Results for
GUANGZHOU CHUN HSIN TUBE CO., LTD.
China
This product will stand out on the shelves in the eyes of the consumer thanks to its shiny black basse and golden belt at the waist. The double-layer cap allows more color options and gives your brand a premium edge. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for top-grade cleanser, face cream, body scrub, hand cream etc.
Request for a quoteDALMINEX GMBH
Germany
Square Saver made of ductile and stainless steel casting
Request for a quoteSC DEMOTEKS MEDIKAL SRL
Romania
The medical cap must not be missing from your outfit. Whether you choose a simple model, colorful or with nice prints, in our collection you will find a lot of medical caps, made of quality textile materials. These are a perfect accessory that completes your medical uniform, whether you have long or short hair
Request for a quoteAVM AUTOMATION
France
Pneumatic gripper with 2 or 3 concentric fingers Single acting with rear central air connection High clamping force External clamping and vertical using only Without detection Screwing gripper technology The technology of this gripper allows it to develop a very large clamping force (about 10x the force of a gripper) so as to obtain the necessary tightening torque in the following applications – screwing cosmetic or hygiene bottles, with or without spout – screwing of pots or cans with torque control – screwing of thermostatic subassemblies – screwing push buttons The central rear pneumatic supply and single acting makes it easy to mount on a rotating joint. Screwing bottles with pump spoutThe wide angle opening version is generally used for screwing vials with pump spouts. The 2finger version makes it possible to tighten square or prismatic caps, but also to reduce cycle time by let go the bottle radially by opening the gripper at the height of clamping
Request for a quoteOMS MEKANIK OTOMASYON SISTEMLERI SANAYI TICARET LIMITED SIRKETI
Turkey
Cap tightening machines are designed to be able to tighten all caps between 10 mm and 50 mm Air system motor is used in cap tightening machines. The systems work with air. 7-8 bar air pressure is needed for the system. According to the condition of the products, a holder can be added for round bottles so that the bottle does not rotate. It can be deactivated in square bottles. Cap squeezing apparatus can be changed according to the bottle cap types. It performs the lid tightening process between 1500-3000 hours depending on the product lid. Cover clamping units are controlled by plc system and 10-7-4.3 hmi screen when they are alone. It can be added to the filling system when used with the filling line. It can use the same screen with the filling system.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
Designed to be compact and portable, this product is an ideal choice for essence, eye cream, and sample products. Its black gloss varnish design conveys a low-key, sophisticated appearance. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
This product featuring a pearl white flip-top cap communicates a noble feel and is ideal for customers favoring minimalism design. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for hand creams, sun screen, various facial cleansers products, etc.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
The Metallic plating decoration of the cap goes well with the translucent tube and dispays a premium look. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for face wash, body cream, hair care etc.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
This screw cap is higher than standard screw cap and is designed with a refreshing cyan-and-white color combination, giving the product a stronger visual impact. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for Facial wash, mask, body cream, hair care etc.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
This dark green plastic tube featuring a long-tip mouth looks slim and fasionable. It is ideal for skin care, sunblock, BB cream etc. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
This screw cap tube is easy to use and convenient to carry around. It has versatile utility and is suitable for practically all markets. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for face wash, hand cream, skin care etc.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
The delicate design of the product conveys a refreshing feel and a strong sense of youth. It is ideal for wash care, hand cream, and samples products. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for cleansing, hand cream, etc.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
This 50mm flip-top cap is ideal for customers looking for large quantities. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for wash, facial cleansers, body lotion, massage cream etc.
Request for a quoteGUANGZHOU CHUN HSIN TUBE CO., LTD.
China
This white flip-top cap looks adorable and goes well with hand cream and facial cleanser products. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for cleansing, hand cream, isolation cream etc.
Request for a quoteDALMINEX GMBH
Germany
Telescopic spindle extension GW336 with standardised intersection accord. to worksheet DVGW336-1 (A), Edition September 2010. DVGW tested accord. to technical examination basis DVGW 336-2 (P). Two-piece hot-dip galvanised steel rod accord. to DIN 10240 (alternatively in stainless steel), without coupling (bottom adapter), with connection drilling, square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336-2 (P). Three-piece PE protection tube system with a bonded centring cap and bell accord. to GW336-1 (A). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.
