Steel- chrome - Import export

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

Chrome products are made from Chrome 304 Stainless Steel and are designed to dress up the vehicle, add protection, and give it an elegant look. Each item has a great fit & finish. Two tape strips of 3M strong permanent double-sided super self-adhesive sticky tape, are used for super-strong stickiness.

Ø22 or Ø27 Complete set for reefer including hinges. Galvanized or Stainless Steel

DISC DIAMETER is 660/520/420 mm. CHEWING WIDTH .228 mm TOTAL WIDTH .290 mm PALLETLING AREA .4727cm2 DISC WITH CONICAL RINK AND BOLT INTERNAL SPEED .6,9 m/secROLL DIAMETER .320 mm.ROLL WIDTH .232 mm DOUBLE ROLLER .BELT PULLEY TRANSMISSION and TWIN MOTOR 15* 15 TOTAL 30 PIECES V BELT DRIVEN MAIN MOTOR 2 PIECES 110 KV 1000 rpm .PELLET CELL 304 QUALITY STAINLESS STEEL PELLETIZING CELL SAFETY SWITCH .FIXED MAGNET .1 PIECE CHROME STEEL XT 86,day WITH DRILLING METHOD DRILLED VACUUM HARDENED AND TURNED-ISO 9002 QUALITY CERTIFIED PELLET PRESS DISC 1 SET COMPLETE ROLL.

Stapler built entirely of chromed steel, shot without backlash, suitable for fixing of textiles, paper, plastic and other lightweight materials on the hardwood. Charging from below. This model is compatible with staples series 13 with lenght of 4-6-8 mm, total width of 10,65 mm, section 0,50x0,75 mm.

Material: - seat shell: beech plywood (10 mm) - frame: tubular steel chrome-plated, Ø 20 x 1,8 mm, incl. fixed connectors

The base material is ceramic staple fibres. Necessary for spinning the ceramic fibre is a carrier. The carrier material decomposes at 200 °C. When the material is heated up for the first time smoke development and a flaming up is noticeable. The core made from chromesteel wire Provides strength when the carrier material has decomposed. When used under stress, the carrier material determinesthe temperature limit. Available dimensions: 3 - 30 mm.

Steel 1.1213. Stainless steel 1.4034. Stainless steel 1.4112. Version Steel, ground. Steel, ground and hardchromed, chrome coating 5 10 µm. Stainless steel, ground. The precision steel shafts are generally inductively surface hardened. Note The surface value obtained during the inductive hardening process guarantees high surface wear resistance. Suitable for shaft supports 21565. On request Lengths up to a max. 4000 mm. Accessory Shaft supports 21565. Drawing reference 1) chamfered

We process the following materials: ■ chrome-nickel steel ■ various types of steel ■ non-ferrous metals ■ various aluminium alloys steel processing, stainless steel, machine engineering, tool engineering, metal processing, sheet steel processing, material 16 Mo3, Hardox, 1.4301, 1.4571, 1.4404, S355, S235, metal products, steel products, supplier construction machinery, power station, energy station, offshore equipment, pipes, steel halls, metal construction, profiles, handrails, balconies, stairs, roofing, pallet warehouse, pallet inverters, scrap conveyors, transport racks, special frames, devices, die blocks, barrel press, fork shoes, fork extensions, industrial gates, fences, customized constructions, industrial service, furnaces, playgrounds, sports fields, cladding, casing, housing, covers, noise-protection cabins, machine frames, large milled parts, conveyor technology, conveyor line, plunge pools, tank barrels and much more

foot plate Ø40, Ø50, Ø60mm made of steel with chrome plated surface lower surface made of PA black

Material: - seat shell: beech plywood (10 mm) - upholstery: foam padding with fabric cover or artificial leather cover - frame: tubular steel chrome-plated, Ø 20 x 1,8 mm, incl. fixed connectors Selection options: - upholstery color

Material: - seat shell: beech plywood (10 mm) - upholstery: foam padding with fabric cover or artificial leather cover - frame: tubular steel chrome-plated, Ø 20 x 1,8 mm, incl. fixed connectors Selection options: - upholstery color

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

For your specific requirements we customize the filter cartridge housings made of stainless steel, brass or chromed exactly Filtertechnik Jäger offers you custom-made multi cartridge housings made of polypropylene.

For your specific requirements we customize the filter cartridge housings made of stainless steel, brass or chromed exactly Filtertechnik Jäger offers you custom-made single cartridge housings made of polypropylene.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

Table top. Hot or cold combined in one plate. Temperature variable from – 5 °C to +110 °C. With Self-Cooling-System (refrigerant R600a). Casing chrome nickel steel 18/10, glass facing.

Kettle made of resistant stainless steel (chrome-nickel 18/8), durable. It does not change color, does not deform. It impresses with its shine and elegance, and is energy-saving - steel conducts heat quickly and heats the water. Presentation Thanks to its charming curves, this kettle looks really elegant. It has an equally elegant, heat-resistant handle that folds down for easy filling and safe lifting of the kettle, making it perfect for style-conscious tea lovers. Time to soothe your mind and spirit by preparing coffee or tea in the morning: Convenient pouring spout Temperature Gauge Easy to keep clean Unique design - "Zepter 304" stainless steel is an elegant combination of classic and modern It looks perfect in any kitchen The silicone handle is made of high-quality plastic, it does not heat up Ergonomic and balanced handle ensures easy carrying and pouring The whistle with a handle makes it easy to put on and take off and a signal informs that the water is boiling

Sprocket steel. Ball bearing chrome steel. Screw and nut steel. Version Sprocket teeth hardened to HRC 50, electro zincplated. Ball bearing with sealing discs 2ZC3. Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The sprocket set can be combined with all tensioning elements to form a readytoinstall chain clamp. The ball bearings are sealed both sides, permanently lubricated and maintenancefree. The sprocket can be moved on the screw and thus adapted to the chain track. With the duplex and triplex version, precision spacer sleeves ensure correct chain guidance. Rigid mounting without a tensioning element is also possible. Can also be used as an idler sprocket.

GN 1/1 - GN 3/1. Surface chrome nickel steel. Ready to plug-in. Refrigerant: 600a. Adjustable from -5° to +15°C.

Hot or cold combiplate, GN 1/1 - GN 3/1. For flush built-in, facing made of chrome nickel steel. Digitally adjustable from - 5°C to + 140°C. Ready to plug-in. Refrigerant R600a.

Design: Carving station made of chrome nickel steel 18/10. Digital adjustable from 30 – 100 °C. Carving surface with retaining lip. Incl. heat resis tant carving board made of glass. Available with cough protection on guest side upon request.

Universal-jet steamer and warming device. Design: Chrome nickel steel 18/10, thermostatically adjustable from 30 – 110 °C, clock, heating with overheat protection.

Material: - seat and backrest: foam padding with fabric cover or artificial leather cover - frame: tubular steel, polyester powder-coated or chrome-plated Selection options: - upholstery color - frame color