Small transport - Import export

Storage systems from Lödige provide a total integrated solution for parts and tools to be stored in an efficient and save-spacing saving way. Lödige storage systems can be fully automated to store and transport anything from small parts to very large and heavy aircraft parts and tools. We develop high-throughput storage systems in line with customer requirements to support your dispatch reliability and speed.

Can be dismantled in three parts so can be used from out of the building without a core drill, i.e. for FTTX, gas connections Pneumatically driven hammer bore head assembly is ideally suited for alternating soils. If the hammer bore head meets with resistance (larger rock inclusions, solid rock, rubble deposits or brickwork), the hammer effect is activated automatically. The complete system with hydraulic power unit and mixing unit MA09 can be placed on a small trailer for safe transportation. Can be dismantled Portable Can be applied from out of a building

Our efficient 500 kW boilers use an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint they deliver maximum heat output, with pressures up to 10 bar and temperatures up to 90ºC. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand

Our latest 250 kW boilers are extremely efficient, using an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint we’ll deliver maximum heat output, with temperatures up to 90ºC and pressures up to 10 bar. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand functionality

The latest design of ELKON innovation team, ELKON MIX MASTER-30 On-site Concrete Batching Plant, makes it possible to produce concrete wherever needed according to international standards in a very economical way even for small projects that require relatively small quantity of concrete. ELKON Mix Master-30 On-Site Concrete Batching Plant which can be ready for concrete production within 1 hour in wherever concrete is required, provides the following advantages - Quick installation without crane and quick relocation (only 1 hour) - No need for any concrete foundation - Installation on a very small space - Transportable by towing on roads - Cost effective shipping to overseas (can be fit into 1 unit 40’OT Container along with the bag cement feeding system) - No permission required for concrete production - Allowing concrete production on site, significantly reduces the concrete transportation cost - High quality and precise concrete production

Office container ten feet long and 250 cm high on the inside as normal. For small onsite workspace requirements, this transportable office is perfect. We provide a variety of options for doors and windows, including roller shutters, glazed bay windows, anti-intrusion bars, aluminum or steel doors, and aluminum or PVC windows. Sandwich panels with polyurethane or Rockwool insulation and thicknesses of 50, 60, 80, or 100 mm make up the walls. In addition, the floors and ceilings are insulated, with varying thicknesses according to the thermal performance requirements of the customer.

The Carpet Carrying Ram T185BT from KAUP can be used to transport carpet rolls with a small core diameter. The very slim and long mandrels should be about 2/3 of the roll length. This means that, for example, a mandrel length of 3,500 mm can be used to transport a 5,000 mm long carpet roll.

The mobile grain cleaner OBC-355CMA with a cyclone and a loading auger is designed for cleaning and calibrating any grain and preparing high-quality seed material. It is an innovative combination of 5 sieves installed in a drum with adjustable rotation speed and angle of inclination, an adjustable powerful aspiration system, a large number of overhead valves and augers. The mobile grain cleaner OBC-355CMA has enormous possibilities and more than 50 applications ranging from preliminary cleaning of grain to high-precision calibration of grain at once from 3 different types of plants for seeds. Mobile grain cleaning machine OBC-355CMA is easily transported by minibus, small truck or tractor on the road. This is the best solution for farms with several grain warehouses, as well as for businessmen providing grain cleaning services. Take full advantage of this mobile grain cleaner and take your business to the next level.

The DRP150 is a is a portable remote-controlled dredge that can be equipped with different models of electric pumps such as EL60, EL1204, EL110 or EL180 and allows the use of cutters. This dredge is versatile, easy to use and very safe: it can be operated through a wireless remote control. No need of operators onboard! The main functions are cleaning of industrial and mining ponds and maintenance dredging in harbors. MAIN FEATURES Small dimensions: easy to transport and to assembly, can be used also in very small basins and harbors. Highly customizable: can be equipped with GPS, cameras, position lights, jet system, and more. Thanks to its small draft this dredge can work in shallow waters.

