Results for
HFP BANDSTAHL GMBH & CO KG
Germany
In coil coating, an organic coating is applied to the surface of a metal strip in a continuous process. The HUEHOCO portfolio includes both decorative and weather-resistant coatings as well as system solutions for a firm bonding of the metal strip with various rubber compounds and/or various plastics. For technical applications, there are also high-temperature resistant and non-stick as well as anti-friction systems, directly rubber- or plastic-coated metal strips. Since 1989 we have been the first company in the world to offer our customers the opportunity to have their goods delivered "endlessly" wound with more than 200,000 metres in a single strip on metal or plastic spools. Depending on our customers' requirements, we can process all wrought aluminium alloys, stainless steels, steel grades and non-ferrous metals available on the market in various degrees of hardness.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
Functional and decorative coating systems In addition to coatings for Coil Coating applications and related areas, SI-Coatings GmbH develops and produces individual paints and varnishes for any application. These are technical, functional and decorative coatings.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
Rubber-to-metal bonding Our adhesive build-up provides strong bonding between our metal carrier and your rubber. With our know-how, we are able to bond a wide variety of compounds such as NBR, CR, EPDM, SBR etc. for you. Plastic-to-metal bonding Whether PC (polycarbonate), PVC (polyvinyl chloride), ABS (acrylonitrile-butadiene-styrene), CAB (cellulose acetobutryate), PP (polypropylene), TPU (thermoplastic polyurethane), PA (polyamide) and polyolefinic plastics or other thermoplastics as well as duroplastics - we ensure that you achieve optimum adhesion between the plastic and our metal carrier.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
We are able to produce various shades of high-quality decorative polyester top coats in small and very small batches using a paste system – resulting in a very competitive pricing for our customers.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
This coating system is mainly used for the coating of cold rolled strip, but can also be applied to other metals. It is applied in the last processing step and enables a special gliding ability and heat resistance on coated surfaces.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
An innovation for decorative applications is the stripe coating on our narrow Coil Coating line at First American. This is a complete coil coating process in which we are able to leave tightly toleranced, unpainted stripes on the carrier strip. These give the decorative effect to the finished article, while the coated areas are coated with an adhesive system (e.g. automotive trim material or white coating with a defined black stripe, etc.). As always, all metal strips available on the market can be used as metal carriers; all coatings can also be used. This leads to a smart product, allowing you a multitude of new, innovative applications.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
Our rubber-coated metal strips are used in numerous applications, such as engine and aggregate seals. In addition to NBR, we also coat metal strip with EPDM, NR, HNBR and FPM in thicknesses of 10 μm - 2 mm. The metal strips can also be coated with an anti-friction coating, which offers extremely high resistance to heat and special sliding ability. The resulting further processing quality enables them to be used wherever parts made of metal strip with sealing, sound-absorbing or vibration-damping properties are required. The very good bonding between elastomer and metal, combined with outstanding deep-drawing properties, shows the superiority of this coating. The metal strips can also be top-coated with decorative lacquers on both the metal and the rubber coated side (e.g. as a distinguishing feature in the company's own production for top and bottom sides).
Request for a quoteMVA D.O.O.
Slovenia
We provide surface preparation and finishing of casted aluminium parts and other metal parts, such as: shot blasting, sand blasting, deburring (trowal), polishing, anodization, galvanic coatings, powder coating and cataphoresis.
Request for a quoteINOTECH MACHINING SRL
Romania
We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.
Request for a quoteINOTECH MACHINING SRL
Romania
We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.
Request for a quoteINOTECH MACHINING SRL
Romania
We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.
Request for a quoteINOTECH MACHINING SRL
Romania
We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.
Request for a quoteINOTECH MACHINING SRL
Romania
We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
PVD Coating Turned Parts by Ming Xiao Mfg Enhance your projects with our exceptional PVD Coating Turned Parts, meticulously crafted by Ming Xiao Manufacturing in China. What is PVD Coating? PVD, or Physical Vapor Deposition, is a cutting-edge coating technique that transforms ordinary turned parts into extraordinary components. It involves the deposition of thin, durable coatings to enhance surface properties. Suitable Materials for PVD Coating Our PVD Coating Turned Parts are compatible with a wide range of materials, including stainless steel, brass, and aluminum. Ming Xiao Mfg ensures unparalleled quality in every coating application. Colors That Captivate Experience a spectrum of possibilities with our PVD coatings, available in a variety of colors. From classic metallic finishes to vibrant hues, customize your turned parts to match your vision.
Request for a quotePLANSEE SE
Austria
Plansee collimators are made of tungsten heavy metal alloys (Densimet® alloys). Due to the high density of the material, collimators perfectly shield from x-rays and gamma rays and therefore protect the healthy tissue during radiotherapy. Densimet® tungsten alloys are distinguished by their particularly high density. Combined with their ability to absorb radiation as well as their outstanding mechanical properties and machinability. Particular material properties: — high density of 17.0 to 18.8g/cm³ — better machinability compared to pure tungsten — high Young’s modulus and very good mechanical properties — high absorption capacity for X-rays and gamma rays — harmless to the health and environment
Request for a quotePLANSEE SE
Austria
Shielding components made from tungsten, molybdenum and the tungsten heavy alloy Densimet® only allow radiation to pass where it is actually needed. During the generation of X-ray radiation our materials guarantee that environmental radiation exposure is kept to an absolute minimum. Plansee produces flat shielding components using an innovative, near net shape process. The result: The foils and sheets have a particularly isotrope and homogeneous microstructure free from any characteristic orientation. Possible products and applications are: — Shielding components for X-ray tubes — Shutter blades for computer tomographs — Shielding elements for detectors — Isotope containers for brachytherapy — Shielding elements for linear accelerators — Shieldings for oil and gas drilling
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PLANSEE SE
Austria
For the high-resolution devices used in general X-ray applications, mammography, angiography and computed tomography, Plansee develops and manufactures extremely robust X-ray anodes and components for X-ray tubes. The product range includes anodes made from molybdenum alloys such as TZM and MHC with focal tracks consisting of various tungsten-rhenium alloys. Plansee manufactures molybdenum-vanadium and molybdenum-niobium targets that are specially designed for use in mammography applications and which can be optionally equipped with precious metal focal tracks. The product range also comprises material combinations including copper and precious metals and brazed graphite elements on the metallic disc. As braze materials V/Ta/Zr composites, titanium, zirconium and other materials are used. Plansee supplies anodes as ready-to-use assemblies including the rotor, heat shield and shaft.
