Results for
VKF RENZEL GMBH
Germany
This stable leaflet stand has a weighted plastic base and allows easy removal of leaflets with its stepped arrangement of dispensers. For ease of storage it comes with a carry bag. Size when collapsed down: approx. 490 mm high.
Request for a quoteHAGO BAUTECHNIK GMBH
Austria
Load capacity: 15 kN test load EN 124. Material: Frame made of aluminium extruded sections. Cover made of 3/5 mm aluminium chequerplate. Aluminium reinforcement to the underside. Stainless steel screws. Features: Sealed cover. EPDM seal. Completely rust-proof. Light weight. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly where corrosion-resistance and/or low weight are of great advantage. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 3.5 cm Total height including reinforcement of bottom ≈ 7 cm Special sizes possible *S = available from stock *O = to order
Request for a quoteBILOTSERKIVLYT LLC TM "BRIZOLL"
Ukraine
The stylish BRIZOLL compartmental dishes are made of solid beech wood - an absolutely eco-friendly and high-quality material. Beech is denser than oak, has better performance and hygienic characteristics and is well suited for making tableware.
Request for a quoteBILOTSERKIVLYT LLC TM "BRIZOLL"
Ukraine
It is a handy and practical thing in which you can arrange different foods and dishes without mixing them together. The 5 not too deep sections are equally suitable for serving olives, cheese, nuts, fruit, antipasti, and any snacks or delicacies you like!
Request for a quoteBILOTSERKIVLYT LLC TM "BRIZOLL"
Ukraine
It is a handy and practical thing in which you can arrange different foods and dishes without mixing them together. The 5 not too deep sections are equally suitable for serving olives, cheese, nuts, fruit, antipasti, and any snacks or delicacies you like!
Request for a quoteBILOTSERKIVLYT LLC TM "BRIZOLL"
Ukraine
A compartmental dish is a super popular dish for serving snacks and appetisers!
Request for a quoteBILOTSERKIVLYT LLC TM "BRIZOLL"
Ukraine
The compartmental dishes are impregnated with a special mineral oil that protects the wood from drying out and closes its pores against bacteria. This oil is pure and safe for health. Thanks to this treatment, the surface does not absorb odours and is very easy to clean.
Request for a quoteBILOTSERKIVLYT LLC TM "BRIZOLL"
Ukraine
The stylish BRIZOLL compartmental dishes are made of solid beech wood - an absolutely eco-friendly and high-quality material. Beech is denser than oak, has better performance and hygienic characteristics and is well suited for making tableware.
Request for a quoteFRIGO SYSTEM
Turkey
Available for H1 (-1/+10) temp. class We have all the modules under remote section. Additionaly, company can produce 2/3 door cabinets under plug in section 2, 3, 4, 5 doors versions Glazed doors with anodized aluminium finishing Trim heaters in the frame & doors Wide display area and base tray Plastic bumper protection Standard LED doors lighting Shelves with 760 mm length Powder coated or stainless steel options for shelves Internally mirrored or glazed sidewalls Equal air flow between display shelves RAL color options
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
The linear motion potentiometers series PR2S have a 26 mm diameter round section housing, 5 mm diameter shaft and two ball joints at the ends. Their measuring strokes range from 25 to 150 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The IP65 protection degree against environmental agents allow to employ the potentiometers series PR2S for severe applications, even outdoors, at extreme temperatures. AVAILABLE STROKES mm 25 – 50 – 75 – 100 – 150 AVAILABLE RESISTIVE VALUES 5 KOhm (standard) – Optional: 1 KOhm for PR2S 25
Request for a quoteELAP AUTOMAZIONE INDUSTRIALE
Italy
The linear motion potentiometers series PR have a 26 mm diameter round section housing and 5 mm diameter shaft. Their measuring strokes range from 25 to 150 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The IP65 protection degree against environmental agents allow to employ the potentiometers series PR for severe applications, even outdoors, at extreme temperatures. The potentiometer PR mounting method is extremely easy: it can be fixed by means of metal clamping brackets, or by the front screw thread. Several fittings are available: ball joint, self-aligning joint, feeler pin.