The DRP120 is a portable remote-controlled dredge that can be equipped with different models of electric dredging pumps: EL1204, EL1204 HC or EL1204 HH. This dredge is versatile, easy to use and very safe: it can be operated through a wireless remote control. No need of operators onboard! The basic applications are cleaning of industrial and mining ponds and maintenance dredging in harbors. MAIN FEATURES Small dimensions: easy to transport and to assembly, can be used also in very small basins and harbors. Highly customizable: can be equipped with GPS, cameras, position lights, jet system, and more. Thanks to its small draft this dredge can work in shallow waters.

The DRP60 is a portable remote-controlled dredge that can be equipped with different models of electric dredging pumps: EL60 or EL60HC. This dredge is versatile, easy to use and very safe: it can be operated through a remote control. No need of operators onboard! The main applications are cleaning of industrial and mining ponds and maintenance dredging in harbors. MAIN FEATURES Small dimensions: easy to transport and to assembly, can be used also in very small basins and harbors. Highly customizable: can be equipped with GPS, cameras, position lights, jet system and more. Thanks to its small draft this dredge can work in shallow waters.

DRP18 is a portable remote-controlled dredge that can be equipped with different models of electric pumps: EL5, EL7,5, EL10, EL12,5 and EL20. This dredge is versatile, easy to use and very safe: it can be operated through a wireless remote control. No need of operators onboard! The main applications are cleaning of industrial and mining ponds and maintenance dredging in harbors. MAIN FEATURES Small dimensions: easy to transport and to assembly, can be used also in very small basins and harbors. Highly customizable: can be equipped with GPS, cameras, position lights, jet system, and more. Thanks to its small draft this dredge can work in shallow waters.

The "Tractor with Trailer" is an exciting toy that brings the joys of farming and transportation to young children's playtime. This set includes a vibrant and detailed toy tractor with an attachable trailer. The tractor itself is designed with bright colors to capture the attention of little farmers. Attached to the back of the tractor is a detachable trailer with a lifting mechanism. The trailer is spacious enough to carry various small toys, allowing children to transport their favorite miniature animals, cargo, or even little action figures on exciting imaginary journeys. The tractor's wheels are carefully crafted to provide smooth movement on various surfaces. This feature enables kids to explore different play environments and encourages imaginative scenarios. The "Tractor with Trailer" not only sparks creativity and imaginative play but also helps to learn about farm life and transportation. It fosters essential motor skills, coordination, and cognitive development in children.

Triple Fold Travel Baby Bathtub Multiple for Sale Bathtub Non-Slip Basin Portable Toddler Folding Temperature for Babies Product Name Main Material PP+TPE Suitable Age 0-36months The Main Function ① Ultra-small size, easy to transport and store. ② Intelligent temperature measurement and display. ③Lock the temperature within 27 minutes, no need to add hot water in the middle. ④Shelf design. ⑤Can place a shower. ⑥Raise the bottom support, stable and does not affect drainage. Available Colors ①White ②Green ③Blue ④Yellow ⑤Grey ⑥Brown Ready To Stock Support 2pcs order Custom requirements Support 500 pieces Key words ①Double folding ②Intelligent temperature measurement

High quality saffron bulbs Crocus Sativus bulbs size 8-9 lot with 25 bulbs Buy saffron bulbs? Thanks to us from Crocussativus you can grow this spice all by yourself. These bulbs are suitable for the production of 100% pure Saffron without additives. Moreover, they are cultivated in a sustainable way and are officially certified. The bulbs are delivered to location for small transport fee and are competitively priced. Before you know it, you can grow your own saffron yourself. Buy Crocus Sativus bulbs size 8-9 lot with 25 bulbs ✓ Purchasing advantage larger numbers ✓ Officially certified ✓ Free home delivery in NL ✓ 100% quality saffron production ✓ Delivery time: 5 working days ✓ Grown in the Netherlands View the range and order a number of bulbs of your choice. Want to know more about saffronbulbs? Read more about the operation and use of saffron here. Or contact us for more information.

