Steel hinge - Import export

Steel, pins and connecting elements 1.4016 stainless steel. Stainless steel, all components 1.4404 stainless steel. Version: Electro zinc-plated. Bright. Assembly: - For recessed or surface mounting. - Can be mounted on right or left side. - For horizontal or vertical applications. Drawing reference: 1) recessed mounting 2) surface mounting

Polished stainless steel hinge with ø 4 riveted pin mm 60 x 1,5 x 80. Countersunk holes ø mm 5,5. Wrapped 25 pieces in each boxes.

Polished stainless steel hinge with ø 6 riveted pin mm 100 x 2 x 100. Countersunk holes ø mm 6,5. Wrapped 25 pieces in each boxes.

Polished stainless steel hinge with ø 6 riveted pin mm 95 x 2 x 60. Countersunk holes ø mm 6. Wrapped 25 pieces in each boxes.

Stainless steel continuous hinge by the meter

Certified for the warm-temperate category, this system offers exceptio+C14nal thermal insulation thanks to its special foams on the frame and sash. With a transmittance value Uw from just 0.66 W/m²K, it is an ideal solution for buildings with low energy consumption. Possibilities Security hardware Concealed hinges» Glazing Max. 65 mm Min. 25 mm Opening possibilities Inward opening Side hung Tilt & turn Tilt & parallel Tilt only Sightlines Frame 80 mm Sash 88 mm Profile thickness 1.6 mm Polyamide strip length 45 mm » Maximum sash dimensions Width (L) 1,00 mm Height (H) 2,600 mm » Maximum sash weight 160 kg » Aesthetic possibilities Sash: Straight / Bead: Straight or curve Consult maximum weight and dimensions according to typologies. » Finishes Possibility of dual colour systems Colour powder coating (RAL, mottled and rough) Wood effect powder coating Anti-bacterial powder coating Anodised

Sectional Doors are designed for multi-purpose ceiling opening for industrial buildings. It is made of steel material. It is an ideal system with motor and manual use for all industrial structures such as factories and warehouses. Panels of 615 or 495 mm form the door. They are connected to each other with panel colored electrostatic painted steel, aluminum or stainless steel hinges. Panels with a thickness of 42 mm and a thermal coefficient of 0.78 W/m2K are composed of two steel, aluminum or stainless steel plates filled with polyurethane foam with a density of 40 kg/m3. Sectional doors There are strong steel plates inside the panel that increase the wind resistance. Thanks to EPDM gaskets, high insulation is provided on the sides, bottom and top, against rain and wind. The doors, which are balanced with the spring system, can be easily opened and closed manually without the need for a motor. The doors have a security system against spring breakage and rope throwing.

Multi-purpose ceiling opening pallet doors are made of steel material. Parking entrances, Garage Entrances and Service entrances etc. It is an ideal system for motorized and manual use. The 510 mm panels that make up the door are connected to each other with Galvanized steel, panel color electrostatic painted steel or stainless steel (Optional) hinges. Panels with a thickness of 40-42 mm and a thermal coefficient of 0.78 W/m2K are composed of two steel, aluminum or stainless steel plates filled with polyurethane foam of 40 kg/m3 density. There is a polyurethane filling inside the panel, which increases the wind resistance and heat insulation. Thanks to EPDM gaskets, high insulation is provided on the sides, bottom and top, against rain and wind. The doors, which are balanced with the spring system, can be easily opened and closed manually without the need for a motor. The doors have a safety system (optional) against spring breaks (Optional) and rope throws.

Stainless steel 1.4404. Version: Satin finished. Note: The hinges are made of weldable profile steel. The pin is fixed into the lower part of the hinge. The differing steel qualities of the weld and the beam onto which the hinge is welded must be at least equal to or better than: Stainless steel 1.4404

Floor socket 3303E made of stainless steel, ground, with hinged lid. Particularly suitable for low installation depths, e.g. in the exhibition area, kitchen, etc. Further equipment variants on request. The frame and the lid are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.

Side flexing and spiral belts, Pitch 50 mm (1.97 in) Belts for medium to heavy-duty food and non-food applications Design characteristics Suitable for both straight and radius conveying 57 % open area for excellent air circulation and drainage Stainless steel hinge pins for high load capacity, lateral stiffness, less belt supports and minimum belt lifting in curves No potential belt edge catch points due to safe fixing of hinge pin Components: Sprockets In different sizes with round or square sprocket bore Profiles In different heights and designs for inclines Side guards In different heights for retention of bulk products

Side flexing and spiral belts Pitch 25 mm (0.98 in) Design characteristics Suitable for both straight and radius conveying up to 45 % open area for excellent air circulation and drainage Stainless steel hinge pins for high load capacity, lateral stiffness, fewer belt supports and minimum belt lifting in curves No potential belt edge catch points due to safe fixing of hinge pins Components: Sprockets In different sizes with round or square sprocket bore Profiles In different heights and designs for inclines Side guards In different heights for retention of bulk products

The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.