Request for a quoteLANTECH
Netherlands
Cold Package Cold Package option allows efficient operation of stretch wrapper in an environment where the temperature range is +31 to +10 degrees Fahrenheit. Top Sheet Dispenser Two to four mil poly film, 80" wide is automatically applied over the top of load for moisture and dust protection. In-line top sheet dispenser model applies and secures sheet of film over load as it indexes into the wrap zone with no interruption to the wrapping cycle. Mid-wrap top sheet dispenser applies and secures sheet of film over top of load during the wrapping cycle. Load is protected with five-sided coverage. Conveyor Sections Available in 5' sections and 10' and 12' wrap zone sections. Close-spaced and tight-spaced conveyor rollers. Standard and non-standard pass heights. Includes safety fencing and additional safety photocells mounted on the safety shield. Additional Wrap Height Capacity For wrapping loads which exceed the 80" wrap height capacity of the standard system. Will handle loads up...
Request for a quoteKOMAX HOLDING AG
Switzerland
The programmable Mira 340 is designed for universal use while maintaining maximum precision. It is perfect for processing wires and insulation material with demanding requirements. The Mira 340 is fitted with a rotary head with 4X-blades and offers unique functions designed to reduce production time and increase quality. As a result, a single machine can be used for a huge range of applications. Thanks to sequential processing, multi-conductor cables and multi-layer insulation material can be processed quickly, thereby saving time. Meanwhile, its ease of use increases productivity. Mira 340 covers a large span of wire specifications up to 16 mm² conductor cross section (AWG 5) and up to 72 mm strip length. It strips, trims and twists wires and cables with maximum precision. Even demanding insulating materials such as tough Teflon®, strong Kapton® and pliable silicon can be processed.
Request for a quoteSAMI KAMMAZ OVENS
Turkey
Dough Preparing Section 1- Water Dosing Unit 2- Spiral Mixer 3- Dough Divider Machine 4- Conical Rounder Machine -------------------------------------------------- Tortilla Production Section 5- A. Tortilla Press section B. Rotary Oven - Four-storey C. Product Resting on Air Section Quality, accuracy, and trust are the basis of our success. For more information about the production line and other products, please contact us via: ◽️ Mobile + WhatsApp: +905365823293 ◽️ E-mail: sami-kammaz@hotmail.com
Request for a quotePRJSC DNEPROMETIZ
Ukraine
To ensure the reliability and durability of sectional fences, Dneprometiz was the first in Ukraine to use the latest technology of pre-processing of galvanized wire OXSILAN. Choice of 6 RAL colors: 6005, 7016, 7030, 7040, 3004, 9005. Cooperating with Dneprometiz, you get a welded 2d mesh: • made of galvanized wire; • with a durable and high-quality coating; • ecologicaly clean; • with a service life of 10-15 years. Types of 2d mesh sections Flat sections D-FENS 2D LE Bar diameter: 5-4 mm; Section width 2,000 - 3,000mm; Section height: 630 - 2000 mm; Cell size: 200x50 mm. Flat sections D-FENS 2D SE Bar diameter: 5-6 mm; Section width: 2,000-3,000mm; Section height: 1030 - 2230 mm; Cell size: 200x50 mm. Flat sections D-FENS 2D XS Bar diameter: 6-8 mm; Section width: 2,500-3,000mm; Section height: 1030 - 2430 mm; Cell size: 200x50 mm.
Request for a quotePRJSC DNEPROMETIZ
Ukraine
To ensure the reliability and durability of sectional fences, Dneprometiz was the first in Ukraine to use the latest technology of pre-processing of galvanized wire OXSILAN. Choice of 6 RAL colors: 6005, 7016, 7030, 7040, 3004, 9005. Cooperating with "Dneprometiz", you get a welded mesh 3d: • made of galvanized wire; • with a durable and high-quality coating; • ecologicaly clean; • with a service life of 10-15 years. Varieties of 3d mesh sections: Profiles with 3-D bend "LEGKA" D-FENS 3D LE Bar diameter: 3-3.5 mm; Profile width 2000 - 2500 mm; Section height: 630-2030 mm; Cell size: 200x55 mm. Profiles with 3-D bend "STANDARD" D-FENS 3D SE Bar diameter: 4-5 mm; Section width: 2,500 mm; Section height: 1030, 2430 mm; Cell size: 200x50 mm. Profiles with 3-D bend D-FENS 3D XS Bar diameter: 5-8 mm; Profile width: 2500-3000 mm; Section height: 1230 - 3030 mm; Cell size: 200x50 mm, 100x50 mm.
Request for a quoteOROSMEDICAL
Ukraine
Functional 2-section bed KFM-2nb-5 basic – buy at ➦ Orosmedical.com.ua. ☎: (099) 290-59-12, (096) 335-36-51.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Section 5 - Import exportNumber of results
18 ProductsCompany type