Rotary compressors - Import export

Oxidation resistant compressor oils (polyglycol/ester) with low evaporation loss. They prevent specifically thermal decomposition and deposits in rotary vane compressors. Not miscible with mineral or PAO oils.

Fully synthetic high-temperature compressor oil based on ester oil with additives for application temperatures up to 220 °C. Especially suitable for reciprocating and rotary vane compressors.

TTK 175 S COMMERCIAL DEHUMIDIFIERPowerful drying technology at the top of the game... The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype. All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites. Wheel it in and watch it work – powerful rotary compressor technology in a robust carriage design Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs.

TTK 355 S COMMERCIAL DEHUMIDIFIERThe new value-for-money leader in the 70 litre class Reduce high levels of relative humidity in minimum time or easily keep large rooms dry – the TTK 355 S is in its element, this is what it was made for. This becomes possible because of a clever combination of a strong 1.27 kW rotary compressor and a quality fan for air flow rates of up to 1,000 m³/h. Thanks to the high air circulation, the tuned heat exchange system is always able to feed extreme humidity from the ambient air for quick drying. Up to 70 litres of humidity can be removed from the room air per day with just one TTK 355 S in this manner. At the same time, compared with other defrost systems, the high-quality hot gas automatic defrost of the TTK 355 S guarantees a much more efficient dehumidification performance without defrost pauses on a time interval during which no dehumidification occurs.

The TTK 380 ECO is the first dehumidifier choice for the smart shopper looking for a budget-friendly, yet commercially applicable dehumidifier with professional performance characteristics.The ECO concept of this dehumidifier series by Trotec facilitates both: By focussing on the essentials the TTK 380 ECO takes a pass on unnecessary decorative accessories in favour of more advantageous properties for non-destructive continuous dry keeping and dehumidification operations. Behind the robust steel construction in carriage design, a powerful rotary piston compressor ensures a high dehumidification performance. And combined with its professional hot gas defrost system the TTK 380 ECO can impress with a high drying capacity even at low room temperatures.

COMMERCIAL DEHUMIDIFIER TTK 75 ECOEasily (sup)portable investment for dehumidification and dry keeping The TTK 75 ECO, compact and robust in equal measure, is a pragmatic solution when an equally low-cost and high-quality construction dryer is required. The lightest device of the TTK-ECO series is equipped with cable holders and a retractable metal carrying handle and can so be conveniently transported to the operating site. Thanks to its efficient rotary piston compressor, the low-maintenance device can be transported and stored in any position. And since the TTK 75 ECO comes with a hardwearing steel construction, a rough construction site environment means no harm to this dehumidifier. Once arrived at the target location, the TTK 75 ECO is simply switched on and you're done. It immediately withdraws immense amounts of moisture from the room air – and thanks to the automatic hot gas defrosting even does so at low temperatures in unheated rooms.

In heating mode 1, it has a capacity of 12.30kW and an efficiency of COP 4.50 at 35°C hot water output at 0°C water supply. In heating mode 2, it has a capacity of 16.50kW and an efficiency of COP 5.84 at 35°C hot water output at 10°C water supply. Capacity 12kW Circulation Pump Built-in Compressor: BLDC Twin Rotary Operating Modes: Heating-Hot Water Mixing Valves: Internal Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 710/710/1020 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 9kW and an efficiency of COP 4.71 at 35°C hot water output at 0°C water supply. In heating mode 2, it has a capacity of 12kW and an efficiency of COP 6.15 at 35°C hot water output at 10°C water supply. Capacity 9kW Circulation Pump Built-in Compressor: BLDC Twin Rotary Operating Modes: Heating-Hot Water Mixing Valves: Internal Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 710/710/1020 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 6.96kW and an efficiency of COP 4.60 at 35°C hot water output at 0°C water supply. In heating mode 2, it has a capacity of 9.50kW and an efficiency of COP 6.05 at 35°C hot water output at 10°C water supply. Capacity 7kW Circulation Pump Built-in Compressor: BLDC Twin Rotary Operating Modes: Heating-Hot Water Mixing Valves: Internal Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 710/710/1020 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

In heating mode 1, it has a capacity of 5.20kW and efficiency of COP 4.50 at 35°C hot water output at 0°C water supply. In heating mode 2, it has a capacity of 6.90kW and an efficiency of COP 5.80 at 35°C hot water output at 10°C water supply. Capacity 5kW Circulation Pump Built-in Compressor: BLDC Twin Rotary Operating Modes: Heating-Hot Water Mixing Valves: Internal Power Supply: 380V Refrigerant: R410A Product Dimensions W/D/Y: 710/710/1020 Areas of Use Hotel Designed to be integrated into pool heating systems. House: Designed to be integrated into residential plumbing systems. Greenhouse: Designed to be integrated into fancoil systems. Building: Designed to be integrated into underfloor heating systems.

