Results for
THOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
Applications and projects : conveyor systems assembly lines robotic units screwing welding Poka-Yoke vision Pick and Place Some practical examples : roll-forming machine conveyor system with elevator assembly lines for plastic and metal components ergonomic workstation on assembly line unit for recovery, transfer and removal of springs on assembly line
Request for a quotePARSMEGA MAKINA
Turkey
Screw auger is used for horizontal transportation of grain or finished products. It has a U-shaped structure.
Request for a quotePARSMEGA MAKINA
Turkey
Screw conveyors are used to transport grains and powder materials on the horizontal axis. Spiral sheets of different sizes are used depending on the purpose of use. Full spirals are used for transfer purposes only. We produce screw conveyors with capacities ranging from 5 tons/h to 500 tons/h.
Request for a quotePARSMEGA MAKINA
Turkey
Discharge tube screws enable the grain stored in the silo to be transported horizontally and unloaded safely.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accessories made by brass then electric plated.
Request for a quoteKEBA FASTENINGS
Germany
K-TITE high-performance thread rolling fasteners are specially designed to lower your in-place fastening costs. K-TITE fasteners form internal threads into plain holes in ductile materials upon initial installation, which: • Eliminates the need to pre-tap the nut member • Reduces problems associated with assembling screws and bolts into pre-tapped holes, such as cross-threading
Request for a quoteKEBA FASTENINGS
Germany
FEATURES AND BENEFITS Enhancement when compared with Polymate30: • The re-designed geometrical flank allows for the optimized movement of plastic material while initiating the fastening procedure. • Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. • At the same nominal diameter, up to 50% gain in torsional and tensile strength. • As there are a larger core and reduction in the thread pitch length, shorter fasteners and/or smaller diameters may be used. • Improved pitch provides added vibrational safety.
Request for a quoteKEBA FASTENINGS
Germany
The Micro Screw range consists of self-tapping and metric standard screws along with metric threads according to customer-specific applications. When the trend is to minimize the size and weight, these durable and small dimensioned screws provide the required competitive advantage where even the smallest gram and millimeter counts. FEATURES & BENEFITS • Diameter range of M 0.8 – M 2.6 • Lengths reaching up to 10x the thread diameter • Capability of various thread heads • Reliability with 50ppm • Thread-forming of even the smallest components for direct assembly • Cost-effective as additional inserts and add-ons are redundant • Time effective as cycle times are minimized in work-flow • Assembly is possible in the smallest of installation spaces • Available in plastic, light metal, and steel materials for use in automated assembly The Micro Screw is available as self-tapping, metric standard as well as customer-specific applications with metric threads.
Request for a quoteKEBA FASTENINGS
Germany
A Captive Screw can be locked in place on a parent component without being fastened to a child component - Captive Screws are typically locked in place via thread locking, press-fitting or broaching - Captive Screws help control costs by minimizing damage to machinery from loose screws and by reducing the need for replacement fasteners - Captive Screws allows for easier and more efficient repairs due to quick access to components - Captive Screws prevents damage from loose screws falling into moving parts or electrical circuits as well as the loss of screws - Captive Screws also provide longer durability as they do not cause damage to the application after usage cycles; they are permanent, yet allow access into the application
Request for a quoteKEBA FASTENINGS
Germany
• Compatible with machine screw threads • Provides a high joint strength • Low loss of preload force under high dynamic and thermal loading • Effortless lead-in with low insertion torque for safe assembly • Excellent self-locking vibration resistance • High stripping torque • Allows for a reduction in installation depth
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Introduction: 303 through hardened screw, has better corrosion resistance Tail annealing treatment, greatly improving the toughness of the screw CNC full grinding thread, tooth root top concentric and tooth bottom flatness high precision, can reduce the shear heat. Application: Low acid plastic + GF15 following, such as PMMA, PC and so on Temperature ≤400 ℃ Optical lenses, cosmetic packaging and so on Materials and Process: Material origin: Japan The main components: Cr, V, Mo and so on Heat treatment: vacuum quenching, hardness HRC48-52. (1020-1050 vacuum quenching, high temperature tempering 550-570 more than three times, the rear high temperature annealing softening treatment) Surface treatment: PVD coating (TiN, TiCN, TiAlTiN)
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
With our delivery program “Screws for direct screwing” we deliver a great variety of thread rolling screws in different implementations. In doing so we realize small lot sizes and short-term delivery dates. Upon request we also introduce customer-oriented warehousing also in your company. Apart from the many advantages you can save time and money. We provide: KTG screws for thermoplastic materials: single pass thread or double pass thread (high/low); head shapes with cross or 6-star (similar Torx). Tapping screws: longitudinal slot, cross slot, cross-head-combination slot or 6-star (similar Torx). DIN 7981, 7982, 7983 or to the new ISO standards; special tip-styles, e.g. with with pressed washer. Combination screws with undetachably washers: According to DIN 6901. Self-tapping screws: According to DIN 7500. Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry...
