Scientific laboratory - Import export

The fact that the benches are wheeled and mobile in modular laboratory systems provides the advantage of easy access in a possible revision of electrical and water installations. Additionally, this feature provides great convenience during laboratory cleaning. Shelf Systems consist of service columns and a horizontal shelf with a service unit with the same physical properties. It is also a type of column made of sheet metal at various heights and a shelf system that is baked at 200 degrees after being coated with anti-acid epoxy paint. Service lines such as gas, water, and electricity coming from the service unit, ceiling, or floor are designed to be laid systematically. The front panels, on the other hand, are designed to move up and down independently of the body block, with the suspension system in front of the body block; main shut-off valves, electrical fuse boxes, switchgear, gas regulators, and similar breakers are mounted on these panels.

SHOE COVER Laminated non-woven fabric gr. 54 Personal protective equipment Category III For medical and professional use The stocking cover with leg has two elasticated straps at the calf and knee secure the device to personal clothing. The seams are internal and are reinforced. Health environment personnel: physicians - surgeons - nurses - ambulance workers - cleaners - sanitation workers workplace: Hospital/clinic - doctor's office - RSA - scientific laboratory professional environment: professional operators in general - cleaners and sanitizers funeral services - chemical laboratories

RAMOS RU120 basic compact Raman spectrometer is a standalone research instrument designed to perform spectral measurements with capabilities at the level of high-end systems. Spectrometer RAMOS RU120 has a rigid, moving parts free design that does not require adjustments, has both high sensitivity and high spectral resolution, and is equipped with a built-in single-mode laser. RAMOS RU120 can be equipped with Raman fiber optic probes. A wide range of capabilities, high reliability, and compact size allow using RAMOS RU120 for various scientific and industrial applications. The objects for complex research can be semiconductors, minerals, polymers, pharmaceutical and biological substances, coatings, and other materials. RAMOS RU120 spectrometer can be equipped with a built-in 532 nm or 785 nm laser. Other lasers are available on request. The most affordable price in the Research Class segment of instruments!

RAMOS RS120 compact Raman dual-channel spectrometer is a standalone research instrument designed to perform spectral measurements with capabilities at the level of high-end systems. Spectrometer RAMOS RS120 has a rigid, moving parts free design that does not require adjustments, has both high sensitivity and high spectral resolution, and can be equipped with one or two single-mode lasers 488/633 nm or 532/785 nm simultaneously. RAMOS RS120 can be equipped with Raman fiber optic probes. A wide range of capabilities, high reliability, and compact size allow using RAMOS RS120 for various scientific and industrial applications. The objects for complex research can be semiconductors, minerals, polymers, pharmaceutical and biological substances, coatings, and other materials. RAMOS RS120 spectrometer can be equipped with either built-in 532 nm or 785 nm laser or both lasers simultaneously. 488/633 nm lasers are available on request.

RAMOS U120 compact single-channel confocal Raman microscope is designed for micro spectral measurements with capabilities at the level of high-end systems. RAMOS U120 microscope has a rigid, moving parts free design that requires no adjustments, has both high sensitivity and high spatial resolution. A wide range of capabilities, high reliability, and compact size allow using RAMOS U120 for various scientific and industrial applications. Main features: - Research level optical microscope with advanced measurement techniques - Submicron resolution due to confocal design - Automatic adjustment of laser power - Wide dynamic range and extremely high sensitivity of innovative sCMOS detector - Edge or Notch filters for Stokes and AntiStokes spectroscopy - Automatic switching between Raman, optical and combined Raman-optical modes - Fiber optic Raman probe option - Raman mapping with motorized sample stage - Laser Safety Class 3B

NIOS Micro is a new device in the NIOS product line that is designed to perform Vickers microindentation in the scale range from HV 0.01 to HV 50. It is certified as a measuring instrument and can be used in scientific and industrial laboratories. The device implements algorithms for automatic application of indent arrays and measurement of indent boundaries, which allow performing various measurements depending on the tasks set, as well as determining the depths of surface hardening (SHD, Surface Hardering Depth), carburizing (CHD, Case Hardering Depth) and other characteristics. The design of NIOS Micro is built on the same modular principle as other NIOS hardness testers. If required, NIOS Micro can also be equipped with a nanoindentation module, maximizing the range of forces measured and applicable methods

