Strong magnets - Import export

Various of magnets are customized Both magnet with countersunk and the whole magnetic pot assemblies are available. 1.Grade range: N35-N52, N33M-N50M, N35H-N48H, N35SH-N45SH, N28UH-N40UH, N28EH-N40EH, N28AH-N33AH 2.General shapes and size,please look at the table. Max size is 230mm,max length of the magnetization is about 60mm for special customized. 3.Coating/plating:NiCuNi,Ni,blue-white Zn or colorful Zn,Ni-Ag,Ni-Au,Ni-Sn,black epoxy or grey epoxy 4.Magnetization direction: a.Axially magnetized for disc and cylinder; b.Thickness magnetized for block and arc and other shapes; c.Diametrally magnetized for ring,cylinder;segment; d.Radial magnetized for ring magnet,the thickness of ring is within 7mm; e.Customized specific requiremets magnetized,such as Multipole magnetized.

This product is made of environmentally friendly PU fabric with a built-in strong magnet, which can easily attach to the back of the iPhone with MagSafe function and install it in place. You can also attach it to various MagSafe protective cases to showcase your unique style and store up to 4 credit cards with confidence. The card holder has a two in one function, allowing for one second switching between horizontal and vertical screens, making it easy to hold and more labor-saving and stable to hold.

This product is made of environmentally friendly PU fabric with a built-in strong magnet, which can easily attach to the back of the iPhone with MagSafe function and install it in place. You can also attach it to various MagSafe protective cases to showcase your unique style and store up to 2 credit cards with confidence. The card holder has a 2 in 1 function, allowing for one second switching between horizontal and vertical screens, making it easy to hold and more labor-saving and stable to hold.

Magnetic system with stainless steel body and strong neodymium magnet core. This series have a deeper magnetic force than the classic flat pot systems. Two milled surfaces on the perimeter allow to fix the system with a tool. The holding surface is over molded with a hard type of rubber (TPE) and protects the magnet from strikes. At the same time the rubber effects a noise absorption.

Extra strong, magnetic document sleeve for metal surfaces. With protective flap to prevent documents from getting dusty or damp. • Magnetic document sleeve with strong adhesive force through two heat-sealed neodymium strong magnets • Use on metallic surfaces, such as meshed containers, pipes and moveable transport containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Protective flap protects inserts against dust and moisture • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502

DRILLSTAR fishing magnet is a valuable tool before diamond coring or drilling. Its strong magnetic field will retrieve all types of small steel objects from the bottom of the hole. It is available is a variety of sizes and shapes, to suit the most demanding fishing jobs. Two main designs are available : - Classic design, with a single magnet. - Modular design, using multiple small, high-strength magnets: this design enables a wide range of lifting forces and magnetic surface shapes, using the most powerful magnets available today. Mud ports can be added on the tool bottom or side to clean out the fish. Our magnets are available in two grades, depending on temperature rating : - Normal, up to 300 deg F (150 deg C). - High Temp, up to 570 deg F (300 deg C). Unlike traditional fishing magnets, DRILLSTAR Magnets are permanent and do not require any periodic re-magnetization. High-temp magnets are designed to lose very little force with temperature increase (3% per 100 deg C)

FX-WP lifting magnets are waterproof to 1.5m diving depth. The multi-sealed, super-strong permanent magnet system sits in a fully nickel-plated magnet body. It is a diver. FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio.

The rubber coated pot magnet is made of small neodymium disc magnets, steel plate, and rubber. These disc magnets are embedded in the steel plate, and then the whole steel plate is coated with rubber. The steel plate well concentrate and enlarge the magnetism of these magnet discs. The rubber which covers the magnets and steel plate protects the magnet from corrosion and also well protect the delicate objects that contact pot magnet from scratch. For the Black Rubber coated pot magnet,Also could be classified as threeRubber Covered Neodymium Pot Magnet with External Threaded Stem,Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is protruded, and Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is no protruded.It consists of iron plus strong Neodymium magnet and Black Rubber.

