Results for
LIKA ELECTRONIC S.R.L.
Italy
Lika offers a complete range of Profinet-certified absolute encoders. Available in both low cost 27-bit resolution multiturn EM- series and high resolution singleturn (18-bit) and multiturn (30-bit) H-series, Profinet IO encoders fully comply with the Encoder Profile Specifications V4.1 version 3.162 based on the PROFIdrive profile. Furthermore they fulfill the requirements of the Application Classes 3 and 4 and support both the RT real-time transmission mode and the IRT isochronous real-time mode to meet precise and deterministic data exchange needs (jitter less than 1 µs and cycle time down to 1 ms). Profinet encoders support the standard telegrams 81, 82, 83 and 84 and implement advanced functions such as full scaling, preset, code sequence, position and velocity readout, diagnostic information. Among the key benefits: real time communication, deterministic synchronization, complete diagnostics, IT integration.
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
The range of incremental encoders fit to be coupled to motor shafts includes different mechanical types: the series RE400, with flange diameter 53.5 mm and RE470, with flange diameter 72 mm, provide a coupling joint, while the series RE410 and RE450 avail on a hollow shaft. Different measures are available for the joint hole and for the shaft diameter. All the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for all the series (type RE401/RE411/RE451/RE471)
Request for a quoteSIKO GMBH
Germany
Magnetic, absolute multi-turn rotary encoder WV36M/SSI -batteryless, with SSI interface. Owing to its double ball bearing, small design and wear-free magnetic measurement method, the WV36M/SSI is also best suited for positioning jobs in mechanically demanding environments. Compact design (36.5mm diameter). SSI interface. IP65 protection category. Multi-turn without battery. Double ball bearings. 13 bit multi-turn (8192 revolutions). 12 bit single-turn (4096 steps).
Request for a quoteSIKO GMBH
Germany
The AV58M rotary encoder with teach-in function is a magnetic absolute value encoder with analog output. The user himself can set the rotary encoder's desired measurement range via two buttons on the rear as well as two external inputs. The device features a batteryless multi-turn technology. Absolute analog encoder. 12 Bit (4096) resoluttion over the measuring range. Operating tmperature until -40 °C. Voltage (0 … 10 V)/ current (4 … 20 mA) outputs. Programmable measuring range via teach-in function with key funkcion or external inputs.
Request for a quoteSIKO GMBH
Germany
The AH36M rotary encoder with teach-in function is a magnetic absolute value encoder with analog output. The user himself can set the rotary encoder's desired measurement range via two external inputs. The device features a batteryless multi-turn technology. Absolute analog encoder. 12 Bit (4096) resoluttion over the measuring range. Operating tmperature until -40 °C. Voltage (0 … 10 V)/ current (4 … 20 mA) outputs. Programmable measuring range via teach-in function with external inputs. Hollow shaft with ø6 mm.
Request for a quoteSIKO GMBH
Germany
Magnetic, absolute multi-turn rotary encoder WV36M/CAN - batteryless, with CANopen or SAE J1939 interface. Owing to its double ball bearing, small design and wear-free magnetic measurement method, the WV36M/CAN is also best suited for positioning jobs in mechanically demanding environments. Compact design (36.5mm diameter). CANopen (DS406) or SAE J1939 (DS417) interface. Multi-turn without battery. Double ball bearings. 12 bit multi-turn (4096 revolutions). 12 bit single-turn (4096 steps).
Request for a quoteSIKO GMBH
Germany
The IG06 incremental encoder features a low-cost design with through hollow shaft and can be mounted easily. Resolutions of max. 1024 pulses/revolution. Through hollow shafts up to ø20 mm. Housing made of impact-resistant plastic. Low-cost version.
Request for a quoteSIKO GMBH
Germany
The IG07 is a robust incremental encoder with through hollow shaft, which is nearly indestructible even under the harshest ambient conditions. Resolutions of max. 1024 pulses/revolution. Through hollow shafts up to ø20 mm. Housing made of zinc die-cast. High shaft load rating, radial 5600 N, axial 1400 N.
Request for a quoteSIKO GMBH
Germany
High resolution, magnetic scanning, sturdy plastic housing in especially flat design - for applications with restricted space conditions, e.g., in drive technology or medical technology. Installation depth 25 mm. Resolutions of max. 2000 pulses/revolution. Through hollow shafts up to max. ø14 mm with plain or ball bearing. IP50 protection category (plain bearing), IP63 (ball bearing). Housing made of reinforced plastic.
Request for a quoteSIKO GMBH
Germany
Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø28 mm. M12 or cable connection
Request for a quoteSIKO GMBH
Germany
Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø15 mm. Robust bearing construction. -40 °C … +85 °C operating temperature. High shock and vibration resistance
Request for a quoteSIKO GMBH
Germany
Incremental Profile AG02 Incremental: Easy mounting Through hollow shafts up to max. ø14 mm Integrated magnetic position encoder on output shaft Integrated motor control (option)
Request for a quoteSIKO GMBH
Germany
Incremental Profile AG01 Incremental: Easy mounting Through hollow shafts up to max. ø14 mm possible Integrated magnetic position encoder on output shaft Electrical connection via cable or connector
Request for a quoteSIKO GMBH
Germany
Sturdy and powerful actuator for simple positioning jobs Easy mounting. Through hollow shafts up to max. ø14 mm. Integrated magnetic position encoder on output shaft. Integrated motor control (option).
Request for a quoteSIKO GMBH
Germany
High-performance compact actuator for simple positioning tasks Easy mounting. Through hollow shafts up to max. ø14 mm possible. Integrated magnetic position encoder on output shaft. Electrical connection via cable or connector.
