Stainless steel locks - Import export

The quarter turn lock can be installed pre-assembled. Housing with fastening nut and plate cylinder, same key locking, incl. 2 keys (lock type 1333). Please order required tongue version separately. Every tongue can be combined with every housing.

Ball lifting pins are quick and simple lifting devices with swing shackles. The balls are unlocked by pressing the push button. After releasing the push button, the ball is securely locked. Protected against corrosion and weather-resistant High-strength, hardened, extremely durable pin. TÜV-tested. Values X min., F1, F2 and F3 with 5x safety factor.

Quick and easy lifting device with swing shackle and safety bar against unintended release. The balls are unlocked by pressing the push button. When the push button is released the balls are securely locked. Corrosion and weather resistant. High tensile, hardened pin for extreme loads with the high wear resistance. Temperature range max. 250 °C. CE certified. Values X max, and F1 with 5x safety factor. Accessory: Receiver bushes 07784.

Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values.

Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values. Ball lock pins with high shear strength are identified by a groove marking on the pin.

Coupling stainless steel 1.4057. Screws stainless steel 1.4301. For applications that require a small construction volume and low surface pressure. The keyless locking coupling can be fully recessed in a hub connection. for shaft diameters 6 20 mm suitable for hubs with low wall thickness minimum axial offset possible selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.

Barrel locks with return spring can be easily screwed onto doors, hatches and hoods. These locks are available in two different variants: bevelled upward or bevelled downward. The bevelled surface allows the application to be closed or opened without actuating the grip. The integrated return spring always brings the grip back to its original position. Type of operation: When the grip is pushed, the barrel moves into the open position and the door can be opened. When the door is pushed to, it is locked automatically by the bevel.

NSPV Stainless steel cable ties They have an unique ball locking with Plastic jetting mechanism that allow easily and quickly installed and High tensile strength; Non-flammability. Stainless steel cable ties are a quick effective way of securing cables.They can be used in virtually all indoor outdoor,heavy industrial and underground applications.

We use many different welding methods to produce endlessly spliced conveyor and process belts, always depending on the material and intended application. The endless splice punched finger splice stepped finger splice multilayered stepped splice conical splice The mechanical fastener Steelgrip fasteners, stainless steel Wire hooks, steel or stainless steel Polyester zip splice Self-lock fastener, stainless steel Plastic splice Nieka fastener Bonded wire hooks PVC/PU Minet fasteners

NLTR Next Axis vertical with RFID, electronic lock metal, stainless steel finish, operation by Mifare Transponder, surface mount, with pull handle, shared use, incl. strike plate 2549

NLTR Next Axis Standard RFID, electronic lock metal, stainless steel finish, operation by Mifare Transponder, surface mount, with pull handle, shared use, incl. strike plate 2549

NLSK Next Axis vertical keypad, electronic lock metal, stainless steel finish, black buttons, surface mount, with pull handle, shared use, incl. strike plate 2549

The hygienic stainless steel quarter turn lock prevents bacterial attack and fulfils the strict regulations of testing principles for foodstuff machinery and hygien. The well concieved geometric form, the mirror polished stainless steel surface and the central circumferential seal reliably prevent dirt accumulation. Water, cleaning agents etc. can drain off fully and so prevent contamination. Especially in processes where the resistance of the seal to cleaning and disinfection agents is very important, optimised control cabinets, terminal boxes and command panels are a must. Specifically designed after the principles of Hygienic DESIGN, the hygienic quarter turn lock HD fulfils the strict regulations of the foodstuff processing industry and passes therefore optimally in their professional hygienic applications. The special seal is suitable for high pressure washing up to max. 100 bar and fulfils IP65/67. Furthermore, the seal is temperature stable up to 80°C and the blue

The hygienic stainless steel quarter turn lock prevents bacterial attack and fulfils the strict regulations of testing principles for foodstuff machinery and hygien. The well concieved geometric form, the mirror polished stainless steel surface and the central circumferential seal reliably prevent dirt accumulation. Water, cleaning agents etc. can drain off fully and so prevent contamination. Especially in processes where the resistance of the seal to cleaning and disinfection agents is very important, optimised control cabinets, terminal boxes and command panels are a must. Specifically designed after the principles of Hygienic DESIGN, the hygienic quarter turn lock HD fulfils the strict regulations of the foodstuff processing industry and passes therefore optimally in their professional hygienic applications. The special seal is suitable for high pressure washing up to max. 100 bar and fulfils IP65/67. Furthermore, the seal is temperature stable up to 80°C and the blue

Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost

Inch sized UNF helicoidal thread inserts in stainless steel (helicoils) with screw lock Reinforce the thread in low shear strength materials, such as aluminum, aluminum alloys, etc. The self-locking thread insert is identical in construction and operating principle to the regular helical thread insert, but it also offers a braking action on the screw thanks to the particular polygonal configuration of one or more turns of the insert thread. In this way, the screw remains tightened with absolute reliability even in the presence of vibrations or shocks. The anti-unscrewing braking action remains even after numerous screwing and unscrewing operations The self-locking thread allows you to eliminate the use of other locking elements, such as elastic washers or similar, remaining effective even in the presence of high temperatures For installation you may use taps and tools available in this sections: Thread insert taps, Installation tools for thread inserts Made in the EU.

