Draining towns with up to about 9300 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 200

The Sirius MK6 Labeller is an accurate and reliable system manufactured for high-speed label applications. With a maximum production speed of 300 products per minute, the Sirius MK6 increases your production line’s speed and efficiency. Built with a heavy-duty conveyor and stainless-steel base frame, this label application machine is made to last. It’s innovative “no tool” adjustment process allows the user to effortlessly perform product changeovers. The operating system is cost effective, allowing for easy use, setup, and maintenance. It also includes video tutorials on maintenance, changeovers, and system alarms. This system is not only easy to use, but also can keep up with the industry’s advanced machine capability requirements. The Sirius MK6 is a Pharmaceutical Grade Labeller.

Valve Technology Force range max. 180 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.

Valve Technology Force range max. 100 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.

Valve Technology Force range max. 100 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.

BORSIG offers comprehensive services for the power engineering, chemical and petrochemical industries as well as oil, gas and water supply. From our facilities Berlin, Gladbeck and Hamburg our exellently networked global team of engineers and technicians provide you with competent, fast and reliable support. We have decades of experience in planning, performing and implementing all kinds of assembly, manufacturing and service tasks. We rectify malfunctions and procure any required spare parts. We support you in the planning, delivery and installation of new components in your systems, modification, inspection and maintenance of existing components provided by us or third parties, and we also offer troubleshooting within the framework of a 24-hour standby service. Our services comprise: - Pressure vessels: Field service and repairs - Engineering - Boiler service - Piping - Workshop facilities for new production and overhaul of vessels

WATER SEPARATOR WA 4I MULTIQUBEWater separator WA 4i for combination with MultiQube insulation layer dryers The new WA 4i is provided with an integrated micro filter system with low-maintenance magnetic lock filter compartment to take in micro filter cartridges with a threefold filter element. This makes the WA 4i a versatile integral solution with all pre-HEPA filter stages in only one device. Advantage: improved flow-optimized filter technology, quicker setup, decreased material and space requirements – no separate additional micro filter housings required. With respect to insulation drying of surfaces sized up to 40 m², no other model is quite fit to hold a candle to this separator, for despite its ultra-compact dimensions the WA 4i comes fully equipped with numerous practice-oriented detailed solutions, such as a construction yet easier to maintain, TTKwic quick couplings, cable holder, residual water drainage and much more.

The portable Extrima Leak Detector is the ultimate intrinsically safe instrument for leak detection in the toughest environments, including hazardous locations such as Zone 0 (corresponding to Division 1). The Extrima allows you to quickly find leaks on a wide range of industrial applications such as aircraft and hydrogen cooled generators. With the Extrima the aviation industry has a safe, accurate and yet simple solution for leak testing of complete fuel systems, both in production and maintenance situations. Thanks to its high sensitivity, the Extrima can detect even minute leaks with pinpoint accuracy. Extensive tests have shown that using the Extrima can reduce the average time by more than 50 % for identifying, locating and repairing a leak on a fighter jet during maintenance. Click here to see how easy it is to find leaks on aircraft fuel system using the Extrima (video 3:55, YouTube). It is certified for use in Zone 0, classification Ex ia, IIC T3 with ATEX, IECEx,...

NSPV solar AC combiner box An kind of electrical enclosure that securely unites multiple wires and cables through various ports of entry. A solar combiner box combines the output of numerous strings of PV modules for connection to the inverter which improves the reliability and facilitate the installation and maintenance of the system.

Typically, the ASCO CO2 Gas Dosing System is used together with water desalination plants. The system is equipped with a CO2 pressure reducing valve, filtration unit, CO2 gas flowmeter, CO2 regulating valve, pressure gauges, safety valves and a completely prewired control cabinet. In case of maintenance the system provides a manual bypass line, which also can be monitored by the flowmeter. Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required

The trak | uplift impulse battery system offers decisive advantages over conventional lead-acid drive batteries. The high-current capability of the virtually emission-free AGM monobloc batteries ensures long runtimes in dynamic applications and short-term high loads. The integrated onboard charger provides even greater flexibility and availability. This is because the system can be temporarily charged at any standard socket. In conjunction with a HOPPECKE charger, up to 16% energy costs can be saved. Thanks to AMG technology, the system is completely maintenance-free, so there is no need to refill water over the entire service life. trak | uplift impulse is the perfect companion for truck-mounted forklifts and electric pallet trucks.

The ViscoDuo-VM 2-component dispenser is a valveless dosing system for static mixing based on the proven progressive cavity technology and thanks to its purely volumetric precise dosing principle, is ideally suited for high-precision dosing tasks. Built according to modular structure, a configuration of the 2-component dosing systems as well as maintenance and part exchange at module level is possible. The material components are mixed downstream of the mixing head only in the mixing tube to prevent material hardening in the system components of the mixing head. Your advantages: - repeatable dosing volume even with viscosity and density fluctuations - Processing of low to high viscosity materials with low to very high filler content - Dispenser and mixing head segments can be combined in size due to modularity - standard equipment with dead space-free integrated dosing pressure sensors for online process monitoring - simple assembly/disassembly of the components