Request for a quoteSIKO GMBH
Germany
Metal housing with hollow shaft Profile AH36M: Absolute analog encoder 12 Bit (4096) resoluttion over the measuring range Operating tmperature until -40 °C Voltage (0 … 10 V)/ current (4 … 20 mA) outputs Programmable measuring range via teach-in function with external inputs Hollow shaft with ø6 mm
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
Engineered on the basis of a compact innovative technology, the incremental encoders E30, offer great accuracy and reliability in a small size, and an excellent price/performance ratio. The incremental encoders E30 are available both in the bidirectional version (E30) and in the bidirectional type with zero reference pulse (E31); the pulses per revolution no. ranges from 2 to 12500. Their body diameter measures 30 mm only, with shaft diameter 4 or 6 mm. The encoder E30 is housed in an ABS plastic case, with axial cable or connector outlet. The output signals can be provided in NPN open collector, push-pull or line-driver format.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ELAP AUTOMAZIONE INDUSTRIALE
Italy
The range of incremental encoders with 58 mm round flange includes different mechanical types: the series RE520, with centering mask diameter 50 mm, compatible with the international standard SIZE23, RE540, with centering mask diameter 36 mm and RE510 with centering mask diameter 31.75. All the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats and the shaft diameters. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for all the series (type RE521 etc.).
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
The small size encoders series E40 feature great accuracy and compact size. The incremental encoder E40 can be supplied with different mechanical flanges: the type E40 has 6 fixing holes on diameter 30 mm, while the type 40A has 4 holes on diameter 25.4 mm; the encoder E40V has a front fixing screw, and the series E40Q is provided with a square flange of mm 43×43. The types E40M and E40S are hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (E40 or E41). The series standard case is out of ABS plastics, with axial or radial cable or connector outlet; series RE40 with aluminium housing and IP65 radial cablepress outlet is also available.
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
Compact sized encoders series REC fit to any application where short body dimensions are required – the case length only measures 38 mm. REC encoders are available with different mechanical versions: with round flange and servo copling (type REC520/REC540), square flange (REC620) or hollow shaft, with (REC450) or without elastic support(REC440). The case is out of strong aluminium and connections are ensured by the connector type M12, or optionally by cable. The encoder with M12 connector output is UL Listed for the canadian and US markets. The pulses per revolution number ranges from 2 to 12500.
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
The small size encoders series RE40 feature great accuracy, compact size and stoutness. The incremental encoder RE40 can be supplied with different mechanical flanges: the type RE40 has 6 fixing holes on diameter 30 mm, while the encoder E40V has a front fixing screw, and the series RE40Q is provided with a square flange of mm 43×43. The types RE40M and RE40S are hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (RE40 or RE41). The aluminium housing, with axial or radial cable gland, grants IP65 protection degree against environmental agents.
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
Stout and reliable the incremental rotary encoders series SEB/SEB-Z can be employed in severe conditions. They can be supplied in the bidirectional type (SEB) or bidirectional with zero reference pulse (SEB-Z). The number of pulses per revolution ranges from 2 to 12500. The types SEB-M/SEBZ-M operate according to the magnetic principle, with a number of ppr ranging from 8 to 2048. The ABS plastic case offers high protection against environmental agents – IP65 degree, which can be upgraded to IP66 with the optional O-ring mounted on the encoder shaft. The connections are provided by cable or connector in axial position; the output signals can feature the NPN open collector, push-pull or line-driver format.
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
The flexible joint mounted on the encoder shaft grants a very good coupling, without parallel and angular mis-alignment, and avoids overloads, which can damage the bushings life. Elap measuring wheels are fit for the use in touch with metal, steel profiles, varnished surfaces, plastic materials, paper, cardboard, wood, fabrics and leather; they offer an excellent resistance to oil, fuels, ozone and environmental agents.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Plastic housing - stainless steel shaft - conductive plastic element with precious metal wiper - central mounting thread M6 x 0.75 in brass - potted rear solder pins.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by means of Hall sensors - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 and 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. To achieve the SIL2 level, the TRT/S3 contains addtitional internal monitoring mechanisms as well as safe communication via PROFIsafe. The PROFIsafe protocol is implemented according to the PROFIisafe Profile for Safety Technologie version 2.4 (PNO Order No. 3.192)
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integrated absolute multiturn gearbox for the acquisition of revolutions - optional potting against water jets (IP 69K) - electrical connections via round plug M12x1 or lead exit.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by mens of Hall sensors - multiturn version with absolute transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via Profibus-DP. Robust housing manufactured from seawater-proof aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal - sensor circuit consisting of ASIC with Hall elements - electrical connections via the connecting cap with threaded cable connections. The absolute encoders are designed for direct connection to the PROFIBUS-DP. The interface is implemented with the SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality in accordance with Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanicallly and electrically compatible with the electro-optical encoder CRD.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Robust aluminium case - Stainless steel shaft, Ø 10f7 shaft with flat (9 -0.1 mm), RS bearing with NILOS ring - Potted housing for IP 69K protection - Electrical connection via 2 sensor plugs (M12 plug, 5-pin, pins) for bus 1 and bus 2. One hex rotary coding switch each for setting the address under the blind plug
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
A positive-locking mechanical connection between the cus-tomer’s shaft and the sensor shaft ensures that the magnet in the sensor shaft precisely reflects the rotation of the cus-tomer’s shaft. With the TBN model, one rotation (i.e. max. 16,384 steps) is recorded.With the subsequent absolute transmission, the TRN shaft encoder reaches a measuring range of up to 4096 rotations. The position and speed values (PDO - Process Data Object) are output via the CANopen protocol.
Request for a quoteResults for
Shaft encoders - Import exportNumber of results
63 ProductsCountries
Company type