Sandblasting machines - Import export

Steel construction, metal, etc. with a high production capacity. It is the type of sandblasting machine preferred by companies in the production sector. The conveyor system is designed as trolleys carrying hanger hooks on a linear line. Different conveyor types are preferred according to light and heavy materials.

Usually, marble, basalt, granite, etc. natural stones; It is a type of sandblasting machine used for aging, anti-slip, or decorative sandblasting. It is called a marble sandblasting machine because of the need for sandblasting of marble more commonly than other stones. It can be preferred without hesitation for sandblasting all-natural stones.

Pressure-blasting boilers that can be used as portable are a type of sandblasting machine that can be managed by an operator and can be conveniently kept by the operator in open areas. Portable sandblasting machines are capable of blasting with all kinds of granules and are controlled by a remote pneumatic trigger. It is preferred for sandblasting large parts, vehicles, and steel constructions. Although the portable sandblasting machines produced by BF BLAST operate at 6-8 bar, they are put into production after being tested with 22 bar pressure water and passing quality control.

It is a type of sandblasting machine in which the placed parts are sandblasted with the rotation of the horizontally positioned circular table. It is preferred for sandblasting medium-sized parts that are not suitable for hanging.

It is a type of sandblasting machine produced for the purpose of sandblasting the outer surface of pipes, tubes, shafts, and similar materials. The outer surface of the diameters of 20mm (1/2”) to 3048mm (120”) pipes can be sandblasted with a pipe blasting machine. You can contact our sales representatives for in-pipe sandblasting solutions. Pipe blasting machines are produced with different equipment according to the needs, and some standard dimensions are as follows:

The device is a rugged Industrial Equipment for industry and trade for marking large quantities. Our model "Professional" is working very effective, economical and requires only one low maintenance. It can be very fine lines to to 1.10 mm accuracy blasted. Furthermore, this machine works quietly and dust free. Technical specifications length 800 mm width 700 mm height about 850 mm (optional changeable) mass 120 kg Compressed air required 2-8 bar

3 sizes for marking of flat glass panes and Hollow glass bodies with logo's or lettering, max. 25,38 and 54 mm diameter! The device consists of in detail 1 tank made of sturdy steel plate, 6 liters. Contents, 3 feet, mounting bracket, lockable Fill cap for the blasting agent (corundum), and overpressure nozzle with filter element Needle felt (easy to replace). 1 special blasting gun with built-in injector nozzle, and venturi wide mouth – blasting nozzle and Compressed air connection nipples. 1 special distribution head for receiving the stencil, which are rapidly renewable, and the Recycling of the blasting agent in the container or in the filter element. 1 set = 4 pcs. Connecting hoses between blasting gun and containers or distribution head and the container.

The JUNIOR 40 is a very handy device for various applications. It works according to the suction system, in which the blasting agent is sucked in the nozzle head by the compressed air (injector effect). The blown abrasive is filled into the sand container for re-use via the built-in insert vibrating screen and fed to the blasting nozzle. Depending on the desired surface, all dry blasting agents can be used, such as slag abrasives, glass beads, corundum, silicon, glass grain, chilled sand, etc.

Our model "Super-Glasmatic" is particularly characterized by a compact, Compact design, simple operation, low material consumption, optimum use of space, highly effective dedusting, rational workmanship, environmentally friendly operation without dust pollution and adjustable material consumption. Housing with 2 mm steel plate, with complete blasting agent recovery, with drain cup for quickest change of blasting agent, with interior lighting of the blasting chamber, with brush slots at the front, approx. 600 mm long for optimum processing of the glass objects, with 3 brush slots on the side and at the top for problem-free penetration of the parts to be irradiated, With sliding blades at the sides for dust-tight closing of the booth during the blasting process, with standard beam head and spray gun with hand lever, with all necessary compressed air and blasting hoses, with large plexiglass door (750 x 400 mm) for optimum visibility Filter system (residual emission <5 mg / m³).

The Injektor 80 Power is a very handy device for various applications. It operates according to the suction system, in which the blasting agent is sucked in the nozzle head by the compressed air (injector effect). The blown abrasive is filled into the sand container for re-use via the built-in insert vibrating screen and fed to the blasting nozzle. Depending on the desired surface, all dry blasting agents can be used, such as slag abrasives, glass beads, corundum, silicon, glass grain, hard sand, etc

The AQUA BLAST wet blasting cabinet is a combination system for degreasing and simultaneous gentle beams of various workpieces. The water - jet mixture is housed in the cabin swamp. This abrasive mixture is sucked in via a novel centrifugal pump of wear-resistant polyurethane. At the jet of compressed air is additionally adjustable added so as to achieve an optimum surface finish. After loading of the workpiece, the blasting medium mixture flows back into the cabin sump and is thus an abrasive circuit ensured. Battered fine abrasive is suspended from the cab sump and fed to a band filter on the cabin back.

As an experienced manufacturer of sandblasting halls and facilities of blasting houses, we offer with our team, problem solutions tailored to your needs and individual case worked out. Price on request

We provide stainless steel sandblasting and grinding services to obtain smooth and clean metal surfaces. The stainless steel sandblasting procedure is environmentally friendly and highly efficient. For finishing metal surfaces, Profinox provides glass sandblasting services – a procedure that does not contaminate surfaces with iron. This consists in propelling glass granules in the form of a jet at very high speeds directly onto the surface of metal parts. As one of the most important aspects reflecting the quality of a product is the finish of the product itself, our stainless steel sandblasting service enables us to perform high-quality surface machining, as sandblasting with glass granules makes it possible to treat even the most difficult to penetrate areas and gives a clean and smooth look to the product. Another important function of stainless steel sandblasting is to significantly improve the final appearance

These parts are milled by aluminum,which used in architectural decoration industry.

Istanbul Dokum is an organization, has flexible production methods enable to cast, iron, nodular iron, steel, stainless steel, duplex, super duplex and bronze in sand molding system in a single foundry. Our foundry, as different from the hundreds of foundries across Turkey and Europe, complex is equipped to supply castings to customers. In our induction furnaces, your orders are casted carefully with our qualified personnel. Casting cleaning is carried out by a separate team within our structure and some parts are subjected to heat treatment in accordance with special demands. We apply heat treatment in order to achieve better mechanical values depending on the end use areas. Sandblasting is done in our 2500x2500x3500(h)mm inner dimensioned sandblasting machine with a single piece capacity of 10 tons.

CNC machining sandblasted silver anodized aluminum part

It is a type of sandblasting machine in which the sandblasting process is carried out with the turbines in a row on one side while being rotated by the automatic suspension system on the machine after it is placed in the hanger baskets on the workpiece. It is preferred in metal manufacturing sector and spare parts revision processes. The machine can be optimized in line with the needs and demands.

Preparing surfaces for painting/coating.

At all times you are able to conclude a maintenance contract with us for your cleaning machine or sandblasting cabins. Maintenance contracts are a guarantee for the smooth operation of your machine. By having regular maintenance unexpected machine failures and thus high costs are avoided. An additional advantage of such a maintenance contract is that the life of your machine increases considerably.