Inch sized UNC helicoidal thread inserts in stainless steel (helicoils) with screw lock Reinforce the thread in low shear strength materials, such as aluminum, aluminum alloys, etc. The self-locking thread insert is identical in construction and operating principle to the regular helical thread insert, but it also offers a braking action on the screw thanks to the particular polygonal configuration of one or more turns of the insert thread. In this way, the screw remains tightened with absolute reliability even in the presence of vibrations or shocks. The anti-unscrewing braking action remains even after numerous screwing and unscrewing operations The self-locking thread allows you to eliminate the use of other locking elements, such as elastic washers or similar, remaining effective even in the presence of high temperatures For installation you may use taps and tools available in this sections: Thread insert taps, Installation tools for thread inserts Made in the EU.

Metric helicoidal thread inserts in stainless steel (helicoils) with screw lock Reinforce the thread in low shear strength materials, such as aluminum, aluminum alloys, etc. The self-locking thread insert is identical in construction and operating principle to the regular helical thread insert, but it also offers a braking action on the screw thanks to the particular polygonal configuration of one or more turns of the insert thread. In this way, the screw remains tightened with absolute reliability even in the presence of vibrations or shocks. The anti-unscrewing braking action remains even after numerous screwing and unscrewing operations The self-locking thread allows you to eliminate the use of other locking elements, such as elastic washers or similar, remaining effective even in the presence of high temperatures For installation you may use taps and tools available in this sections: Thread insert taps, Installation tools for thread inserts Made in the EU.

WATER METER BOXES - NO INSULATED BOX, 500X 750MM The best model of alternative to insulated boxes for water meter and all of technical installation. 500x 750 Height 750mm Insulated Cover Black pipes: Height 700mm. The cover insulated Stainless steel ring Cover keys, locking system complete. Alternative: The cover NOT INSULATED

Opens any type of can Easy and efficient mechanical system with pressure adjustment Reversible stainless steel blade Available with clamp locking (OXV55) or with the surface bolted to the worktop (OXP55)

The access panels are easy, quick and easy to install, they are durable and reliable. Revolutionary doors are made of stainless steel, with or without a lock. A large selection of dimensions is suggested. We also manufacture access panels according to customer’s specific needs.

Modular morgue units have single, double, triple production options. It is completely made of 0,50 0,60 mm 304 quality stainless steel modular locked. Modular morgue units are available, with or without the cooling group.

Levers ▪ Straight and off-set design available ▪ Made of zinc, steel, stainless steel or aluminium Locking Devices ▪ Various designs and configurations available, depending on the actual type and size of the ball valve ▪ Universal field-installed devices avaibale Pneumatic Actuators ▪ Single- or double-acting Limit Switches

Specially small dimensioned self-centering Locking Assembly without axial displacement. As the locking srews are located out of the actual clamping area and the pressures are relatively low, the hub can be designed economically small. Specially small dimensioned self-centering Locking Assembly without axial displacement. As the locking srews are located out of the actual clamping area and the pressures are relatively low, the hub can be designed economically small. Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8

Self-centering 2-piece Locking Assem­blies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8

These flange type units is made of stainless steel and fix the hub positively against their extended flange preventing axial movement during tightening. Applied wherever self-centering action and good concentricity of mounted components are essential and hubs with straight-thru bores are used. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point, preventing bending or lifting of the inner ring during assembly and thereby ensuring easy dismantling. High rotation speed – the dimensional accuracy of the RfN 7013 Locking Assemblies allows their use in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial...

Identical in design and function to the traditional 7012 device, this unit is made of stainless steel for applications requiring rust free installation. Torque capacity is somewhat reduced due to the nature of stainless steel. Slimmest design - especially suitable for applications where space is limited. The Locking Assembly RfN 7012 stainless compensates small tolerance deviations and compensates small mounting errors. Large transmittable forces and moments – several Locking Assemblies RfN 7012 stainless can be placed one behind the other. The transmissible torque and axial forces are added - please take in this respect consulting with our technical experts. Easy installation – in comparison to crosspress fits temperature treatments and fitting are eliminated. Locking Assemblies RfN 7012 stainless steel can cover a big fitting clearance. Low risk to contamination – during the tightening process the functional surfaces of the device and connection are pressed together generating...