Request for a quoteDALMINEX GMBH
Germany
Telescopic Spindle Extension T3 - Stainless steel (DIN3223 C and E) A two-piece stainless steel rod (1.4301), coupling (bottom adapter) for spindle and shaft and square cap (accord. to DIN3223 C or E) made of stainless steel AISI 304. Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques up to 1000Nm (oval type wedge gate valve with square tube size 30mm). Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and either a universal combi bell (Form C) or a universal bell (size Ø80mm or Ø100mm (Form E)). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter/sealing insert.
Request for a quoteDALMINEX GMBH
Germany
A two-piece stainless steel rod (1.4301), coupling (bottom adapter) for spindle and shaft and square cap (accord. to DIN3223 C or E) made of stainless steel AISI 304. Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques up to 1000Nm (oval type wedge gate valve with square tube size 30mm). Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and either a universal combi bell (Form C) or a universal bell (size Ø80mm or Ø100mm (Form E)). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter/sealing insert.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DALMINEX GMBH
Germany
Telescopic Spindle Extension T3 - waterproof. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329, square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150 N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and flange bell (F10). Completely dirt-proof and water-repellent.
Request for a quoteDALMINEX GMBH
Germany
Telescopic Spindle Extension T3 for ball valves with polygon. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304) with connection drillings accord. to GW336. Suitable for operating key DIN 3223 C or E (DN25-50). Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal round bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.
Request for a quoteDALMINEX GMBH
Germany
Telescopic Spindle Extension T3 for ball valves with square connection. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304) with connection drillings accord. to GW336. Suitable for operating key DIN 3223 C or E (DN25-50). Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal round bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.
Request for a quoteDALMINEX GMBH
Germany
Telescopic Spindle Extension T2 for gate valves. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques according to GW336. Two-piece PE protection tube system with a bonded centring cap, universal bell and sealing. Completely dirt-proof and waterrepellent. Optional: Marking disc (double sided gas and water) as well as bell adapters/sealing inserts.
Request for a quoteDALMINEX GMBH
Germany
Telescopic Spindle Extension T3 with position indicator. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329, square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.
Request for a quoteDALMINEX GMBH
Germany
A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) accord. to DIN 3223 E made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150n. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques according to GW336. Three-piece PE protection tube system with a bonded centring cap, universal bell and sealing. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.
Request for a quoteDALMINEX GMBH
Germany
Telescopic spindle extension GW336 with standardised intersection accord. to worksheet DVGW336-1 (A), Edition September 2010. DVGW tested accord. to technical examination basis DVGW 336-2 (P). Two-piece hot-dip galvanised steel rod accord. to DIN 10240 (alternatively in stainless steel), without coupling (bottom adapter), with connection drilling, square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336-2 (P). Three-piece PE protection tube system with a bonded centring cap and bell accord. to GW336-1 (A). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.
Request for a quoteDALMINEX GMBH
Germany
A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 500Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter
Request for a quoteDALMINEX GMBH
Germany
Telescopic spindle extension GW336 with standardised intersection accord. to worksheet DVGW336-1 (A), Edition September 2010. DVGW tested accord. to technical examination basis DVGW 336-2 (P). Two-piece hot dip galvanised steel rod accord. to DIN 10240 (alternatively in stainless steel), without coupling (bottom adapter), with connection drilling, square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336-2 (P). Three-piece PE protection tube system with a bonded centring cap and bell accord. to GW336-1 (A). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.
Request for a quoteDALMINEX GMBH
Germany
A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 140Nm. Three-piece PE protection tube system with a bonded centring cap, universal combi bell and sealing. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.
Request for a quoteDALMINEX GMBH
Germany
A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 250Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.
Request for a quoteResults for
Square caps - Import exportNumber of results
29 ProductsCountries
Company type