Results for
Turkey
DIN: 25CRMO4 / 42CRMO4 / 41CR4 / 34CRNIMO6 SAE: 4140 / 5140 / 4340 / 4130
Request for a quoteTurkey
AVAILABLE STEEL GRADES: DIN: C10 / C22 / C30 / C40 / C45 / CK45 / C50 / C60 / C70 SAE: 1010 / 1020 / 1030 / 1040 / 1045 / 1050 / 1060 / 1070
Request for a quoteTurkey
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 21/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards
Request for a quoteTurkey
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 21/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards.
Request for a quoteTurkey
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 21/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards.
Request for a quoteTurkey
Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 21/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards.
Request for a quoteFrance
Steel painted. Aluminium bright. Note: When using spherical washers use the wide series 07420 Form G.
Request for a quoteFrance
The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces.
Request for a quoteChina
Xian Huan-tai Technology and Development Corp., Ltd Specializes in manufacturing and exporting investment castings and sand casting. Our company founded in1995 Covering 30000 square meters, with the annual output capacity of 1200 tons. The company has production capabilities of tool making, investment casting with all silica sol process, machining and heat treatment. Huan-tai has become a leading metal parts manufacturer in south of China, Relying on the integrated superiority in advanced equipments and professional team. The company offers OEM service of investment castings& sand casting and other metal parts. The castings are exported to USA, Germany, France, Canada, Italy, Spain and many other countries. Customers at home and abroad are warmly welcome to hold business talks with us. APPLICATION FIELDS: Crusher equipment, Machinery parts and components, Mobile parts, Pipe couplings, Tools hardware, Kitchen hardware, Shower hardware,Lamps hardware, Marine hardware, Building hardware,
Request for a quoteGermany
Wide range of products available at short notice Our delivery program in the product group flanges (ANSI B 16.5) includes the following types: Welding Neck Flanges. Slip-on flanges Loose Flanges (Lap Joint Flanges) Blind Flanges and Socked Welding Flanges Threaded Flanges Special / drawing parts. Special competence for special materials We supply flanges in the dimensions ½ "to 24" in the pressure levels 150/300/600/900/1500/2500 lbs. Our special competence lies in the delivery of special materials. The following special materials are available: Carbon Steel A 350 LF2 Chrome-Moly Alloy A 182 F Chrome-Moly Alloy A 182 F11 Chrome-Moly Alloy A 182 F 22
Request for a quoteGermany
We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm. Pharmaceuticals and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.
Request for a quoteGermany
We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm.Pharmaceutical and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.
Request for a quoteBelgium
QUARD ® is an abrasion resistant martensitic steel. Its very high resistance to abrasion wear and impact makes it the ideal product for long service lives. Download the technical sheet or visit the specific website: QT.NLMK.COM !
Request for a quoteBelgium
These fine-grained, high-strength steel grades are characterized by their good weldability and high resistance to brittle cracking. They offer excellent cold forming properties and are often used for special applications at low temperatures (-20 °C and below).
Request for a quoteBelgium
Our high carbon steels are characterized by their greater hardness and good machinability.
Request for a quoteBelgium
NLMK Plate Europe offers high quality steel tubes for sour or mild service applications. The plates are thermomechanically rolled to improve mechanical properties. They are suitable for onshore, deepwater pipelines and fittings.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Belgium
Offshore steels are used in the world’s harshest environments, such as the North Sea and the Gulf of Mexico. They have been specifically developed to use low-level alloying additions to provide superior properties, reducing carbon and CEV content. The product is still in constant evolution.
Request for a quoteBelgium
NLMK Europe Plate is a historical supplier of plates for the shipbuilding industry. It produces them in accordance with the relevant national and international standards (Lloyd's Register, US Bureau of Shipping, Bureau Veritas, DNV GL, RINA, Russian Maritime Register, ASTM A 131, etc.).
Request for a quoteBelgium
Thanks to the diversity of its 3 rolling mills, NLMK Europe Plate offers one of the largest ranges of thicknesses of structural steels in the following sectors: earthworks, mining and quarrying, mechanical engineering, steelwork, oil and gas storage tanks, wind energy. Also available: laser cutting steels, steels with improved resistance to atmospheric corrosion and floor plates.
Request for a quoteLatvia
Marcegaglia’s wide range of steel strips (HR, P&O) is engineered to match both standard and specialty requirements of target industry sectors. Thanks to its production and logistics features, Marcegaglia Baltics can create unique synergies for customers, integrating their supply chain and industrial processes creating purchasing efficiency, cost competitiveness (price optimization) and the development of more performing grades or products while guaranteeing the supply of existing codes.
Request for a quoteChina
Standard: AISI, ASTM, GB Place of Origin: China Technique: Cold Rolled/hot rolled Surface Treatment: Polished Application: Construction, Construction and hardware Thickness: 0.25mm-25mm Width: 16-1500mm Length: Customers' Requirement Certificate: ISO9001/SGS/BV Type: Steel coil Edge: Round Surface: Black Supply Ability: 5000 Ton/Tons per Month Hardened and tempered heat treatment steel strip for construction Packaging Details: standard sea worthy package Payment Term: T/T,L/C etc. Port of shipment: Xiamen,China
Request for a quoteTurkey
420 quality stainless steel can be hardened by many heat treatments like high carbon steel. It contains at least 12% chromium (Cr) and this alloy is sufficient for corrosion resistance. It has good softness in annealed condition, but it has the ability to get 50 Rockwell hardness by heat treatment. For best corrosion resistance it must be hardened and gets it surface cleaned or polished.
Request for a quoteBelgium
Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539
Request for a quoteTurkey
Carbon steel products find applications across various industries. Construction materials, automotive parts, knives, tools, and more are manufactured from carbon steel. Our expert team crafts custom carbon steel products to meet your business needs. With our expert team and extensive product range, we offer carbon steel products tailored to your needs. Discover our symbol of strength and durability carbon steel products. Visit our Get a Quote page.
Request for a quoteTurkey
Angle iron; It is a product designed to be a right angle, taking the shape of L and allowing two iron to be joined. Angles made of plain carbon steel are generally used for manufacturing. It is used in areas such as food industry, chemical industry, kitchen industry, petrochemistry, automotive, ship industry, manufacturing industry and architectural structures.
Request for a quoteGermany
The SANHA®-Therm Industry installation system consists of tried and trusted SANHA®-Therm Industry system press fittings with a red moulded FKM (fluoro and perfluoro elastomer) sealing ring for high temperature applications and SANHA®-Therm carbon steel system pipes.
Request for a quoteResults for
Special carbon steels - Import exportNumber of results
31 ProductsCompany type