Silicone rings - Import export

• for storing, preparing, transporting and serving food • stackable • air tight • freezer safe • microwave and oven safe (without lid) • glass bowl heat resistant up to 280° C • ideal for food and meal prepping • silicone ring easy to remove for resi

Silicon Nitride (Si3N4) is 60% lighter than steel but strong enough to survive some of the most demanding applications in a variety of industries. This lightweight, the high-strength ceramic material is used as an alternative to stainless steel, super alloys, tungsten carbides, and first-generation ceramics such as Al2O3 and ZrO2. It offers excellent thermal shock resistance and high fracture toughness, compatibility with nonferrous metal melts, and improved structural reliability compared to other ceramic materials. When extreme conditions like these push equipment to its limits, Silicon Nitride (Si3N4) industrial ceramics deliver high performance where other materials fail. Typically, Heavy-duty diesel engines. Jet engine igniters. Oil wells thousands of feet underground. Applications for silicon nitride include: Foundries Electronics Oil & Gas Automotive Aerospace

Silicon nitride magnetic rings are mainly used to protect high voltage electrodes and are widely used in the photovoltaic industry.Heat shields and magnetic rings, as well as ceramic rings, are collectively referred to as electrode shields.Silicon nitride electrode protection cover mainly uses silicon nitride insulation, heat resistance and corrosion resistance.Compared with the protective cover of quartz and alumina which is still in use today, the service life of the silicon nitride electrode shield is more than 10 times, and it will not be electrically broken down during use, and will not be heated, nor will it be heated. Will be eroded away. Due to its own stability, in the use of photovoltaic reduction furnaces, the collapse rate of non-human factors is greatly reduced. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

PROGRESS SILICONES PRODUCES O-RINGS FOR ALL SECTORS OF INDUSTRY. French and international standards Custom-made O-rings from one-off items to large series. Hardness from 5 to 90 Shore A depending on the material: Silicone FPM / FKM (fluorocarbone) EPDM (ethylene-propylene-diene monomer) NBR (acrylonitrile-butadiene) HNBR (hydrated acrylonitrile butadiene caoutchouc) CR (polychloroprene) We provide materials in various grades by prior request: Contact with food:FDA, BFR Contact with water: KTW, ACS, NFS61, WRAS, W270 Pharmacopoeia: USP class VI, ISO 10993... Implantable < 29 days Aeronautics ROHS REACH Secondary services: Special packaging: blister, kraft paper, etc. Packs for O-rings Personalised labels Please contact our Sales department for further information on our O-rings.

sic ring

We manufacture and provide silicone sealing ORing solutions suitable for many applications.Our inhouse tool making division is equipped with the latest extrusion technology.The silicone seals ORings can be produced to both standard sizesshapes and custom made shape to suit customer specifications. Silicone rubber is generally nonreactive, stable, and resistant to extreme environments and temperatures from 55 °C to +300 °C while still maintaining its useful properties. Due to these properties and its ease of manufacturing and shaping, silicone rubber is used in orings, seals, and gaskets and can be found in a wide variety of products. Silcap Silikon engineers can create custom hardness’s, colors,variety of profile shapes and industry certifications available upon request. At Silcap Extrusions we pride ourselves on the quality of our extruded products, whether they are simple or complicated profile shapes.

Application: Grommet can be fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain relief capabilities. Construction: • Silicone ring slit for easy mounting over the wire. Will compress on the wire when cover is fitted.

Use: Grommet can be fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain relief capabilities. Construction: • Silicone ring, slit for easy mounting over wire. Will compress on the wire when the cover is fitted.

Application: Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diameter. Construction: • Silicone cover with retention ring prevent disconnection due to vibration. Tapered entrance hole to ensure proper sealing on most cable diameters.

Silicon Nitride (Si3N4) is 60% lighter than steel but strong enough to survive some of the most demanding applications in a variety of industries. This lightweight, high-strength ceramic material is used as an alternative to stainless steel, super alloys, tungsten carbides and first-generation ceramics such as Al2O3 and ZrO2. It offers excellent thermal shock resistance and high fracture toughness, compatibility with nonferrous metal melts, and improved structural reliability compared to other ceramic materials. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

Silicon nitride heat shields and magnetic rings are mainly used to protect high voltage electrodes and are widely used in the photovoltaic industry.Heat shields and magnetic rings, as well as ceramic rings, are collectively referred to as electrode shields.Silicon nitride electrode protection cover mainly uses silicon nitride insulation, heat resistance and corrosion resistance.Compared with the protective cover of quartz and alumina which is still in use today, the service life of the silicon nitride electrode shield is more than 10 times, and it will not be electrically broken down during use, and will not be heated, nor will it be heated. Will be eroded away. Due to its own stability, in the use of photovoltaic reduction furnaces, the collapse rate of non-human factors is greatly reduced. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

Product Identification Chemical name: Bis[2-(3,4-epoxycyclohexyl)ethyl]tetramethyldisiloxane Synonyms: Diepoxycyclohexanethyl-1,1,3,3-tetramethyldisiloxane CAS No.: 18724-32-8 Molecular formula: C20H38O3Si2 Molecular weight: 382.68 Boiling point: 400 °C @ 760 mmHg Density: 0.997 g/mL Refractive index: 1.476 Specification Appearance: Colorless transparent liquid Purity: 98.00%min by GC Moisture: 0.50%max Package Regular Packing: N.W 20kg/200kg iron drum lined with plastic Sample Packing: 0.1kg-1kg plastic bottle Transport Information Classification: Non-dangerous goods HS Code: 2931909090 Status & Application Status: Industrial scale Application: Bis[2-(3,4-epoxycyclohexyl)ethyl]tetramethyldisiloxane contains epoxy groups, the epoxy groups have high reactivity, and polysiloxane with the epoxy groups can obtain a novel functional organic silicon polymer through further ring-opening reaction of the epoxy groups.

• non-stick rolling pin made from hygienic plastic with practical distance ringsmade from silicone • the distance rings determine the roll-out thickness of thedough • ideal for rolling out and winding up fondant and marzipan coatings, butalso suit

The piping system consists of high-quality NiroSan® SF press fittings with red moulded sealing rings made of FKM and NiroSan® stainless steel system pipes according to EN 10312. Specially made for all applications that require silicone free components. Silicone-free moulded sealing rings are ideally suited to applications such as varnishing and painting industries. All NiroSan® SF press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance.  Certified in accordance with all relevant national and European certification bodies.

Manufacture of bespoke “O” rings specialising in silicones and fluorosilicones. Made from extruded sections cut to length and the two ends joined by vulcanisation to ensure a durable bond and maintaining the integrity of the seal. Sections and materials available are sponge, hollow tube, solid, D shape, rectangular etc. Rectangular picture frame gaskets with mitred corners can also be made in this way.