Results for

Sheet metal constructions - Import export

Turkey

The air duct is made of sheet metal construction. It is possible to make the desired air setting with air valves. Thanks to the mica glass, the cleaning process of the product can be clearly seen. The air duct is used to separate foreign substances that are lighter than the product with the help of air. It is mounted in front of the garbage separator and at the outlet of the peeler. The feeding table located at the product entrance ensures homogeneous goods flow throughout the channel. The rear curtain, which is moved throughout, allows the duct cross-section to be adjusted as desired by means of adjustment bolts. This precise adjustment of the air speed in the duct ensures that the light substances in the grain passing through the duct are separated in the desired amount.

Request for a quote

Turkey

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons close and the grain balls come into action. Thanks to the plate on the grain rolls, the amount of product can be adjusted and flow is provided

Request for a quote

Turkey

Request for a quote

Turkey

Request for a quote

Turkey

Weight: 0,91 kg Height: 10 cm Width: 200 cm Material: 0,7 mm

Request for a quote

Germany

we process thin sheets, heavy plate, wear-resistant sheet and plate. aluminium sheets, stainless steel sheets, copper sheets, brass sheets and much more, with formates from 3000 to 8000 mm (118" to 315"), with thickness 1 mm – 180 mm (0,039" to 7") welded sheet metal structures, aluminium constructions, industrial profiles

Request for a quote

Sheet Metal & Profile Shot Blasting Machine

BF BLAST MACHINERY INDUSTRY AND TRADE

Turkey

It is a type of sandblasting machine used mostly for the purpose of sandblasting sheet metal, profile, and steel constructions in the manufacturing sector. The conveyor is manufactured as a roll or wire band depending on the need. Tunnel-type sandblasting machines are primarily preferred for preparation before painting in integrated facilities.

Request for a quote

Czech Rep.

AntiCut SINGER This glove is created from a special produced composite of polyamide fibres. Due to a coarser structure they are suitable for heavier work – handling sheet metal, construction material, etc. The comparison table of values according to EN 388

Request for a quote

Czech Rep.

AntiCut H2 This glove is created from a special produced composite of polyamide fibres. Due to their coarser structure they are also suitable for heavier work – handling sheet metal, construction material, etc. Gloves are offered in a variety of designs. The comparison table of values according to EN 388

Request for a quote

Czech Rep.

Sharpking this glove is created from a special composite yarn with glassfiber, polyethylene, polyamide and other ressistant fibres. Retaining fine glove features (feeling in fingers) this glove reaches outstanding values of both abrasion and cut resistence according to EN 388. These gloves contain glass fibres. These gloves are particularly suitable for assembly work, handling sheet metal, handling construction materials, etc., where there is a risk of cuts, scratches, and abrasion. Due to its construction, the glove has an excellent grip ability. Gloves are offered in different versions GRIP – gloves are fitted with nonslip PVC dots SKIN – split cow‘s leather is sewn on the palm; these gloves are primarily used for handling oily sheet metal, on assembly lines, in the construction industry for handling rough materials, in the repair of agricultural machinery, etc. The glove is even resistant against punctures in the reinforced split leather area.

Request for a quote

Czech Rep.

AntiCut MAX5 this glove is created from a special composite yarn Brinix N5 with steel, polyethylene, polyamide and other ressistant fibres. Retaining fine glove features (feeling in fingers) this glove reaches outstanding values of both abrasion and cut resistence according to EN 388. This glove cannot be practically compared with the Aramid one a similar glove would be produced very hardly. The gloves do not contain any glass fibres, which break to pieces during work! These gloves are particularly suitable for assembly work, handling sheet metal, handling construction materials, etc., where there is a risk of cuts, scratches, and abrasion. Due to its construction, the glove has an excellent grip ability.

Request for a quote

FC.18107 Counter, metal, display with perforation and hooks

Poland

Classic Battery and Accessories Display This functional metal display for batteries and small accessories is an ideal solution for stores, wholesalers, and other retail outlets. The rack is made of perforated sheet metal and a solid metal construction. The perforation of the sheet metal allows for precise adjustment of the hook layout to the size of the products. This allows you to create a clear and attractive display that will easily grab the attention of customers. The hooks on the display can be customized to meet the individual needs of the customer. Single, double, reach-out, and hooks of any length are available. The display has detachable legs/base, which makes it easy to store and transport. It can be easily folded.

Request for a quote

Sheet metal forming machine Kraftformer KF 470

Germany

Forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming and straightening. The electronic display of the control system visualizes operations, fault tracing and indicated maintenance rates which ensure an optimum machine utilization. Storable processing programs allow repeatable results. This Kraftformer model is particularly recommended for the forming of sheet metal in the industrial metal construction sector as it is capable of machining large steel components with a sheet thickness of up to 3 mm. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). • choice of two preselectable stroke speeds • adjustable reverse position • 4 storable processing programs • repeatable results • electronic display/fault tracing Max. forming capacity Steel 400 N/mm²: 3.0 mm Aluminium 250 N/mm²: 4.0 mm Inox 600 N/mm²: 2.0 mm Contact us for a customised offer, tools included!

Request for a quote

Germany

We turn your ideas into reality! For example as clean steam - boiler steam converters for connection to saturated steam units for sterilization and disinfection in hospitals. Stainless steel design Do you have specific ideas or requirements which will have to be fulfilled? We will gladly face the challenge. We manufacture according to your specifications! Our products are made of steel and stainless steel, custom-made for our clients. Tanks and other reservoirs made of steel and stainless steel, e.g. as clean steam - boiler steam converter Stair railings and staircase design Steel and stainless steel tube and sheet metal constructions Wrought iron garden fences and entrance gates Gate systems (also with operator) Garden fences Banisters for balconies and terraces Product displays Covers and hoods Sign holders Tanks and pressure vessels for leisure boats, caravans and other applications Dock constructions, fixtures and other accessories for aquatic sports DINO Anlage- und...