The PC controlled, high sensitive elmor C3 Seed counter is preferably used in scientific counting tasks in laboratories Universities, research and breeding projects or in seed quality control etc. Parts that can be processed with the C3 seed counter are, for example: Dust fine plant seeds such as Arabidopsis thaliana or Begonia semperflorens Vegetable seeds, grains or seeds of ornamental plants Insects, pupae and eggs Small mechanical parts Pharmaceuticals Semiconductor chips etc. The C3 Counter is controlled solely via PC. Thus new solutions for the ever growing demands of the customers are possible. All settings and the results of all operations are logged and saved . This is an essential prerequisite for quality control and traceability of test results. The parts that can be counted with the C3 seed counter can be extremely small and irregularly shaped. Thus they are very difficult to handle manually. Dosing these parts with scales is often flawed or impossible. Therefore the use of the of C3 opens new options, since e.g. smallest parts in the sub-milligram range can be dosed faster and more accurately by counting than weighing the pieces. With additional software modules also further evaluations can be performed. These are currently: direct 1000 grain weight determination and the grain size analysis. Technical data Counts Parts from 0.1 to 18mm in diameter For spheres of 2mm diameter: Counting rate: 50’000 parts per hour Typical counting error: less than 1/1000 Runs under Windows XP/7/8.1 Free Serial Port (RS232) or USB needed Software included Totalizer Preset Counter Additional software available: Direct determination of the 1000 Kernel Weight Analysis of the size of the counted particles: Particle Size Analysis Conveyor bowls The parts to be counted are transported in a vibrating conveyor and are singularised by means of a sorting element. Both the conveyor bowl as well as the sorting element can be selected among different variants , depending on the properties of the product to be counted. A) Standard conveyor bowl made of anodised Aluminium with universal – sorting element FS0. FS0 is manually adjustable for all part sizes from 0.1 to 18 mm in diameter. B) Special sorting elements instead of FS0: FS1, manually adjustable, optimised for cereals, rice, paddy and products of similar shape and size FS2: manually adjustable, optimised for corn, soybeans, peas, beans and products with similar shape and size FS3: fine-drive adjustable in height and width, for very flat seeds or flat mechanical parts with the following dimensions: width: 0.5 to 10 mm, height: 0.5 – 8 mm, maximum length: 20 mm C) Special conveyor bowl with additional lateral opening for mechanically eliminating of accompanying substances, suitable for corn, cereals, soybean, paddy, etc. The height of this opening can be adjusted from 0 to 5 mm and allows unwanted accompanying substances laterally be sorted out. Not suitable for parts smaller than 1 mm in diameter. Can be used with sorting elements FS0, FS1, FS2, or FS3 combined. D) To meet the needs of various industries, the conveyor bowls can be made ​​of other materials . These bowls are for example extremely impact resistant or correspond to the rules of the FDA, etc. Such trays can be made ​​from various basic materials like Titanium, PEEK, Polyamide and others. E) The standard aluminum bowls can be treated or coated in order to satisfy specific requirements. With increased mechanical stress or when in contact with food, the surface can be hard anodized. A hard coating of nickel has a high surface hardness and is FDA approved, Polyurethane (PU) coating permits rapid transport of heavy mechanical parts and prevents noise and wear. Again, FDA approved materials can be used. F) Feeder Bowl with vertical outlet: Short cycle times are possible, as the seeds leave the bowl after a short run time. Advantageous when many different lots must be processed, often used for the fast 1000 grain weight measurement. Used for seeds which can be easily singularised like Crop, Soy, Corn, Canola etc. The seeds should have a diameter of 2 mm or more. Volume 0.8 litres, or about 2500 kernels of Corn. Automatic 1000 Grain Weight Measurement By means of an additional software module, an electronic balance and a special frame, the precision counter C3 can be used for the direct determination of the 1000 kernel weight of a sample. Both the C3 as well as a balance are connected with the control computer. A freely selectable quantity is counted and falls on the scale pan. At the end of the counting operation the weight of the sample and the corresponding number of particles is transmitted automatically to the PC, where the 1000 kernel weight is calculated. With the conventional 1000 grain weight determination, the number of items and the weight must be entered manually into a calculating machine. In many cases, exactly 500 or 1000 kernels are counted and weighed; and then the 1000 grain weight can be determined without no arithmetic exercise, but the danger exists that the result is falsified by separation effects during the operation of the vibrating conveyor (grain size selection). With the simultaneously determination of seed quantity and weight all potentially faulted manual inputs are eliminated. But most important is that in this procedure the particle size selection is impossible. If necessary the result can be printed out or processed electronically. Further the danger of the grain size selection can completely be avoided. Particle Size Analyzer The precision seed counter C3 can be used as particle size analyzer to determine the particle size distribution of a given sample by means of a special software module. The size of the singularised and free falling parts is measured in one dimension with a resolution of some 1/100 mm. This measurement is intended primarily to compare different samples qualitatively. With spherical parts the measurements give also quantitative information. The measured values of the particle size analyzer are stored as txt file. This makes it possible to further process the raw data individually by means of appropriate standard software. Filling Carousel The C3 parts counter can be combined with the elmor 780 carousel filler. The carousel filler allows semi automatic, to a large extent unsupervised filling of vials, tubes, small containers as well as bags from paper, glassine or composite material. Feeding Conveyor elmor 610 Feeding conveyor and storage hopper for automatic refilling of the conveyor bowls of our counting machines C1, C3 or CX elmor Green Design Our label for: high energy efficiency longevity no standby power loss most components may be recycled production without solvents, ROHS conformity Click here to add your own text Click here to add your own text

