Rotary switches - Import export

SMR 1-30 2 1

MRS 18 2 - 8 1 - 2

MRS 12 9 1

MRS 10 H 2 - 6 1 - 6

MR 2 - 12 1 - 4

Plastic Raw Material: Pa6.6 %25 CE Electrical Life: 10.000 Cycle Temperature Rise (Terminals) : Life Max. 55°K Flame Retardancy: UL94V0 Terminals: Brass6.3*0.8 mm Electrical Ratings: 10A / 16A 250VAC Temperature Rating: T125°C Glow Wire Test: 850°C Shaft Dimension: Ø6mm / mm

Plastic Raw Material: Pa6.6 %25 CE Electrical Life: 10.000 Cycle Temperature Rise (Terminals) : Life Max. 55°K Flame Retardancy: UL94V0 Terminals: Brass6.3*0.8 mm Electrical Ratings: 10A / 16A 250VAC Temperature Rating: T125°C Glow Wire Test: 850°C Shaft Dimension: Ø6mm /.mm

Large selection of manual directional control valves with different actuating elements. With lever at 90° / 45° or on the front. With adapter system for mushroom buttons, push buttons or rotary switches. Available in sizes 1/8 and 1/4 to 3/2, 5/2 and 5/3.

COMMERCIAL DEHUMIDIFIER TTK 350 SProfessional all-rounder for demanding drying operations Black and white combined in a powerful device. The TTK 350 S makes you stop thinking in terms of black and white or good and cheap. It is simply both combined in one device, allowing you to benefit from prices at a Far East level without compromising in terms of workmanship and reliability. For the quality of this dehumidifier is no accident – but traditional EU manufacturing. Not only the plastic-coated metal housing but also the stable carriage construction with bar handle and large transport wheels for maximum mobility demonstrate the dehumidifier's robust and durable design. The operating switch and the filling level warning light are protected from dust and spray water by a protective cap, and a slotted hygrostat rotary switch protects against inadvertent misadjustment of the switch position.

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

The cam-type limit switch is a device used to control the movement of industrial and construction machinery. Information is transmitted via the shaft actuating micro-switches. Standard range BFCN: Gear ratio from 7.5 to 550 Number of cams from 2 to 5 Maximum rotation speed: 500 rpm IP55 Range BFRS: Gear ratio from 10 to 200 Number of cams 2 or 4 Maximum rotational speed: 500 rpm IP55 Options for both ranges: potentiometer, gear wheels, couplings, mounting flange, various cams The micro-switches are either deflection type or with positive opening. The choice between different types of cams allows to modify the reaction curve of the limit switches. On request, specific versions: Up to 12 cams Protection IP66 / 67 /69K Integrated potentiometer or encoder ATEX zone 2 and 21

Bulk flat flexible cables flexlink® are made with flat conductors insulated with polyester film for any application where space reduction and flexibility are the most important criteria. Bulk flat flexible cables are compatible with the most commonly used crimp contacts. They are flexible and allows for space saving. They are made with 1.27 mm and 2.54 mm pitch flat copper conductors insulated with polyester films. They can be used in consumer electronics (printers, computers, …), automotive (switch rotary connectors, headliners, door panels, …)

More comfort! More air! Better view! Unlimited clear view of your workspace, filtered and clear air with adjustable air distribution make the clearmaxx the unique face and respiratory protection system with the highest safety level. Adjustable air distribution: A rotary switch can be used to feed 20% of the air cooling the forehead area. Direct air draft crossing the eyes leading to dry eyes is avoided by the air distribution system. Multi function system Combining it with the optrel e3000 PAPR system with mountain breeze filter the clearmaxx becomes the perfect buddy on countless types of work. The easy-to-change DIN5 front cover lens expands the system to the perfect protector for efficient plasma cutting. Wearing comfort Thanks to a minimized weight of only 330 g (PAPR version: 495 g) and an ergonomic fit the clearmaxx sets new benchmarks in wearing comfort.

With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads).

Very small installation depth: < 20 mm Without claws. With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. With manually adjustable operating mode: trailing / leading edge control. With adjustable minimum/maximum brightness. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (leading edge control) Nominal power: 2 - 400 W/VA (trailing edge control)

SMR 7000-1/8000-1 7.5x7.5

DRS 7000/8000 7.5x7.5

SMR 15000/16000 7.4X7.4

DRS 15000/16000 7.4X7.4

SMR 13000/14000 7.2x7.2

DRS 13000/14000 7.2x7.2

DRS 20

Input power range: 110-240V AC Output voltage: 48V DC Output power: max 120W Light Intensity Control: using a rotary switch, the following brightness levels can be set: 3% 10% 100% Can be controlled manually or as an option automatically from a twilight dimming controller

Moisture meter Name: Kil-Mo-Trol monitoring system Material: Lumber, Wood, Timber, Hard wood, Soft wood Calibrations: Wood Overview Track wood drying progress - Pinpoint problem areas in the kiln - Determine end-point for shutdown Ideal for dehumidification kilns and small drying operations, KIL-MO-TROL® lets you monitor the moisture content of lumber during the drying process. With testing stations at each lumber package and a rotary switch box in your control room, you can quickly get an overall view of your progress. Proven for both hardwood and softwood drying, the KIL-MO-TROL can be used in any type of dry kiln, pre-dryer, or airdrying operation. Your Benefits: It’s as easy as mounting your rotary station selector switch, running main cables out of the control room, installing pins and load cables at each station, and connecting the main and load cables. Then connect a Delmhorst moisture meter to the station selector and start taking readings! Click here to learn more abou

The Rotary Selector Valve or RSV, is a small bore multiport, multibank rotary poppet system suitable at pressures ranging –1 +10 Bar, Fluid Temperature 85°C (185°F) . It is a relatively simple & therefore extremely reliable unit, based on a modular design & as such configurable for a multitude of applications. It is custom built from stock parts. The body is manufactured in brass or stainless steel, both having stainless spindles & they can have stems and seals in differing materials to suit the media being used. Each bank of the valve is pneumatically independent but linked by a common central spindle, enabling separate air paths to be controlled concurrently; each output is effectively a valve. The RSV (once also known as the PIV or Pneumatic Interlok Valve) can incorporate an integral electrical rotary switch which allows fluid & electrical circuits to be controlled simultaneously or can be used simply to provide positional indication remotely at the control centre.

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 - 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. Setting the address, baud rate or terminating resistances is not necessary. A name, which is stored in the absolute encoder's non-volatile memory, is assigned via the PROFINET controller to address the device.

Robust aluminium case - Stainless steel shaft, Ø 10f7 shaft with flat (9 -0.1 mm), RS bearing with NILOS ring - Potted housing for IP 69K protection - Electrical connection via 2 sensor plugs (M12 plug, 5-pin, pins) for bus 1 and bus 2. One hex rotary coding switch each for setting the address under the blind plug

The economical Soliswitch FTE20 is a paddle switch for point level detection in bulk materials. Its robust polymer housing and compact design makes it an ideal sensor for full, empty and demand alarm in applications with bulk solids. The optimized polymers make the unit outstandingly robust and therefore suitable for use in dust explosive areas according the latest standards.

PSD 48 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus communication permits higher velocities at lower torques. The PSD can be easily addressed by rotary switches (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. The optional rotatable attachment housing allows you to attach the direct drives to the machine in any position, no angle plugs are required.