Safety valves - Import export

for cartridge with safety valve, see Usbeck article 1430

220 g / 400 ml, capacity 3 h, 70 % butane, 30 % propane

Our valves are manufactured in-house and matched to the characteristics and pressures of your application. Our valves are full lift safety valves and can be spring loaded or pilot operated. All our valves are supplied set to your required working pressure up to a maximum of 4,000 bar and flow rates up to 4,700 l/min. Two versions of spring-loaded safety valves, even ATEX compliant The simpler high pressure valves have a rotatable bypass connection to dispose of leaking fluid. Pilot operated valves require a block flange. Like all other KAMAT products, these are ATEX compliant and can be manufactured in special materials to suit the medium being pumped.

Compressor safety valve, rated at 200 PSI.

Brass 1/4 turn meter tap CW614 / 617 MAIN FEATURES - Brass body - Prison nut secured by a hole for sealing wire - HDPE side sealed by compression and secured by a hole for sealing wire - A.C.S. certified product

Brass 1/4 turn safety valve to standard NF EN 1216X Features - Angle or straight model (full passage) - Captive nut secured by a hole for sealing wire - Non-removable cylinder lock - Several colour-coded locks available - Watertight lock-cover plug with sealing hole - Operating temperature: 0°C to 90°C - Maximum working pressure: 16 bar - Minimum test pressure: 24 bar - A.C.S. certified product

3BAR safety valve M 6BAR safety valve M

Diaphragm Safety Relief Valve (M-F) DN15-DN25 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Type : Vertical Type / Max. Working Temp. : 120 ºC / Max. Working Pressure : 3,4,5,6,7,8,9,10 Bar *** Application Areas : Hot and Cold Water Systems

Brass Safety Valve (Straight & Corner) ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Straight - Corner Type / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Safety valve in accordance with CE standards ATEX certified Screw connection on the high-pressure side: 1/4" conduit pipe Target pressure: 50/80–4,500 bar 67,000 PSI Fixed venting connection: 1/4" NPT Temperature: -10°C + 250°C

The 5P diaphragm valve can be used in practical applications as a shut-off fitting, a safety valve and also in the 2/3-way version for distributing or collecting. The key to a long service life and reliability is in the structural design of the diaphragm valve. In comparison to comparison diaphragm valves, the flow is controlled not by the diaphragm alone, but in combination with a 90° sealing cone. The advantage of this is that it saves wear on the diaphragm and prevents particles from accumulating.

When operating pneumatic valves (diaphragm valves, etc.) special attention is placed on the protection of the control air system. The 5A compact safety valve reliably protects the control air system against media flowing back in case of leaks. The valve is automatic and therefore provides safety in the application.

Gas Heater Safety Valve,Gas Heater Safety Control gas oven gas Valve

Our modern turning machines with CNC controls of company “Mazak” can work details from all types of steels, crude iron and non-ferrous metals. The maximum diameter of working detail is 380 mm, at maximum length 1000 mm. The machines are equipped with devices for the filing of rods. Our products are intended for the automotive industry, machine building industry, construction and other industries. The main details which we produce are: Different types of nozzles for hydraulics and Pneumatics Parts of antivibration elements Turning details about safety pneumatic valves Details for machine building industry Axles and shafts, bushings Bearing units for agricultural machinery

Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket

Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket

Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket

Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket

Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket

Applications: Steel Industry / Industrial Combustion Technology / Renewable Energy Technology One-piece body, tight-closing, centric disc Design for mounting between flanges according to DIN EN 1092-1 or ASME B16.5 Face-to-face length according to DIN EN 558-1-R20. Leakage rate A according to DIN EN 12266-1. permissible operating pressure 5 bar For all gases according to DVGW worksheet G 260 Safety shut-off valve according to EN161 class A (closing time < 1s)

Applications: Industrial Combustion Technology / Steel Industry One-piece body, tight-closing, centric valve disc With blow-out proof shaft Version for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to manufacturer’s standard Leakage rate A according to DIN EN 12266-1 permissible operating pressure 2 bar For all flammable gases according to DVGW worksheet G 260, EN 437 and other neutral gases Safety shut-off valve according to EN161 class A Approval according to DIN EN IEC 61511, up to and including SIL 3

Applications:Steel Industry / Industrial Combustion Technology / Renewable Energy Technology One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 permissible operating pressure 10 bar, from DN 350 ≤ 1.5 bar For all flammable gases according to EN 437 and other neutral gases Safety shut-off valve according to EN161 class A (closing time < 1s) Approval according to DIN EN IEC 61511, up to and including SIL 3

Applications: Industrial Combustion Technology / Steel Industry One-piece body, tight-closing, centric disc Lug-type body for flanges according to DIN EN 1092-1 or ASME B16.5 Face-to-face length according to DIN EN 558-1-R20. Leakage rate A according to DIN EN 12266-1. permissible operating pressure 5 bar For all gases according to DVGW worksheet G 260 Safety shut-off valve according to EN161 class A (closing time < 1s)

for cartridge with safety valve, see Usbeck article 1430

for cartridge with safety valve, see Usbeck article 1430

for cartridge with safety valve, see Usbeck article 1430

for cartridge with safety valve, see Usbeck article 1430

Dual-stage, high-performance rotary vane pump with a pumping speed up to 22 m3/h With 3-phase motor With temperature sensor (Bimetal) for optimum motor protection Integrated gas ballast and HV safety valve For all low and medium vacuum applications Special feature, Various motor voltages for worldwide employment