Strainer - Import export

Advantages Simple, compact design Area of application For the filtration of all types of liquids; protection filter for pumps and volume meters, pipeline filter, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S8 Filter aid - Filtration degree 10 µm - 5 mm Medium Oil, water Filter material Sieve Disk

Advantages Simple, compact design Area of application Various filter sizes and the modular design enable any required flow rate. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number S9 Filter aid - Filtration degree 10 µm - 5 mm Medium Oil, water Filter material Perforated Plate Cylinder

We produce filter elements in a virtually unlimited variety: plain or pleated, cylindrical or conical. They are used for the filtration of gaseous and liquid media.

We produce basket filters and wire basket inserts of any kind according to customer specifications. Normally perforated plates with round or square perforation as well as wedge wire elements serve as base bodies. The filter baskets are lined inside or covered outside with plain or with pleated wire cloth, according to customer requirement.

PROTECTION OF HYDRAULIC NETWORKS Cast iron strainer MAIN FEATURES Ductile iron body Nominal pressure 16Bars ISO PN10 and PN16 drilled flanges up to DN 150, from DN 200, PN 10 or PN16 drilling to be specified

Y Strainer (Filter) Brass From DN15 to DN100 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Vertical Type / Filter : Stainless Steel AISI304 / Max. Working Temp. : 80 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

THIS IS ALSO ONE OF THE BEST SELLER. IT HAS GOOD LOOKING SHAPE. INDISPENSIBLE HELPER OF HOUSEWIVES. THERE ARE A LOT OF SIMILARS OF THIS PRODUCT IN THE MARKET, BUT NOONES OF THEM LIKE THIS. USERS LOVED IT VERY MUCH AND WE ARE SURE THAT EVERYBODY IN THE KITCHEN WILL LOVE IT.

Body- Cover : GG-25 Cast Iron (EN GJL 250) / Filter : Stainless Steel / Gasket : PTFE-NBR-EPDM / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 16 Bar *** Applications Area :Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids / Saturrated Steam

Application To avoid measurement errors and damage by foreign objects carried in the medium. Reliability Complete emptiying of conical design and drain plug at the lowest point of the filter (filters in cast). Special features Low pressure drop due to large filter surface area (up to 16 times the pipe crosss-section) Flexibility • DN15 to DN400 • -200 °C to +300 °C • to 3.000 m³/h • to PN100 • different materials

• ideal for use with tea or spices, fine-meshed • with spring clap mechanism for easy filling

Strainer for protecting downstream plant components against contamination. All parts in contact with the media are made from stainless steel, therefore it is also suitable for aggressive media.

Bamboo thermos with a deep tea strainer The reusable bamboo thermos is a great alternative for bottled water, tea or coffee. It prevents the pollution caused by plastic bottles and disposable cups. Include a breath of nature in your life and show off your eco choice. The interior of the highest quality stainless steel combined with the outer layer of bamboo has an insulated double wall that can keep your coffee or tea hot for several hours! Also suitable for cold drinks. It is easily portable and fits into most car cup holders. Simply put it in a bag, purse or backpack. If you are a tea lover, you will probably be pleased with a small useful bonus in the form of a strainer for loose tea. Thanks to it, you can pour tea directly into a thermos mug. Features: - a thermos with a screw cap with a seal - wide neck for inserting ice cubes - unique ecological design - deep strainer for loose tea and coffee - Material: stainless steel, bamboo. - Distributor: Eco Status. Volume: 450-500 ml.

Bamboo thermos with a shallow tea strainer The reusable bamboo thermos is a great alternative for bottled water, tea or coffee. It prevents the pollution caused by plastic bottles and disposable cups. Include a breath of nature in your life and show off your eco choice. The interior of the highest quality stainless steel combined with the outer layer of bamboo has an insulated double wall that can keep your coffee or tea hot for several hours! Also suitable for cold drinks. It is easily portable and fits into most car cup holders. Simply put it in a bag, purse or backpack. If you are a tea lover, you will probably be pleased with a small useful bonus in the form of a strainer for loose tea. Thanks to it, you can pour tea directly into a thermos mug. Features: - a thermos with a screw cap with a seal - wide neck for inserting ice cubes - unique ecological design - shallow strainer for loose tea and coffee - Material: stainless steel, bamboo.

