Stainless steel weld nuts - Import export

1.4404 milling nut.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers. Clamp equipped with hand grip in order to simplify installation. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 316. Design with welded AISI 316 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 316. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Indication pressure class for gas: 4 bar for DN 40 up to DN 150, 3 bar for DN 175 up to DN 300 and 2 bar for DN 350. Studs protected with plastic protection caps.

Feature Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers (50 mm center to center). Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 24 bar for DN 40 up to DN 150, 16 bar for DN 175 up to DN 300 and 10 bar for DN 350. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers (50 mm center to center). Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 24 bar for DN 40 up to DN 150, 16 bar for DN 175 up to DN 300 and 10 bar for DN 350. Indication pressure class for gas: 6 bar for DN 40 up to DN 150, 4 bar for DN 175 up to DN 300 and 3 bar for DN 350. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spannerplate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Indication pressure class for gas: 4 bar for DN 40 up to DN 150, 3 bar for DN 175 up to DN 300 and 2 bar for DN 350. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 316. Design with welded AISI 316 studs and fingers. Clamp equipped with hand grip to simplify installation. Clamp is completely pickled and passivated after welding. Clamp is standard manufactured with BSP thread (other thread on request). Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Indication pressure class for gas: 4 bar for DN 40 up to DN 150, 3 bar for DN 175 up to...

Clamp made out of a pre-rolled plate of stainless steel AISI 316. Design with welded AISI 316 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of double band repair clamp is max. 36 mm (depends on diameter pipe). Clamps available in different diameters: DN 250 up to DN 800. Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request). Indication pressure class for (waste)water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650 and 3 bar from DN 700. Indication pressure class for gas:2 bar for DN 250 up to DN 450, 1, 5 bar for DN 500 up to DN 600, 1 bar for DN 650 and 0,8 bar from DN 700. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling) Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffles structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of double band repair clamp is max. 36 mm (depends on diameter pipe). Clamps available in different diameters: DN 250 up to DN 800. Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request). Indication pressure class for water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650 and 3 bar from DN 700. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs (50 mm center to center) and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of double band repair clamp is max. 36 mm (depends on diameter pipe). Clamps available in different diameters: DN 250 up to DN 800. Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request). Indication pressure class for (waste)water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650 and 3 bar from DN 700. Indication pressure class for gas:2 bar for DN 250 up to DN 450, 1, 5 bar for DN 500 up to DN 600, 1 bar for DN 650 and 0,8 bar from DN 700. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of double band repair clamp is max. 36 mm (depends on diameter pipe). Clamps available in different diameters: DN 250 up to DN 800. Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request). Indication pressure class for (waste)water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650 and 3 bar from DN 700. Indication pressure class for gas:2 bar for DN 250 up to DN 450, 1, 5 bar for DN 500 up to DN 600, 1 bar for DN 650 and 0,8 bar from DN 700. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs (50 mm center to center) and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized into rubber gasket. Diameter reach of double band repair clamp is max. 36 mm (depends on diameter pipe). Clamps available in different diameters: DN 250 up to DN 800. Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request). Indication pressure class for (waste)water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650 and 3 bar from DN 700. Indication pressure class for gas:2 bar for DN 250 up to DN 450, 1, 5 bar for DN 500 up to DN 600, 1 bar for DN 650 and 0,8 bar from DN 700. Studs protected with plastic protection caps.

: Clamp made out of a pre-rolled plate of stainless steel AISI 316. Clamp is manufactured with a hinge point in order to simplify installation. Design with welded AISI 316 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of double band repair clamp is max. 24 mm (depends on diameter pipe). Clamp available in different diameters: DN 80 up to DN 600. Clamp available in different lenghts: 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for water: 16 bar for DN 80 up to DN 150, 10 bar for DN 175 up to DN 450 and 6 bar from DN 500. Studs protected with plastic protection caps.

: Clamp made out of a pre-rolled plate of stainless steel AISI 316. Clamp is manufactured with a hinge point in order to simplify installation. Design with welded AISI 316 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of double band repair clamp is max. 24 mm (depends on diameter pipe). Clamp available in different diameters: DN 80 up to DN 600. Clamp available in different lenghts: 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 80 up to DN 150, 10 bar for DN 175 up to DN 450 and 6 bar from DN 500. Indication pressure class for gas: 2 bar for DN 250 up to DN 450, 1,5 bar for DN 500 up to DN 600, 1 bar for DN 650 and 0.8 bar from DN 700. Studs...

