Results for
QUELLTECH GMBH
Germany
Particular Challenges: The seal surfaces in this case are made of very glossy metal, with the drawback of emitted reflections. This effect during an optical measurement must be eliminated. Furthermore, it is absolutely necessary to guide the laser scanner on a linear path over the surface, since fluctuations of distance may falsify the measurement result. QuellTech Solution: The Quelltech model Q5 disposes of an adequate resolution in X and Z direction and proves to be able to verify the planarity tolerances and to measure the size of defects. Meanwhile a precise rotary axle, used as guiding element, moves the scanner over the surface to be evaluated. Interfering artefacts caused by the glossy finish are suppressed by particular algorithms integrated within the software. As an encoder value is permanently supplied by the rotary axle, the position of each scanner profile within the point cloud can accurately be determined.
Request for a quoteENERCON INDUSTRIES LTD
United Kingdom
Many of the issues causing poor seals happen upstream, in the filling or capping area: a seal cannot be achieved with a missing cap or a cap with a missing foil. The capper can also cause stalled bottles under the induction coil where caps are loose or partially fitted or the cap is incorrectly fitted or too high. Issues downstream from the sealer can cause containers to back- up under the sealing head. Enercon produces a range of sensors to help ensure that the sealing process is running faultlessly, producing consistent, reliable seals on every container. • Stalled Bottle and Backlog Detector • Missing Foil Sensor • High Cap Detector • Stack light assembly • Variable Speed Conveyor Systems • Spare Parts Kit • IQ/OQ Kit
Request for a quoteMICRO-EPSILON
Germany
Sensors can be adapted to suit customer-specific applications. Particularly for a large number of pieces, customized sensors can be produced efficiently, which results in considerable cost reductions. The compact PCB which contains the sensor element and the evaluation electronics is responsible for the signal preparation, signal evaluation and signal output. The type of measurement (distance or rotational speed measurement) and the required frequency response are adaptable. In addition, the interfaces offer numerous connectivity options. There are several outputs such as current, voltage, PWM and further digital outputs. The design of the housing, the material and the protection class can be adapted to the specific requirements. In cases where space is limited, the side shifted measurement offers a space-saving alternative. For harsh environments, the sensor is designed with a fully sealed stainless steel housing that withstands high pressure, dirt, aggressive chemicals (acids)
Request for a quoteNOVOTECHNIK MESSWERTAUFNEHMER OHG
Germany
High-precision potentiometric rotary sensor. Robust and sealed design
Request for a quoteNOVOTECHNIK MESSWERTAUFNEHMER OHG
Germany
High-precision potentiometric rotary sensor. Robust and sealed design with current interface
Request for a quoteTATEYAMA KAGAKU CO., LTD.
Japan
We have newly developed an thermistor sensor for Automotive. This is suitable for measurement of EV and HEV motors and batteries temp. It has begun to be widely adopted by Japanese automobile manufacturers. It can also be used for various other purposes. Please contact the following for details. E-mail sensor@tateyama.or.jp
Request for a quoteCOMPUR MONITORS GMBH & CO. KG
Germany
Statox 501 Infratox detects gases in the LEL and ppm range. Protecting people and assets from hydrocarbons The infrared absorption method of gas detection is ideal to detect hydrocarbons such as fuels. It features enough sensitivity to expand the range of application into the ppm range. For instance fuels such as gasoline, diesel or kerosene are mixtures of hydrocarbons. Infrared gas detection theory of operation Some gases absorb light at a certain wavelength (colour). This absorption band is specific to the gas. The rate of the absorption depends not only on the substance to be detected but also on the number of gas molecules (i.e. the concentration of the gas). This premise is used to detect gases. For example, the C - H bond in hydrocarbon molecules will oscillate and absorb light at 3, 4 mm. This fact makes it so easy to detect fuels. Hexane, for instance has 14 C - H bonds compared to Methane which has only 4! A light beam is directed through a cuvette filled with the gas to be detected. The more hydrocarbons are present, the more light will be absorbed. A photo detector at the other end of the cuvette measures the remaining light intensity. The difference between the original and remaining light intensity corresponds to the gas concentration. A reference beam with a different wavelength compensates for potential interferences of dust, humidity or variations of intensity from the light source. Fail-safe technology Failure of important components such as the light source or photo detector will trigger a "system fail" alarm. Most local authorities will accept this as a self-diagnostic feature. Systems including a self-check require less maintenance and calibration, saving time and money. Simple maintenance: Easy to read display and non-Vintrusive calibration The bright LED display of the Statox 501 Infratox shows the gas concentration in percent L.E.L. (Lower Explosion Limit). An important accessory is the calibration adapter, featuring control buttons operating Hall-sensors inside the Ex d housing. The service menu is password protected preventing unauthorised access. All parameters can be checked and changed, or a calibration can be done all without opening the transmitter. The adapter is also equipped with a gas outlet so that it can be used for flow-through applications. Impervious compact design The dimensions of the Statox 501 Infratox are small and compact. The sensor compartment is completely sealed, not allowing dust or insects to enter. It is located in the center of the sensor head. This allows heat radiation from the electronics and the infrared lamp to keep the unit a few degrees above the ambient temperature thus avoiding condensation. This innovative design makes any additional heating unnecessary, allowing the sensor head to be very energy efficient. This saves additional money by eliminating more expensive wiring and a bigger power supply that would otherwise be necessary. The sensor head is rated protection class IP 67 (6 = protection even against fine dust, 7 = submerged 1 m deep in water for 30 minutes). You can have confidence that this system will safely operate even in the harshest environment.