The housing, the lid and the frame of the floor box 2008B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 8 installation devices. The sockets are VDE certified. Further equipment variants on request.

The housing, the lid and the frame of the floor box 2003B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 3 installation devices. The sockets are VDE certified. Further equipment variants on request.

Floor socket 3301E made of stainless steel, ground, with hinged lid. Particularly suitable for low installation depths, e.g. in the exhibition area, kitchen, etc. Further equipment variants on request. The frame and the lid are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.

Floor socket 3302E made of stainless steel, ground, with hinged lid. Particularly suitable for low installation depths, e.g. in the exhibition area, kitchen, etc. Further equipment variants on request. The frame and the lid are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.

Steel parts electro zinc-plated. Hinge pins tempered. Plastic handle oil-resistant. Note: See 05200 – 05280 for accessories.

The complete floor box 2004B is made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be fitted with various floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 4 installation devices. The sockets are VDE certified. Further equipment variants on request.

Hinge and caps fibreglass reinforced PA thermoplastic. Hinge pin stainless steel. Version: Hinge and caps black. Pin bright. Note: These hinges have a detent mechanism. This mechanism holds a door or lid open at three different angles or tightly closed. The hinges are available with or without guide tabs for aluminium profile slots. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties.

Fibreglass reinforced thermoplastic. Hinge pin stainless steel. Version: Hinge black. Pin bright. Note: All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate assembly, secure the hinge against rotation and make it harder wearing. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been determined under laboratory conditions. Each user must determine individually whether the hinge is suitable for the respective application. Different materials onto which the hinges are installed and the type of mounting, weather conditions and wear can influence the determined values.

Floor socket 3203E with connection module made of stainless steel, polished, with hinged cover. Can be used as a desk connection panel or floor box. The hinged cover also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for work surfaces, exhibition areas, etc. Further equipment variants on request. The frame and the cover are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.

The shutter mod. Marte – CLASS 4 is the reinforced version of the class 3 product. The technical solutions adopted on this particular model have allowed it to successfully pass the severe tests that the new UNI EN 2011 regulation imposes. The SHUTTER MOD. MARS – CLASS 4 is composed of: PERIMETER FRAME made of press-bent galvanized sheet metal, 20/10 thick, assembled by welding, equipped with an adjustment and anchoring system, with a 60mm cover fin and a minimum depth of 47mm. DOOR made from 50×50 finned tubular profiles of 15/10 thickness with recess for anti-noise perimeter gasket, Internally REINFORCED SLATS with added 40x8mm steel plate. 40x8mm steel PLATE welded internally overlapping the slats for further reinforcement. BUNKERLOCKS LOCK with anti-drill safety cylinder HINGE in galvanized steel diameter 22mm to screw, adjustable in height with steel ball pin; Black balloon SEAL positioned along the entire perimeter of the door, helps to minimize noise during closing.

The shutter mod. SATURNO is the classic line of armored security shutters. The SHUTTER MOD. SATURN is composed of: PERIMETER FRAME made of press-bent galvanized sheet metal, 20/10 thick, assembled by welding, equipped with an adjustment and anchoring system, with a 60mm cover fin and a minimum depth of 45mm. DOOR made from 60×40 finned tubular profiles 15/10 thick, base plinth and spacer band (only on French windows) in 20/10 thick galvanized sheet metal, 20mm diameter tear-proof bolts in galvanized steel. Horizontal oval slats in galvanized iron, thickness 12/10, blocked with a 6mm diameter passing rod anti-slip system applied inside the uprights and welded; HINGE in galvanized steel diameter 22mm to screw, adjustable in height with steel ball pin; Tilting mortise LOCK with three locking points. Rotating the handle activates the two locking tips

Handles cast aluminum EN AC-46200. Thrust washer plastic PA 66 GF 35-X fibreglass reinforced. Hinge pin stainless steel 1.4305. Studs and washer steel grade 5.8 or stainless steel 1.4305. Version: Handles fine structured powder-coated, black or red RAL 3003. Thrust washer black. Hinge pin bright. Studs and washer blue passivated steel or bright stainless steel. Note: Plastics are subject to creeping under load (retardation).

Aluminium 6060 T5. Cover plug PA 6.6. Version: Black anodised. Colourless anodised. Note: These hinges have stainless steel tension springs which enables doors and hatches to open or close automatically. Opening angle 270°. Spring torque opening: M(0°): 0.7 Nm / M(90°): 0.5 Nm / M(180°): 0.3 Nm Fastened with DIN 7991 countersunk screws.

Steel. Stainless steel 1.4305. Stainless steel A4 1.4401. Version: Steel electro zinc-plated. Stainless steel bright. Note: Block hinges with fastening nuts and extended middle section for inset doors. Mounted with nuts (M6 or M8) from inside. The hinge can be mounted left or right. The opening angle is 180°. Supplied unassembled. Fastening nuts and washers are supplied.

Outer Dimension: 940 x 480 x 540 mm Material: HDPE Galvanized Steel Shaft Cover: Hinged Cover Certificate: EN 840