Rod seals - Import export

Design of the housing in the form of a groove should be avoided if possible. If this is not feasible, good housing and seal cleanability must be guaranteed. The hygienic design requirements can be met by having a particularly large groove base radius, avoiding notches and having a split housing. For WIP/WOP cleaning it is important to be able to remove and replace the seal without damaging it. Given a suitable machine design, cleaning in place is also possible.

The main applications are liquids at very high pressure. This seal can also be used for gases if the maximum operating parameters are restricted.

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy.The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

These sliding rings are the solution for designs which only allow room for a small or low housing, but require an operating pressure up to 80 Mpa. They are ideal for retrofitting into existing O‑ring grooves

The tandem configuration of type 116 allows static pressure maintenance in the critical unpressurized range and at low pressure. The security of this function is guaranteed by use of the IDG materials U95, U96 or U99 on the low pressure or atmospheric side.

BORSIG offers development, production and reconditioning of compressor parts, as well as their reconditioning and modification. Our product program comprises plate vales, ring valves, piston rod seals and oil scraper packings.

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

The waterproof linear actuator is designed by sealing rod and gearbox sealing. Power Jack Motion water resistance class can be IP66. High quality on high level waterproof performance.

At Superior Tube we commonly use zirconium-based alloys to manufacture nuclear reactor components such as control rods and cladding, coolant channels, seal tubes and other equipment intended for use in a radioactive environment. Zirconium alloys have low neutron absorption, high strength and high corrosion resistance under different operating conditions. Compared to stainless steels, zirconium tubing is desirable because of its texture. The metal has a high yield strength and is more resistant to irradiation creep and stress corrosion cracking. Superior Tube can manufacture precision tubes in the following Zirconium alloys Please note that we have a minimum order value of £10,000.

The NASH 2BE5 was developed from the proven NASH 2BE3 and 2BE4 compressors, whose reliable performance has been further improved. The development focused on optimizing performance, higher vacuum capabilities and ease of maintenance. NASH 2BE5 Benefits include: improved efficiency higher vacuum levels (to 100 mbar abs / 3" Hg abs) built-in ECO-FLO™ water saving technology with patent pending gas scavenging drop in replacement for 2BE3 and 2BE4 removable bearing brackets for easier maintenance elimination of tie rods, resulting in improved sealing due to bolted casing joints polyisoprene lining The footprint and connections to the NASH 2BE5 models are identical to its predecessors, the NASH 2BE3 and 2BE4. Therefore, exchanging or upgrading to the more efficient NASH 2BE5 requires no site modifications. The NASH 2BE5 model is available in cast iron, with stainless steel coming soon. The 2BE5 is perfect for use in mining, filter applications, paper mills, power plants, chemical plants, refineries and more.

The NASH 2BE5 was developed from the proven NASH 2BE3 and 2BE4 pumps, whose reliable performance has been further improved. The development focused on optimizing performance, higher vacuum capabilities and ease of maintenance. NASH 2BE5 Benefits include: improved efficiency higher vacuum levels (to 100 mbar abs / 3" Hg abs) built-in ECO-FLO™ water saving technology with patent pending gas scavenging drop in replacement for 2BE3 and 2BE4 removable bearing brackets for easier maintenance elimination of tie rods, resulting in improved sealing due to bolted casing joints polyisoprene lining The footprint and connections to the NASH 2BE5 models are identical to its predecessors, the NASH 2BE3 and 2BE4. Therefore, exchanging or upgrading to the more efficient NASH 2BE5 requires no site modifications. The NASH 2BE5 model is available in cast iron, with stainless steel coming soon. The 2BE5 is perfect for use in mining, filter applications, paper mills, power plants, chemical plants, refineries and more.

The Modellrange ECONOMIC is made of durable sheet steel. It comes with adjustable media consumption, a blast media collection bin and a sieve to separate blast media from contaminations. The cabinet has two lateral openings with sealing sliders for rod materials. A perforated metal plate with enforcements. The system has a sectional door that opens the complete workspace. The Cabinet comes with a door-safety switch, two large operation holes with multiple rubber Sealings. Monitoring window, sized 400x500 mm, with easy changeable glass/safety-glass panes, as well as 2 durable pneumatic springs. Energy Saving Lamp, attached from outside. Injector-type blast head, with air- and blast nozzle made of hardened steel. The system comes with all necessary compressed air and blast media hoses, oil-water separator, manometer, an electrical magnet valve and a foot switch. On/Off switch, dust filter system 0,55 kW, intermediate pressure turbine. Dust collection bag.