Results for
OKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Maintenance oil for dismantling, lubrication and care of machine elements and metal surfaces. Dismantling of all seized or sticky components or machine elements, e.g. door locks, hinges, screws, bolts, bushings, cranks, linkages, valves, slide rails, cable pulls, shafts, etc. Lubrication of fine-mechanical instruments, measuring instruments, office and computer equipment etc., even at low temperatures Advantages and benefits Highly effective due to ideal combination of mineral oil and additives with solvent Broad range of uses in the complete maintenance sector Displaces moisture, protects against corrosion Cleans, maintains and lubricates Gets under rust
Request for a quoteSPANSET SECUTEX GMBH
Germany
By means of a hinge, the edge protector SKD can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteGEBUWIN
Netherlands
The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Feeder-Bollard 300-2 is a cylindrical tube with a circumferential set-on ring in the top section as well as a hemispherical upper closure. Access to the internal circuit via a lockable door, including cable slide. – Hot-dip galvanised steel ST 37, cast aluminium top. – Powder coating in standard RAL colours or DB 703. – Standard design with adapter plate without electricity and water connections. – Incl. cable slide (operation possible with the flap closed). – Equipment to enable electricity and water connections is available on request. Overview of ABES Feeder-Bollard 300-2: – Steel tube, powder coated in RAL or DB 703 Glimmer grey. – Cast aluminium hemispherical upper closure. – Lockable door with cylinderlock. – Fixed mounting (Screwed to the floor from the inside). – Measurements (H above the ground x Ø in mm): 1340 x 245. – Measurements of the door: 845 mm x 225 mm, incl. cable slide.
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Feeder-Bollard 300-1 is a cylindrical tube with two grooves at the top and a flattened upper end. Access to the internal circuit via a lockable door, including cable slide. – Hot-dip galvanised steel ST 37, cast aluminium top. – Powder coating in standard RAL colours or DB 703. – Standard design with adapter plate without electricity and water connections. – Incl. cable slide (operation possible with the flap closed). – Equipment to enable electricity and water connections is available on request. Overview for ABES Feeder-Bollard 300-1: – Steel tube, powder coated in RAL or DB 703 Glimmer grey. – Cast aluminium top with 2 parallel grooves. – Lockable door with cylinderlock. – Fixed mounting (Screwed to the floor from the inside). – Measurements (H above the ground x Ø in mm): 1335 x 245. – Measurements of the door: 845 mm x 225 mm, incl. cable slide.
Request for a quoteTIRPAR OTOMOTIV MAKINA SAN. VE TIC. LTD. STI.
Turkey
ABS COMPACT SET WABCO EBS SET WABCO 2S/2M EBS SET WABCO 4S/2M ROTARY SLIDE VALVE TRAILER RELEASE VALVE PREV LOAD SENSING VALVE AUTOMATIC RELAY EMERGENCY LEVELLING VALVE NEW LEVELLING VALVE W/SWITCH MANUAL LIFTING PROTECTION VALVE AXLE LIFTING VALVE W/CABLE SOLENOID VALVE W / CABLE LIFTING BOX / PULLER LIFTER RELAY VALVE CHARGING VALVE 5-7 BAR AIR LINE FILTER BRAKE COUPLING YELLOW BRAKE COUPLING RED POLYAMIDE HOSES QUICK RELEASE VALVE
Request for a quoteResults for
Sliding cables - Import exportNumber of results
12 ProductsCountries
Company type