: Clamp made out of a pre-rolled plate of stainless steel AISI 304. Clamp is manufactured with a hinge point in order to simplify installation. Design with welded AISI 304 studs and fingers. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of double band repair clamp is max. 24 mm (depends on diameter pipe). Clamp available in different diameters: DN 80 up to DN 600. Clamp available in different lenghts: 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 80 up to DN 150, 10 bar for DN 175 up to DN 450 and 6 bar from DN 500. Studs protected with plastic protection caps.

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers. Clamp equipped with hand grip in order to simplify installation. Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of EPDM rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 16 bar for DN 40 up to DN 150, 10 bar for DN 175 up to DN 300 and 6 bar for DN 350. Studs protected with plastic protection caps.

Feel free to contact us! We will make an individual quote for stainless steel welding: sheets, pipes, orifices, tees, stainless elbows, balustrades and much more. We will determine the possibilities and deadline for a one-off or serial order on the basis of: documentation, type and degree of complexity of the elements to be machined, expectations as to the result, detailed guidelines. Our main goal is to provide services of the highest quality and tailored to the individual needs of the client. Our experience and professionalism put us in a leading position in the stainless steel processing industry in Poland and abroad! Welding stainless steel comprehensively and professionally We also weld stainless steel to alloyed (black) steel.

INOTECH MACHINING supplies also stainless steel welded parts and assemblies. Our team of qualified welders can weld large components and also highly complex small parts. Welding methods: - MIG-MAG and TIG (WIG). Capabilities: - We own a workshop hall of 6.000 sqm. - With cranes capacity of up to 50 tones. - Stress relieving treatment - Thermal or Vibrations. We ensure all of our products meet the highest standards through rigorous quality checks: - Penetrating liquids, magnetic powders, or ultrasonic tests, if needed. - Geometrical control in place with laser tracking.

INOTECH MACHINING supplies also stainless steel welded parts and assemblies. Our team of qualified welders can weld large components and also highly complex small parts. Welding methods: - MIG-MAG and TIG (WIG). Capabilities: - We own a workshop hall of 6.000 sqm. - With cranes capacity of up to 50 tones. - Stress relieving treatment - Thermal or Vibrations. We ensure all of our products meet the highest standards through rigorous quality checks: - Penetrating liquids, magnetic powders, or ultrasonic tests, if needed. - Geometrical control in place with laser tracking.

INOTECH MACHINING supplies also stainless steel welded parts and assemblies. Our team of qualified welders can weld large components and also highly complex small parts. Welding methods: - MIG-MAG and TIG (WIG). Capabilities: - We own a workshop hall of 6.000 sqm. - With cranes capacity of up to 50 tones. - Stress relieving treatment - Thermal or Vibrations. We ensure all of our products meet the highest standards through rigorous quality checks: - Penetrating liquids, magnetic powders, or ultrasonic tests, if needed. - Geometrical control in place with laser tracking.

INOTECH MACHINING supplies also stainless steel welded parts and assemblies. Our team of qualified welders can weld large components and also highly complex small parts. Welding methods: - MIG-MAG and TIG (WIG). Capabilities: - We own a workshop hall of 6.000 sqm. - With cranes capacity of up to 50 tones. Stress relieving treatment - Thermal or Vibrations. We ensure all of our products meet the highest standards through rigorous quality checks: Penetrating liquids, magnetic powders, or ultrasonic tests, if needed. Geometrical control in place with laser tracking.

We take a broad view of tooling rustless steel, including welding corrosion resistant steel. We complete orders for welding acid-resistant steel with the MIG, MAG, TIG methods on time and at the highest quality.We use professional devices by KEMPPI. Our team are the best professionals with proper welding licences! We cooperate with a firm dealing with supervision of welding. Thus, our customers avoid investing in expensive devices and making room for welding stainless steel. We meet 100% expectations of our customers both with the aesthetics of welds in rustless steel of various thickness, shape and use.