Mikropor ""Conwrap"" Separators are standard wrapped style separators. Theseseparators are designed for outside to inside flow and can be used with all oil injectionRotary Vane and Rotary Screw Compressors. Conwrap separators operate between1 to 60 m³/min flow rate at 7 bar with 1 to 3 mg/m³ oil carry over.

Our COMPRESSOR OILS stand as premium lubricants, designed to meet the needs of a wide range of air compressors, including rotary vane and screw air compressors. They are equally suitable for reciprocating air compressors that call for oils within this viscosity range. These exceptional COMPRESSOR OILS are crafted from top-grade paraffinic base oils, ensuring outstanding performance. They come fully equipped with corrosion, oxidation, and foam prevention inhibitors, offering comprehensive protection. Importantly, our COMPRESSOR OILS are Zinc Free, meeting modern environmental and performance standards.

DC inverter Heat Pump, with the advanced DC inverter and EVI technology, can save you 80% heating cost compare with the traditional heating device like gas/fuel boiler and electrical heater. It heats fast and works perfectly with the radiator and floor heater to provide you a comfortable living environment even in very cold winter. It is one of the best heating devices available today. Main Features 1) Twin rotary compressor with inverter control – DC inverter technology control the heat pump output according to the household's energy requirements. Low waste of the power! 2) Electronic Expansion Value allows the accurate refrigerant go through under different working conditions. 3) Intelligent controller and LCD displaying. 4) Safely operation with multi-protections. 5) Auto defrosting function. 6) Hydrophilic coating air exchanger and plate heat exchanger all available. OPTIONAL: R410a, R22, R407c refrigerant is available.

Classical systems of the screw compressor have a regulated air cooling of the lubricating oil, which means that the excess heat is discharged into the ambient by the fan. In this way, the heat is completely lost. External heat recovery unit AirWatt is designed to efficiently exploit the waste heat, generated during compression of air in rotary screw compressors. Sometimes this represents more than 70% of the energy consumed by the rotary screw compressor for the operation. This heat can then be used to heat domestic water or for heating, at almost no additional costs. This does not only help save money but is also environmentally friendly. The unit has two separate piping systems with counterflow. Energy exchange from a compressor to sanitary water occurs in a plate heat exchanger, where compressor oil and sanitary water meets. The unit is controlled by a thermostatic valve, which prevents the compressor system from getting too cold and damaging the compressor.

DC inverter Heat Pump, with the advanced DC inverter and EVI technology, can save you 80% heating cost compare with the traditional heating device like gas/fuel boiler and electrical heater. It heats fast and works perfectly with the radiator and floor heater to provide you a comfortable living environment even in very cold winter. It is one of the best heating devices available today. Main Features 1) Twin rotary compressor with inverter control – DC inverter technology control the heat pump output according to the household's energy requirements. Low waste of the power! 2) Electronic Expansion Value allows the accurate refrigerant go through under different working conditions. 3) Intelligent controller and LCD displaying. 4) Safely operation with multi-protections. 5) Auto defrosting function. 6) Hydrophilic coating air exchanger and plate heat exchanger all available. OPTIONAL: R410a, R22, R407c refrigerant is available.

Feeding of filtered-out materials to silo systems over long distances (up to 700 m). Pneumatic medium-pressure conveyor systems For the conveying of filtered-out materials such as wooden splinters and wood dust or for the conveying of products in the derived timber products industry with large conveying quantities over great distances. Pneumatic medium-pressure conveyor systems are economical, reliable and enable flexible adaptations to individual conveying routes. The conveying air stream is generated by a rotary piston compressor. As opposed to fans, these have almost vertical characteristic curves; i.e. the volumetric flow rate remains almost constant as the pressure in the conveying system increases. This ensures safe material transport. Special cellular wheel sluices are necessary for channelling the conveying material into the conveying stream, such as knife gates for derived timber products. Cyclones, filters or combinations of the two are used to separate the conveying material from the conveying stream. The economical conveying lengths lie between around 150 and 750 m. The loading of the conveying stream can amount to up to 5 kg/m³ and essentially depends on the grain size, density and form of the material to be conveyed.