A scientific test station and laboratory unique in France are directly adjoined to the POITTEMILL and FORPLEX administrative offices. Discussions between the customers and our technical teams begin in the test centre along with the detailed analysis of their raw materials in order to obtain all the necessary information for a successful project outcome. The laboratory and test centre are fully equipped to respond to the requirements of our different customers in the fields of grinding, crushing and micronization of raw materials.

Petri dish produced by MOSLAB in a sterile environment and with 100% robotic system without human touch

Thermostatic and Climatic Chambers, Galli’s Original Equipments, for environmental simulation tests. Suitable for automotive, aeronautical, electronic, optical, semiconductor, biological, chemical and pharmaceutical industry. Ideal for environmental simulation testing, Genviro Climatic and Thermostatic Chambers provide the solution to your need to meet increasingly stringent International and Automotive standards. The Galli Test Chambers including the severe test requested by the Lithium Battery research, according to the EUCAR Levels of safey. You can choose a Genviro Climatic or a Thermostatic Chamber from various sizes, from compact 30L, 60L, 120 and 245L to larger 3300L volumes.

Temperature from -40°C up to +180°C Humidity from 10% up to 98% Illumination Dimmable illumination with optional lamps Configuration Volumes from 25 up to 1500 liters stillFACE Stability test performing controller revoFACE Dynamic performing programmer Shelves Included and variable in quantity according to the model Ventilation Forced ventilation fan Alarms High/Low temperature and humidity Electric Power 220-240V ~ /50 Hz different power available 100% customizable solution

Temperature from -25°C up to +70°C Configuration Volumes from 25 up to 2300 liters stillFACE Stability test performing controller revoFACE Dynamic performing programmer Shelves Included and variable in quantity according to the model Ventilation Forced ventilation fan Alarms High/Low temperature and humidity Electric Power 220-240V ~ /50 Hz different power available 100% Customizable solution

International proficiency tests availabel in english or Spanish for any partiicipant from all around the world. Frozen shipment available even with custom dispatch. Best rates and prices both for your participation and the shipping costs of your proficiency test participations. Participate in our accredited in ISO 17043 proficiency tests and let us help you show your analytical quality to your clients and interested parties.