A dumbwaiter is a small freight lift. It is often used for the transport of food in restaurants. However, they can be found in both commercial, public and private buildings. The Montepera Dumbwaiter is a special freight-only elevator that links upper and lower floors in a wide variety of business facilities: not just in restaurants, but also in hospitals, schools, facilities for the aged or the disabled, offices, homes, and factories.

> Click on the "WEBSITE" link for more > Established in 1928 Collett & Sons has expanded and diversified to become one of the UK's leading industry figures in the world of transport and logistics. Our years of experience coupled with our comprehensive fleet of specialist equipment allows us to expertly undertake all transport projects, no matter how big or small, heavy or light. Our Transport services can facilitate all cargoes from General Haulage and Heavy Transport to Heavy Lift, Crane Vehicles and the complete Project Management of abnormal loads utilising our fleet of over 200 articulated tractor units, crane vehicles, and SPMTs (Self Propelled Modular Transporters). Our continual investment in our fleet ensures that we have the best equipment to facilitate the transport of any cargo, from Super Wing Carriers specifically designed for the transport of wind turbine blades, through to specialist hydraulic Jacking & Skidding equipment.

New Gas Generator to check personal Gas Detectors A 100% Test in just 10 Seconds Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would be too time consuming to perform a complete calibration every day. The daily functional test with the gas generator makes sure that no instrument failure caused by abuse or wear and tear will go unnoticed. To perform a test, it is sufficient to expose the sensor to a short puff of gas and see if the instrument gives an alarm. To make this test as fast, easy and cheap as possible, no accurate gas concentration is used, but approximately twice the value of the alarm threshold. The gas generator stops gas generation after 10 seconds automatically. If the detector fails to alarm within this time interval it is not safe to be used. The amount of gas produced when activated is very small. Therefore no restrictions regarding transportation and storage of the gas generator apply.

The Gronemeyer aluminium compact system has stood the test of time for transporting small products in very tight spaces. The design allows for a mostly non-cutting and fast installation. Common hinged belt chains and drive engines are used. Here your requests can be taken into account. The drives are delivered as slip-on gears or with chain drive. The modular construction allows them to be re-used later for a new conveyor path. Supports, railing brackets, sensors, etc. can be positioned and affixed to the profile as desired with slot nuts. Technical data: —Conveyor body material: Aluminium/stainless steel —Conveyor body width: 90 mm —Chain width: 82.5 mm —Conveying speed: up to 80 m/min Optional equipment: —Moving deflecting pulleys —Product guides, design depending on product —Supports to stabilize the conveyor systems at the desired conveying height —Other accessories, such as sensors, stoppers, etc.

EXCOR VALENO Trays and Containers are made of hard plastics based on polyethylene and polypropylene and manufactured using deep-drawing or injection moulding techniques. The durability of these containers makes them the ideal choice for multiple uses, or may with narrower walls be employed as single-use packaging. The work pieces or small loads to be transported fit snugly into the containers. No additional VCI diffusers are needed since the plastic is impregnated with VCI substances. These two combined properties markedly simplify every kind of automated transport and storage process. Provided the instructions for use are followed EXCOR VALENO Trays and Containers will offer corrosion protection for up to five years.