Designed as in-tank suction strainer elements for direct installation into suction lines of pumps; should always be installed below the minimum fluid level of the reservoir Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Materials ▪ Threaded end cap made of glass-fibre reinforced Polyamide (PA) or Aluminium ▪ Lower end cap and support tube made of Steel, zinc-plated ▪ Standard filter material is Stainless Steel Mesh (125 μm); alternative micron ratings of 60 μm and 250 μm on request Consult STAUFF for alternative materials. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Integrated bypass valve with an opening pressure of 0,2 bar (3 PSI) to reduce the risks of high-pressure drops that can be caused by contaminated strainer elements or high-viscosity fluids Special sizes, designs, materials and...

• with wide stainless steel brim • the long handle and the well-worked out wire loop make sure that the sieve sits well on pots and bowls

EMA fabricated custom tee strainers can be provided in several different orientations allowing for horizontal or vertical installations. EMA fabricated tee strainers can be furnished with single or double wedge basket designs to meet open area requirements for all your straining needs. EMA fabricated tee strainers are available with numerous types of cover options. From bolted, slip-hinged, knob, swing-away, quick opening, or davit swing arm assembly allowing for ease in maintenance. Quick opening and davit swing arm assembly covers allow for a single maintenance engineer to manage the cleaning of the unit reducing maintenance cost and downtime. Fabricated tee strainers can be fitted with special tapings for vents, drains, or differential pressure gauges in flanged, threaded, socket weld, or butt-weld connections. EMA fabricated tee strainers can be constructed in a wide variety of materials: Carbon Steel, 304/304L Stainless Steel, 316/316L Stainless Steel, Alloy 20, Hastelloy

EMA basket strainers are being used where the line can be shut down for short periods to clean or change the baskets. EMA standard fabricated pipeline strainers meet customers’ expectations and the highest standards. EMA pipeline basket strainers are being used in piping applications where a greater screen area to pipe area ratio is required. By providing a greater screen area than a Y-strainer, you are optimizing the total open area and minimizing potential pressure loss through the basket. EMA strainers are used to protect pipelines, valves, and spray nozzles from water flow problems. They reduce the necessity for frequent cleaning and provides a cost and time saving benefit with less downtime.

• shapely and handy • for modern kitchens

CHARACTERISTICS For clamp mounting into the pipeline Efficient protection of dirt-sensitive system components during commissioning Low differential pressure Easy installation and replacement Material Certificates DIN EN 10204/3.1 for Clamp Collar OPTIONS For DIN and ASME flange connections Design for low temperature down to -50 ° C Design pressure up to 100 bar Stainless steel construction Reverse flow direction GENERAL The starting screen VAS is used for commissioning and starting a system in order to clean gas from coarse soiling such as welding bead, scale, grease, etc. After starting, the starting screen can be removed from the pipeline. The design is carried out as a welding design. FUNCTION The starting screen VAS consists of a supporting basket made of perforated sheet metal with a welded clamping ring. These are galvanized after assembly. On the outside of the support basket a stainless steel wire mesh is welded.

Technical data Deisgn Y-strainer, body FBE-coated. Face to face EN 558-1 Row 1 Connection Flange DN25 … DN200, PN16 drilled, Flanges DN65 – PN16 will be delivered in 4-hole execution! Mounting position In horizontal pipes with below hanging top cover, observe to the flow direction! Pressure Range PN16 Temperature Range 0°C … +80°C Mesh Normal filter: Ø1,0mm, DN25 … DN65 Ø1,2mm, DN80 … DN200 Fine filter: Ø0,25mm Material Body: GGG-50, FBE-coated Cap: GGG-50, FBE-coated Filter: Stainless steel 1.4301 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

optimum is a strainer filter. The housing is manufactured in stainless steel and available in 3 different constructive shapes Y, L and O to adapt to various installation types. The filtering element is a mesh screen. It is the optimal solution to be implemented as a protection filter in closed-circuit plants and more in general in process water applications with a moderately low quantity of suspended solids.