Synthetic automatic transmission fluid Dexron III G Cadaoil Gearbox ATF III G is a synthetic automatic transmission fluid, especially developed for new (after 1997) and older (automatic) transmissions build by Ford and GM, as well as for many other brands. It is also suitable for power steering systems, some hydraulic systems and for rotary air compressors where an excellent low temperature fluidity is required. Gearbox ATF III G has a very high viscosity index and offers resistance against corrosion and foam building. It also has good anti oxidation and anti-wear properties. Gearbox ATF III G has an extremely low pour point which allows easy gear shifting at cold starts. Seals are not affected by this ATF. The Dexron III G specification differs from DEXRON III F by adding two extra tests. An 'electronically controlled converter clutch (ECCC) test' and a 'sprag wear test', by which

Proven in over 30 years of field operation, Waukee brand compressors are designed to be easy to maintain and service. This means that downtime is kept to a minimum. Features include simple design with few moving parts, rotary vane constructions, and built-in automatic closed-circuit unloader in which gas not needed is recirculated within the compressor. (Depending on pressure and flow rates, a bypass regulator may be used instead.) The 6-vane rotor is supported at both ends by factory sealed and lubricated ball bearings. Operation is relatively quiet. There are no gears, springs, or metal contacts. The low-friction vanes slide in and out of the rotor slots centrifugally. Capacity: The Waukee Rotary Vane Compressors can be provided from 200 cfh (5.6 cm/h) to 8,000 cfh (226 cm/h) at pressures up to 3 psig (20.68 kPa) on standard models.

Gas Mixing Panels include the Waukee brand rotary vane compressors, air and gas Flo-Meters, and either a mechanical carburetor or RatioProver for precise ratio control. Panels are available with additive trim gas or air Flo-Meters. FEATURES: • Available with Lubed Vanes (includes a set of Phenolic Vanes and an Auto Lubricating System) or Non-Lubed Vanes (includes a set of Long Life Composite Vanes) • Available with outlet pressures ranging from 0.5-5.0psig. For higher pressures, consult UPC. • Two options available for ratio control: Standard Carburetor, RatioProver • Available with output capacities ranging from 200-12,000CFH • Available with Built-in Unloader for pressures between 0.5-2.5psig or with Bypass Relief Regulator for pressure lower than 0.5psig or higher than 2.5psig • Available with Standard turndown of 2:1 or 10:1 when used with a Compressor Pressure Controller • Includes Gas and Air Flo-Meters and Air Filter • Available with Trim Gas or Air Flo-Meters

High-pressure reciprocating air compressors, rotary compressors and turbocompressors.

Rotary and reciprocating air compressors.

Rotary screw-type air compressors.

Rotary screw-type air compressors.

Lubrication of rotary compressors of LPG hydrocarbon gases or liquefied natural gases LNG such as: - methane, ethane, ethylene, propane, propylene, butane, butylene, butadiene, as well as chemical gases such as: - ammonia, vinyl chloride monomer. Lubrication of refrigerating compressors using LPG gases as refrigerant fluid, in the oil and petrochemical industries (refinery, drilling platform, recompression post, liquification plant).

Rotary Vane air compressors and vacuum pumps are used in thousands of applications worldwide. Available in oilless, lubricated, motor-mounted, and separate drive styles, they offer a wide choice of capabilities.

AIRKOM promises suitable, trouble-free and high performance for every kind of application with its ESC series oil-injected rotary screw air compressors. Manufacturing and assembly of every single part of these compressors, in which latest engineering software is used during design and analysis phases, is realized considering international quality standards. EASE OF USE ESC series compressors are manufactured to be employed different areas of application without any performance loss. High performance and quality grade parts used in manufacturing and assembly of these products which are designed to make users in every level of experience easily adapt and learn, provide long maintenance periods and thus, low operating costs as a result. WIDESPREAD AFTER-SALES SUPPORT SERVICE As having operations in more than 100 countries around the globe and possessing more than 150 authorized dealers in Turkey,

AIRKOM promises suitable, trouble-free and high performance for every kind of application with its ESC series oil-injected rotary screw air compressors. Manufacturing and assembly of every single part of these compressors, in which latest engineering software is used during design and analysis phases, is realized considering international quality standards. EASE OF USE ESC series compressors are manufactured to be employed different areas of application without any performance loss. High performance and quality grade parts used in manufacturing and assembly of these products which are designed to make users in every level of experience easily adapt and learn, provide long maintenance periods and thus, low operating costs as a result.