Counting machine elmor C1: accessories and variants Conveyor bowls The parts to be counted with the elmor C1 counting machine are transported in a vibrating conveyor and are singularised by means of a sorting element. Both the conveyor bowl as well as the sorting element can be selected among different variants , depending on the properties of the product to be counted. A) Standard conveyor bowl made of anodised Aluminium with universal – sorting element FS0. FS0 is manually adjustable for all part sizes from 0.1 to 18 mm in diameter. B) Special sorting elements instead of FS0: FS1, manually adjustable, optimised for cereals, rice, paddy and products of similar shape and size FS2: manually adjustable, optimised for corn, soybeans, peas, beans and products with similar shape and size FS3: fine-drive adjustable in height and width, for very flat seeds or flat mechanical parts with the following dimensions: width: 0.5 to 10 mm, height: 0.5 – 8 mm, maximum length: 20 mm C) Special conveyor bowl with additional lateral opening for mechanically eliminating of accompanying substances, suitable for corn, cereals, soybean, paddy, etc. The height of this opening can be adjusted from 0 to 5 mm and allows unwanted accompanying substances laterally be sorted out. Not suitable for parts smaller than 1 mm in diameter. Can be used with sorting elements FS0, FS1, FS2, or FS3 combined. D) To meet the needs of various industries, the conveyor bowls can be made ​​of other materials . These bowls are for example extremely impact resistant or correspond to the rules of the FDA, etc. Such trays can be made ​​from various basic materials like Titanium, PEEK, Polyamide and others. E) The standard aluminum bowls can be treated or coated in order to satisfy specific requirements. With increased mechanical stress or when in contact with food, the surface can be hard anodized. A hard coating of nickel has a high surface hardness and is FDA approved, Polyurethane (PU) coating permits rapid transport of heavy mechanical parts and prevents noise and wear. Again, FDA approved materials can be used. F) Feeder Bowl with vertical outlet: Short cycle times are possible, as the seeds leave the bowl after a short run time. Advantageous when many different lots must be processed, often used for the fast 1000 grain weight measurement. Used for seeds which can be easily singularised like Crop, Soy, Corn, Canola etc. The seeds should have a diameter of 2 mm or more. Volume 0.8 litres, or about 2500 kernels of Corn. Dual Product Outlet The dual product outlet can increase the productivity in Preset Mode (= repetitive batch counting). Each time when a batch is counted, the outlet switches to the other side and the counter restarts automatically. The dual discharge chute is intended to be used for counting crop seeds or corn, which are filled directly into bags, but can also be used for other seeds with 1mm diameter or more. Automatic Seed Weight Sorter Each single seed of a lot is automatically placed on a scale. The Automatic Seed Weight Sorter measures the weight of each seed and compares it with one or several limits. According to the result of this comparison, the weighed seed is then transferred into two or more containers. So the parts can weighed and sorted either into good and bad parts or into several weight classes. Filling Carousel The C1 parts counter can be combined with the elmor 780 carousel filler. The carousel filler allows semi automatic, to a large extent unsupervised filling of vials, tubes, small containers as well as bags from paper, glassine or composite material. Filling adapter Adapter for small containers, bottles, laboratory tubes etc. This adapter allows dustfine and costly parts to be filled directly into containers. The C1 seed counter can be started only when a container is present.The filling adapters are manufactured individually on request. Dust Cover If specific small parts are processed, a dust cover can be of advantage. This is for example the case with pharmaceutical components, implants or with parts that need to be processed in a protective atmosphere. In this case, nitrogen or other gases or may be introduced through the dust cover. Ionizer When transporting small parts in the vibrating conveyor bowl there is a risk that the parts can become electrostatically charged. The correct separation of the charged parts becomes difficult. With an ionizer, the charged parts can be neutralised, shortly before leaving the bowl, in the region of the sorting element. The ionizer used in elmor C1 seed counter is manufactured by a specialized company, which is represented worldwide. The head of the ionizer is attached inside of a dust cover. Receipt Printer for Seed Counter elmor C1 The result of each completed count is printed automatically. The printing is done in plain text and bar code. During sample preparation or inventory counts many customers have expressed a wish to be able to print the determined number immediately. This can be done with this new accessories for the C1 counter. Faulty manual recordings are obsolete. Technical data: Paper: standard thermopaper rolls, 80mm width. Internal cutter, label length 64mm Barcode: Code 128 (International Standard ISO/IEC 15417), other codes on request Power supply: 100 – 240V, 50/60Hz The C1 seed counter must be equipped with an elmor printer interface board Feeding Conveyor elmor 610 Feeding conveyor and storage hopper for automatic refilling of the conveyor bowls of the counting machines elmor C1, C3 or CX Intermediate storage container of counted parts When a seed counter is combined with a packaging machine, it may be advantageous to add a container for synchronization therebetween. When the counting operation has finished and the packing machine is ready, a discharge flap is opened briefly, so that the content of the container is discharged into the packaging machine. Then the flap closes and the counting machine begins with a new operation. As a result, the waiting time that would be needed before a packaging machine is ready for the next lot can be greatly reduced, allowing a shorter cycle time. Depending on the task different volumes can be realized.