Magnet fishing is not magnetic fishing toys what you might think. Magnet fishing is about finding ferromagnetic objects in outdoor water using strong magnet which similar to metal detecting where objects can be found on land using the metal detector. In recent years, magnet fishing has become increasing popular in the United Kingdom and United States, and magnet fishing is not only as a wonderful hobby, but also help cleaning different bodies of water, such as rivers, lakes and streams.

Magnetic Pin is made of 1 piece strong Neodymium disc (disk) magnet and 1 plastic mold or metal. They are small, easy to grip yet very powerful. We have 8 colors pin, they are beautiful and widely used in office, map, teaching etc. Color and size of magnetic pin can be made by customers' requirement.

Strong Neodymium Rectangular Pot Magnets with Countersunk Hole Magnets The neodymium pot magnet holder magnet is made of a super strong neodymium magnet encased inside a chrome plated steel cup. The neodymium magnet is bonded inside of the cup with adhesives. At the same time, the steel cup also protects the magnet from being damaged when frequently used. The counter sunk hole on the magnet is provided for easy applications.

Fits any style cabinet door Strong magnetic force Plastic parts surface to avoid corrosion Prevents the cabinet or cupboard doors from hitting the wall while opening Easy installation Fasteners could be provided

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

Neodymium magnets can be used in wireless charging as a way to hold the receiving device in place on the base station while charging. The magnet creates a strong pull that attracts and holds the receiving device in place, ensuring that it remains in the correct position for optimal charging efficiency. Neodymium magnets is not strong enough to affect the wireless charging process itself. ShapeCustom Processing ServiceCutting, Punching, Moulding GradeN35-N52 MaterialNdFeB Product NameMagsafe Wireless Charging Magnet CoatingNiCuNi Max Operating Temp(80ºC- 20ºC) Magnet thickness0.6mm UsageInstall Magnet inside case and support magsafe wireless charging.

The LIFTPLAQ® is an handling tool allowing the handling of street manhole covers and plugs, designed for professionals of dry and wet networks. This system, allowing street manhole covers to be moved without touching them and thus reducing the hardship by three. The LIFTPLAQ® consists of a mechanical assembly. It is fitted with a powerful magnetic device allowing a firm prehension and manipulation of the covers. Numerous advantages... liftplaqliftplaq Ergonomics : straight back and legs bent Security : no hand/cover contact Versatility : usable on all types of covers and plugs Mobility : easy to move Handling : reduces exertions by three Storing : little space required Grants from French occupational health and safety organiszations The basic kit consist The body of the tool The shaft with two handles and pointed chisel A brass anti-deflagration wheel balancer An articulated arm with strong magnet and curbed pin An handle for unlocking the magnet

Niobium-titanium is the most frequently employed alloy for superconductors. It is also used in medical diagnostics, for example in Magnetic Resonance Imaging tomography. With MRI, cross-sectional images of the body can be made which often permit outstanding clinical assessment of the organs and many pathological organ changes. MRI employs magnetic fields, not x-rays. Magnets of niobium-titanium generate extremely strong magnetic fields when cooled to temperatures near absolute zero. They act as superconductors; current flows without resistance.

Tesla next generation superconducting magnets for silicon crystal growth. Superconducting Crystal Growth Magnets are used in the semi-conductor industry to improve the quality of monocrystalline silicon (mono-Si). Mono-Si is the basic material used in the production of integrated circuits. The application of a strong magnetic field during the growth of the larger diameter cylindrical ingots or boules of mono-Si reduces the incorporation of contaminants, thereby improving the quality of the resulting silicon crystal. Tesla Engineering has developed and supplies a portfolio of next generation superconducting Crystal Grower Magnets for the growth of monocrystalline silicon using the Czochralski method (MCZ). - Magnets for crystal growing diameters of 200 - 450 mm - CUSP or TRANSVERSE with field strengths up to 4000 Gauss - Cryogen Free - <1 day downtime for cold head service - All magnets supplied with control unit to interface with customer pullers ** Click for more **

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.

Insert magnets for mounting and assembly from RATEC have been used for years in the precast concrete industry. They have proven themselves in tough everyday conditions. And through the combination of rubber bodies with integrated magnets, they can be produced in almost any geometry. Simple solutions make efficient work possible. The strong, integrated magnet fixes the insert part in the exact position.