Section cable - Import export

The industrial and power from a stationary installation inside the building and on the air. Out of buildings can be used if there is no sunlight influence on cables. Can be used on the wall or under, dry, damp and wet buildings. It can be laying into channels without influence of stretching forces. Cable has a filler, it is fire residence and flexibleThe copper cores with section 1,5-6mm2 inclusive are produced with single wire of 1 class flexibility, 10-35mm2 inclusive with twisted multi-core wires ( 7 wires) of 2 class flexibility, according to standard Gost IEC 60228 – 2004 Number of cores in the cable 1:5

Professional chromed stapler with plastic-covered handle (for insulation). Ideal for fixing to the wall electrical, telephone and television cables, suitable for professionals such as electricians, aerial fitters and harness makers. M 77 for staples series 77 with length of 9,5-11 mm with 6,45 mm width and section 0,60x1,18 suitable for electric and telephone cables with section Ø 5,5 mm. M 88 for staples series 88 with length of 12-14 mm with 8,00 mm width and section 0,60x1,18 suitable for electric and telephone cables with section Ø 6,5 mm.

1.It is suitable for cables with cross-sections of 2.5mm2,4mm2 and 6mm2. 2.It also can be used for riveting lathing pins or stamping pins. 3.Which is for a small quantity of PV cable and terminals.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A                                               Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)

PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A                                               Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)

PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A                                               Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)

Insulation material: PPE/PA Safety degree: II Rated current:35A Flame class: UL94-V0 Rated voltage:1500VDC Ambient temperature range:-40-+85(IEC) Test voltage:8kV(50Hz,1min) Suitable cable cross sections:2.5-6mm2/14-10AWG Contact resistance: less than 0.25mohm Connecting system: Crimp connection Contact material: Copper, Tin plated Nut cap locking force:0.8-1.0Nm Degree of protection:IP68(1m,1H) Upper limiting temperature:110(IEC) Overvoltage category/Pollution degree:CATIII/2

CSN® copper and nickel are temperatureresistant connecting cables for internal wiring of electric household appliances such as hotplates, glass ceramic plates, grill appliances or storage heaters. In industrial applications CSN® Cables are preferably used for the wiring of heating elements, heating cartridges, tubular heaters, panel heaters, and quartz radiators. We manufacture these singlecore cables in cross sections up to 6 mm². Owing to their high temperature resistance up to 250 °C in the case of glass silk insulation and 600 °C in the case of mineral fibre insulation, these connecting cables meet the most demanding requirements.

PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A / Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

The Sonic booster range offers professional and reliable solutions for all users. In terms of power, our range starts where other competitors end theirs. Our least powerful batteries deliver more power than most average batteries of competing products. Don't be misled by booster and battery ratings! When it comes to jump starting vehicles, what really maters is the power in Cranking Amps (CA), not in Peak Amps (PA). In addition to powerful AGM batteries, our boosters are all equipped with high-quality components; double insulated cables, fully insulated clamps with curved and bronze jaws and resistant Anderson connectors. The Sonic boosters are professional tools designed for professional and intensive use. Voltage: 12V Starting amps: 440A Peak amps: 1600A Cable length: 60cm Cable section: 25mm² Terminals: 600A AC/DC charger: 1, 3A with charge indicator Battery fuses: 300A

The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 39.5 mm — cable and sensor section separable — especially for sewage, viscous and pasty media Optional Features: — IS-protection Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm pure ceramic (99.9 % AI2O3) — different kinds of cable — different kinds of elastomeres

The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. Since the area of application is often outside a building, great emphasis was placed on overvoltage / lightning protection. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0,35 % (opt. 0,25 %) FSO — diameter 35 mm — cable and sensor section separable — small thermal effect — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — SIL 2 (safety integrity level) according to IEC 61508 / 61511 — different cable and elastomeres — customer specific versions

The separable stainless steel probe LMP 308 is designed for the continually level measurement of water and thin fluids. In order to facilitate stock-keeping and mainten-ance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO — diameter 35 mm — cable and sensor section separable — excellent long term stability — high accuracy Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — SIL 2 (Safety integrity level) — customer specific versions — mounting accessoires as cable gland and terminal clamp of stainless steel — different kinds of cables — different kinds of seal materials

The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O — accuracy: 0.1 % — diameter 39.5 mm — cable and sensor section separable — HART®-communication (setting of offset. span and damping) — permissible temperatures up to 85 °C — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm (AI2O3 99.9 %) — accessories e.g. mounting flange with cable gland and terminal clamp