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
The AtmoProbe™ is an industrial atmosphere sensor that provides extremely accurate and repeatable measurements, and may be used in a variety of atmosphere measurement applications. The proprietary design of the AtmoProbe™ utilizes a 100% solid zirconia electrolyte sensor mounted within a solid zirconia seat. The solid slip-cast zirconia sensor eliminates seams and seals near the measurement point that typically cause offsets and premature failures of most oxygen probes. Furthermore, the unique secondary 100% zirconia seat serves as a shock absorber and provides an extremely robust mechanical design that can handle repeated temperature cycling and mechanical stresses without damage.
Request for a quoteWHITE STEEL GMBH
Germany
DESCRIPTION High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION Bags Forming Section – Rollers carried the bags roll driven by servo motor. – Sealed process done by a special mechanism according to the required dimensions controlled by sensors. Filling and sealing Section – Multihead weigher provides regular continuous flow during the filling process equipped with electronic scales connected to the control panel to achieve the required packing quantity. – Pouch Seal mechanism by thermal heaters and a knife, welldesigned, long life. – Conveyor to transfer bags out of the machine. Technical specifications – The pouch dimensions can be adjusted by sensors and a printed sign on the roll. – Its form and fills various types of bags.
Request for a quoteEM-TECHNIK GMBH
Germany
The pipe or tube of the 2T pipe connector is inserted through the connector as required for bead tubes, immersion tubes, thermometers or sensors, etc. It consists of a sealing cone which is pushed into the matching inner cone of the connector and acts as a bushing for the pipe while performing a sealing function. An additional O-ring, which is protected from damage by a pressure disc, holds the pipe in place and prevents it from being pulled out accidentally.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via EtherCAT. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. In the model series TRK absolute encoders, the EtherCAT interface is integrated according to IEC 61158-2 to 6 and encoder profile CiA DSP406. To achieve the SIL2 level, the TRK/S3 contains a redundant sensor system and additional internal monitoring mechanisms as well as safe communication via the FSoE (failsave over EtherCAT) protocol. The FSoE protocol is implemented according to the Safety over EtherCAT specification ETG.5100 version 1.2.0.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by means of Hall sensors - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 and 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. To achieve the SIL2 level, the TRT/S3 contains addtitional internal monitoring mechanisms as well as safe communication via PROFIsafe. The PROFIsafe protocol is implemented according to the PROFIisafe Profile for Safety Technologie version 2.4 (PNO Order No. 3.192)
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via EtherCAT. Robust housing (housing sickness 5 mm) manufactured from seawater-resistant aluminium (AlMgSi1) or stainless steel - stainless steel shaft - ball bearing with shaft seal - sensors circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. In the model series TRK absolute encoders, the EtherCAT interface is integrated according to IEC 61158-2 to 6 and encoder profile CiA DSP406. As a "full slave", the TRK supports all EtherCAT addressing modes such as logical addressing, position addressing and node addressing. Use of the CANopen over EtherCAT message and the CANopen encoder profile enable parameter and diagnostic data handling as familiar from CANopen. These are contained in an object directory under the same indices as in the case of CANopen.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by mens of Hall sensors - multiturn version with absolute transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via Profibus-DP. Robust housing manufactured from seawater-proof aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal - sensor circuit consisting of ASIC with Hall elements - electrical connections via the connecting cap with threaded cable connections. The absolute encoders are designed for direct connection to the PROFIBUS-DP. The interface is implemented with the SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality in accordance with Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanicallly and electrically compatible with the electro-optical encoder CRD.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 - 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. Setting the address, baud rate or terminating resistances is not necessary. A name, which is stored in the absolute encoder's non-volatile memory, is assigned via the PROFINET controller to address the device.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via Profibus-DP. Robust housing manufactured from seawater-proof aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal - sensor circuit consisting of ASIC with Hall elements - electrical connections via the connecting cap with threaded cable connections. The absolute encoders are designed for direct connection to the PROFIBUS-DP. The interface is implemented with the SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality in accordance with Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanicallly and electrically compatible with the electro-optical encoder CRD.
Request for a quoteVILLINA LLC
Russia
The main parts of magnetic couplings used in GNVC series vertical pumps are the driving (external) and the driven (internal) half couplings, and a sealing sleeve between the half couplings. The exceptional reliability of Villina magnetic couplings is the result of a high-tech design: the enclosed capsular design of the half couplings (enclosed body) secures the magnetic systems from environmental effects; the use of special adhesives allows for fast fixture of domestically produced permanent magnets based on rare-earth elements on the half coupling ferrules; double protection against overheating and demagnetization is implemented using the temperature sensor of the sealing sleeve, which is triggered when the maximum acceptable operating temperature is exceeded by 20 to 50°C, with the use of magnets with Curie point of more than 100°C higher than the maximum acceptable operating fluid temperature; the sealing sleeve made of high-strength Hastelloy alloys
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FLOW-TRONIC
Belgium
The IFQ LOGGER is a portable converter and logger for Flow-Tronic flow sensors. It disposes of one RS485 digital serial communication port with specific communication protocols for RAVEN-EYE or BELUGA flow sensors and one 4-20 mA input for external level. The IFQ LOGGER combines high performance with low power requirements. The unit needs 12 VDC nominal power supply either provided from an optional battery pack or solar panels. The IFQ LOGGER keeps the same easy configuration enhanced by the IFQ MONITOR and stays in line with the flexible and modular architecture launched by the RAVEN-EYE. All flow sensors are field interchangeable. A dry contact output is available for users needing an output for samplers or any other instrument. KEY FEATURES: 1 x RS485 digital sensor interface for velocity (RAVEN-EYE or BELUGA) 1 x 4-20 mA analog input for level sensor 7 position sealed membrane keypad 2 Gb memory (SD card) Power supply : 9 to 18 VDC Enclosure: PPC (IP67)
Request for a quoteResults for
Sensor for seals - Import exportNumber of results
19 ProductsCompany type
Category