A set of disposable wooden cutlery 165 mm, assembled from natural and durable birch veneer appliances, without the use of glue. It does not emit harmful substances when heated, is safe for the environment, smooth surface, does not leave a foreign smell on the products. You can buy sets in large and small wholesale in a transport box of 300 pieces. Wood is biodegradable - buying disposable wooden cutlery means keeping ecology and nature clean.

Set of disposable wooden cutlery 160 mm, made of natural and durable birch veneer, without the use of glue. Does not emit harmful substances when heated, safe for the environment, smooth surface, does not leave a foreign smell on the products. You can buy sets in large and small wholesale in a transport box of 250 pieces. Wood is biodegradable - buying disposable wooden cutlery means keeping ecology and nature clean.

Set of disposable wooden cutlery 165 mm, made of natural and durable birch veneer, without the use of glue. It does not emit harmful substances when heated, is safe for the environment, smooth surface, does not leave a foreign smell on the products. You can buy sets in large and small wholesale in a transport box of 250 pieces. Wood is biodegradable - buying disposable wooden cutlery means keeping ecology and nature clean.

Highlights: • Wide range of products • Dimensions according to ISO 1275 • Versions with small rollers and transport rollers available • All ELITE chain plates 1 are manufactured using processes such as fine blanking and ball-drifting, so a particularly high Product range: • Double pitch roller chains ISO 1275 • Double pitch roller chains with straight plates ISO 1275 • Double pitch hollow pin bushed chains • Double pitch hollow pin roller chains contact ratio is guaranteed. • Solid, case hardened rollers 2 with good wear resistance • ELITE pins 3 are smooth and have an extra hard surface for increased wear resistance

Technical Specifications: 100% compatibility with all single phase devices High correction range (90V - 450VAC) 20ms voltage correction Real static structure thanks to thyristor and SMPS technology. Over current protection and voltage protection (Standard). Frequency protection (Standard) Short circuit protection (Standard). True heat control and heat protection (Standard) Required cooling thanks to smart fan (Standard) Manual By-Pass and Automatic By-Pass High efficiency and completely silent operation 1 Piece 4x20 LCD (Standard) Automatically saved in the LCD; All errors, Operating Time, Highest and lowest voltage seen, Highest current loaded, instantaneous temperature and highest temperature seen, software date and number, warranty number Quality ergonomic structure, small dimensions, easy transportation, ISO 9001-2008

It is a versatile device for transporting products to a height. It can be used to transport large, small, light or heavy products. The conveyor works very accurately at slow and high speed. Usually it is part of various technological lines and serves for the transport of small products within the line. The conveyor enables fast and efficient transport for a wide range of products. Benefits: •Low water consumption for cleaning •Affordable price •High quality and resistance •Energy savings of 30% •Solid steel construction Advantages: •Fast cleaning and maintenance •Simple installation •Adjustable belt speed •High accuracy conveyor •Low noise •Made of high quality stainless steel AISI 304 •50L hopper volume is at a given angle 38 ° •Conveyor has an adjustable height of 540-840 mm •Conveyor itself can be moved and the angle of the conveyor inclined from 20 ° to 0 °. •Belt PVC.

KEY FEATURES Small transport packaging Fast and easy installation Unique click system, so no tools or screws required for installation Available in three colours: Original wood, White wood and Grey wood Heavy duty Customizable: - Full colour print your logo or image directly on the panels - Stich or full colour print your logo or image on the cushions

KEY FEATURES Small transport packaging Fast and easy installation Unique click system, so no tools or screws required for installation Available in three colours: Original wood, White wood and Grey wood Heavy duty Customizable: - Full colour print your logo or image directly on the panels - Laser cutted plate