Request for a quoteANTHERMO GMBH
Germany
Nipples available in numerous variants and lengths 3 types of nipples The nipple product group is divided into three different types: Standard pipe nipple concentric pipe nipple eccentric pipe nipple Different endings Nipples are available with a thread or without a thread on one / both sides. The variant without thread can be delivered with beveld or plan end. Nipples can be supplied with the following threads: NPT thread according to ANSI B 16.11 BSP thread according to ANSI B 16.11 G thread according to DIN ISO 228 R thread according to DIN 2999 like BEP.
Request for a quoteANTHERMO GMBH
Germany
Thread fittings according to ANSI B 16.11 Straight from our warehouse We always have numerous versions of threaded fittings (ANSI B 16.11) available in our extensive warehouse in Kamen. We can also supply you at short notice. We only deliver goods of European origin. Different thread types Screw connections can be supplied with the following threads: NPT thread according to ANSI 1.20.1 BSP thread according to EN 10226 G thread according to DIN ISO 228 such as BSP / P R thread according to DIN 2999 like BSP / T. Standards and special requests We supply threaded fittings as standard in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. We can also supply 9000 lbs and special materials if required.
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
aluminium alloy*powdercoated*for rods and*for square rods up to 26 mm Ø*for benches up to 55 mm
Request for a quoteANTHERMO GMBH
Germany
Unions in numerous variants Numerous special designs Due to our excellent national and international supplier relationships, we are able to deliver standard fittings as well as numerous special designs. It is possible, for example, to deliver A 105 screw connections with a bronze-steel seat. Different thread types Screw connections can be supplied with the following threads: NPT thread according to ANSI B 16.11 BSP thread according to ANSI B 16.11 G thread according to DIN ISO 228 R thread according to DIN 2999 like BSP. Internal / external thread and SW ends All threads are available as internal / external threads (male / female). Furthermore, the screw connections can also be supplied with SW ends (socked weld). The combination of the different ends is also possible. Screw connections according to ANSI B 16.11 are always 3-part and have a metallic-conical seal.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PEEKCHINA CO., LTD.
China
PEEK Screws offer exceptional strength, chemical resistance, and high-temperature performance. Available in standard sizes or custom-made to your specifications, these screws are perfect for demanding applications in industries such as aerospace, medical, and engineering.
Request for a quoteSHENZHEN HONGSUN PRECISION TECHNOLOGY CO., LTD
China
The process is CNC turning. The finish is anodizing.
Request for a quoteBÜRKLE GMBH
Germany
Stainless steel barrel screw joint with a R 2" steel fine outer thread for tubes dia. 32 mm.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Screw-in resistance thermometer Pt1000
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Screw-in resistance thermometer NTC 10 kOhm
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Screw-in resistance thermometer Ni120
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Screw-in resistance thermometer NTC 10 kOhm
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Screw-in resistance thermometer Ni120
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.
Request for a quoteNORELEM FRANCE
France
Form C and F: Ball steel, ball seat high-carbon steel. Form G and J: Ball high-carbon steel, ball seat steel. Version: Form C and F: Ball hardened and black oxidised, ball seat phosphated. Form G and J: Ball phosphated, ball seat hardened and black oxidised. Note: The self-aligning pads serve as stops, rests and thrust pads in fixture construction. The seating face returns to the start position when the load is removed. Ball secured against rotation. Drawing reference: Form C: male thread, flattened ball, smooth Form F: male thread, flattened ball, diamond grip Form G: press fit, flattened ball, smooth Form J: press fit, flattened ball, diamond grip
Request for a quoteNORELEM FRANCE
France
Also called fixture clamps. The minimal height of this fixture clamp allows numerous clamping problems in fixture and equipment construction to be solved. The brass hex washer offers a gentle yet extremely stable and safe clamping of workpieces. By using several fixture clamps entire pallets can be set-up. “A” = distance from workpiece to screw centre (cam screw). On request: Replacement cam screws.
Request for a quoteNORELEM FRANCE
France
Material: Aluminium. Version: Bright. Flat seal asbestos-free. On request: Cap marked OIL. Drawing reference: 1) flat seal
Request for a quoteResults for
Screw it - Import exportNumber of results
765 ProductsCountries
Company type
Category