Request for a quotePLANSEE SE
Austria
Sheets made of molybdenum and the molydenum alloys TZM, MLR and MLS are available in the thickness range from 0,127mm to 40mm in different sizes in the Plansee Online Shop. Order fast and easily in the producer's onlineshop: www.plansee.com/shop. Special dimensions are available on request.
Request for a quotePLANSEE SE
Austria
Sheets made of tungsten and tungsten alloys are available in the thickness range from 0,05mm to 5mm in different sizes in the Plansee Online Shop. Order fast and easily in the producer's onlineshop: www.plansee.com/shop. Special dimensions are available on request.
Request for a quotePLANSEE SE
Austria
Evaporation coils are available in many different lenghts, diameters, coil lenghts and coil pitches. These resistance heaters with their very high melting points will bring practically any metal to the boil. At the same time, their high corrosion resistance and outstanding material purity prevent any contamination of the substrate. The range includes evaporation coils made of the following materials: — Grain stabilized tungsten (WVM) for the evaporation of aluminum — Tantalum — Molybdenum — Molybdenum-lanthenum (ML) for particularly long service lives
Request for a quotePLANSEE SE
Austria
Molybdenum and tungsten crucibles from Plansee are the perfect vessels for melting and solidifying the single crystal. The formed crucibles have particularly thin walls combined with excellent creep resistance. The outstanding purity of the crucibles prevents any contamination of the single crystal. Even the most aggressive sapphire melts cannot do any harm. Plansee produces large numbers of formed molybdenum and tungsten crucibles and supplies them in all commonly used dimensions. They are successfully used by all the major manufacturers and numerous end customers worldwide.
Request for a quotePLANSEE SE
Austria
Plansee produces material for wear-resistant coatings, adhesive layers, decorative or DLC coatings. Offering compositions tailored for advanced hard coatings with optimized mechanical and tribological properties. Further topics that might be addressed are: enhancing of thermal and chemical stability, adding of functional properties like self-lubrication, self-hardening and self-healing. To adjust the coating characteristics to the dedicated application, Plansee offers its scientific expertise in alloying of targets and cathodes with elements that influence the coating properties as follows: Grain size and morphology, Hardness adaption, High temperature oxidation resistance, Friction coefficient, Thermal stability, Thermal conductivity, Electrical conductivity, Antibacterial properties, Color effects. Offered sputtering targets and arcing cathodes: Titanium-Aluminum Aluminum-Chromium Chromium Titanium-silicon Titanium Zirconium Tungsten carbide Titanium-diboride
Request for a quoteOR.P. STAMPI SRL
Italy
Gas Nitriding – Surface treatment Quench Hardening / Tempering – Heat cooling process treatment.
Request for a quoteLEICA MICROSYSTEMS
Germany
The EM ACE600 sputter coater is a versatile high vacuum film deposition instrument for your FE-SEM and TEM applications. Whether you need to •enhance contrast by a fine-grained metal layer, •produce nanometer thin but robust carbon films, •rotary shadow your sample to make smallest features visible, or to •move into cryo-coating, the ACE600 coater will offer the optimal solution to see more, and this every time.
Request for a quoteWALTHER TROWAL GMBH&CO.KG
Germany
Mass coating of small parts using the hot drum process Coating with the Rotamat is the economical solution for the surface finishing of mass-produced small parts made of elastomers, metal or wood - for example, O-rings, handles, springs or screws. Even geometrically complicated or particularly sensitive parts leave the machine perfectly coated and dry. The coating process is fully automatic, so that the time-consuming insertion or suspension of the parts on racks - which is necessary with conventional automatic coating machines - is no longer necessary. The Rotamat is suitable for a wide variety of coating agents. Typical applications are: — Decorative coating — Bonded coating — Adhesive coating — Anti-corrosion coating — Insulation coating
Request for a quotePOLIBRAS S.A.
Portugal
Various Materials and Grains Widths: 3mm to 1600mm Lenghts: from 260mm
Request for a quoteENDUSTRI GM
Turkey
Sandblasting Facilities, it allows you to improve your sandblating works and save on sandblast media costs. Sandblasting Facilities may be costly, it is therefore important to understand all the factors to consider when making an assessment to determine what makes sense for your sandblasting needs.
Request for a quoteBLASQEM, LDA.
Portugal
Natural garnet sand is a non-active mineral abrasive which does not cause silicosis. It has high performance, ensuring efficiency and economical process with medium oxidation level. Its grains are microcrystalline, with more or less irregular rounded shapes. Hardness: 6-7.5 mohs Shape: irregular Density: 3.5-4.3 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive
Request for a quoteResults for
Surface treatment - steels and metals - Import exportNumber of results
60 ProductsCountries
Company type
Category