The LMP 308i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation of sensor intrinsic deviations from normal condions like nonlinearity and thermal error. In order to facilitate stock-keeping and maintenance the transmitter body is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ...4 mH2O up to 0...200 mH2O — accuracy: 0.1 % FSO — diameter 35 mm — cable and sensor section separable — thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K — high accuracy — communication connection — turn-down 1:10 Optional Features: — IS-version — mounting accessories as cable gland and terminal clamp in stainless steel

For preassembled cables and simple maintenance PFLITSCH brought the first completely splittable plastic single cable gland to the market in the form of the UNI Split Gland. This product allows preassembled cable to be fed through a hole or the replacement of old or defective cable glands, without having to interfere with the existing cable installation or switch off the affected machine. Your advantages: Split cable gland body, pressure screw and counter nut in size M20, M25 and M32 for over 100 different sealing inserts For cable cross sections of 2.0 mm to 20.5 mm Ingress protection rating IP 67 Superior strain relief values to EN 62444 class A Ambient temperatures of -20 °C to +80 °C

Strong crimped plug/cable attachment Circular cable cross section to reduce kinking and twisting Various cable lengths available Types: MicroMag surface + air thermocouples Easy to place, ideal for difficult-to-access car body shell areas Encapsulated magnet design allows reliable direct use even on wet painted and e-coated substrates IRMAG surface thermocouple Designed to measure ferrous substrates in IR cure ovens Robust alternative to Adhesive Patch thermocouple, combines easy attachment and fast thermocouple response Magnetic surface + air thermocouples Magnet offset from sensor prevents heatsink effect PTFE handle for easy removal or repositioning PTFE-coated to prevent sticking Aluclamp surface thermocouple Clips onto the edge of an aluminum car hood or other nonferrous panel Allows measurement of surface temperature at center of panel Aluminum automotive thermocouples with a spring-loaded bobbin for use on aluminum car body shells

Splittable plastic and metal versions seal preassembled cables The splittable flange variants UNI Flange in plastic and UNI Flange HD (Heavy Duty) in metal have been well-designed by PFLITSCH as product solutions for use in harsh industrial environments to provide reliable cable entries for preassembled cables. A two-part frame manufactured from high-quality grey or black PA plastic or die-cast zinc can be inserted into standard 112 mm x 36 mm sheet metal cut-outs for 24-pin rectangular heavy-duty plug-in connectors and provides the cable entries with a reliable seal. Your advantages: Three integrated cable glands for over 100 different sealing inserts Cable cross sections from 2.0 mm to 20.5 mm Ingress protection rating IP 66 Superior strain relief values to EN 62444 class A Ambient temperatures of -20 °C to + 80 °C

Halogen-free junction box with pre-mounted, soft plug-in seals, approved for maintaining electrical functionality according to DIN 4102 Part 12. Maintenance of electrical functionality to classes E30 to E90. Colour: Pastel orange. Including pre-mounted connection unit made of high temperature-resistant special ceramic and labelled protective conductor terminal. Supplied with fuse holder TE-FH 520 for VDE-conformant, reaction-free protection of consumers and 2 fire protection screw ties MMS 6x50 for anchorless fastening. Power cable nominal cross-sections: 1.5 to 10 mm² depending on the type, data cables with 0.8 mm wire Ø. Several rigid copper wires with smaller cross-sections per terminal possible. High protection rating IP66, impact resistance class IK08. Details on the cable types and manufacturers can be found in the general construction test certificate of the material testing institute NRW, Erwitte.

The Metzner AM 1000 is a sensation among the tabletop units. The automatic cutting and stripping machine processes cables, strands and wires up to 9 mm diameter and 6mm² cable cross-section with a special cutting and pull-off force (optional 10 mm², depending on material). The presettings are conveniently made via the modern 12" touch panel, where the operator can define all processes. Thanks to the sensors for diameter and material recognition, the AM 1000 works extremely precisely. Another special feature is the tool-free replacement of guides and rollers. This means that the AM 1000 can be changed over in just one minute. With the extensive interface preparation, the machine can be optimally expanded with peripheral devices and adapts to all customer requirements. The compact design with retractable touch-screen and the low weight of only 28 kg also offer special comfort. This makes the AM 1000 especially easy to transport.