Results for
ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Release agent H1 (art. no. 9519000) is used to release patterns and moulds. Release agent H1 is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a release film is formed.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA release wax (art. no. 9516000) is used to release patterns and moulds. ALWA release wax is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a polishable release film is formed.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA release spray (art. no. 9515000) is used to release patterns and moulds. After the solvent has evaporated, a strong release film is formed. ALWA release spray may not be polished.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
ALWA release lacquer (art. no. 9510000) is used to release patterns and moulds. ALWA release lacquer is applied in a thin coat with a brush or a sponge. A thin coat of ALWA release lacquer can also be sprayed on with a conventional spray gun. We recommend to spray on approx. 2 to 3 layers. After approx. 20 min. a strong release film is formed. The drying process can be accelerated by hot air.
Request for a quoteDEKORTECH GMBH
Germany
Heat transfer films for easy to peel heat transfers. ✔ Easy peel ✔ High-gloss finish ✔ Great price ✔ Thermally stabilized ✔ Hot or cold peel! Our release film SHIELD SR is created to be used with toner based printing technologies. The 23um thick PET film is coated with our unique SHIELD SR release coating, which add gloss and protection to your prints. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after application or to peel it with a delay. The SR version is designed as an all-rounder, combining good resistance against cremes, water and mechanical damage. The standard core size is a 6'' core with a film length of 3000m per roll. Custom rolls can be made.
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts.
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
Wax release agents can be produced in a wide variety of compositions and qualities. These industrial products are typically used as release layers in boat building, as shoe soles, bumpers, dashboards or as PU-foam. You can find detailed information about our range of products on the website www.oskars.biz
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
100% No: 1 Grade Carnauba Base. OSKAR'S M-700, especially formulated for easier application to polyester- and epoxy moulds. Highly heat-resistant. Provides outstanding mould protection and easy release of finished parts. Formulated to prevent wax build-up. Silicone free.
Request for a quoteTRIBO-CHEMIE GMBH
Germany
Highly recommended for large and thin-walled Mg castings Temperature Range 160 °C to 400 °C Alloy Al, Mg Properties and Advantages • extreme release power • no build-up • bright castings
Request for a quoteTRIBO-CHEMIE GMBH
Germany
Release agent for Mg structural parts with low tolerances Temperature Range 160 °C bis 400 °C Alloy Mg, Al Properties and Advantages • good adhesion and film formation properties even at high temperatures • formation of a thin release film
Request for a quoteTRIBO-CHEMIE GMBH
Germany
Release agent based on 25 years of product development Temperature Range 150 °C bis 380 °C Alloy Al, Mg, Zn Properties and Advantages • high process reliability due to extremely stable micro-emulsion • excellent release effect, bright castings • parts perform unproblematically in joining processes
Request for a quoteTRIBO-CHEMIE GMBH
Germany
General purpose release agent, suitable for a wide range of castings including large and heavy as well as structural parts Temperature Range 160 °C to 400 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • strong release power • no build-up • bright castings • castings can be welded, painted and powder coated
Request for a quoteTRIBO-CHEMIE GMBH
Germany
Tried and tested release agent, which is qualified for glueing and welding of structural castings Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • approved for glueing, welding, painting and powder coating • no build-up • die wetting already at lower temperatures
Request for a quoteTRIBO-CHEMIE GMBH
Germany
Water-based special release agents in various concentrations for low volume spray application Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • castings are particularly suitable for the "bonding and welding" joining processes • products can be further diluted • effective reduction of "metallization" (metal-to-metal bonding) • exceptional release effect with good lubrication of ejectors and slides
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Quickrelease couplings for water pipes, oil lines, brake and clutch lines. The quickrelease couplings are always used when a very fast installation and removal of services is required. Areas of application are motorsport and aviation.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RHEIN-CHEMOTECHNIK GMBH
Germany
Special release agent for production boards made of wood and plastic1) during concrete block finishing. (1) impact assessment possibly required.) Significantly reduced the adhesion of coating materials, protects the production board, softens excess coating residues making clean-up easier, environmentally friendly, since it is biodegradable.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Special release agent for wooden, plastic or steel boards in concrete products manufacturing with subsequent application of polymer sealers or coatings. Significantly reduces sticking of sealers or coatings on the boards, easier cleaning of the boards from polymer residues.
Request for a quoteALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH
Germany
Master patterns must be treated with ALWA surface tension remover (art. no. 9500000), so that the ALWA release lacquer does not roll off. ALWA surface tension remover is applied in a thin coat with a brush or a sponge. After approx. 10 min. the solvent is evaporated and ALWA release lacquer can be applied.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Available as water-dilutable concentrate or as ready-to-use emulsion based on renewable raw materials for wood shuttering and for wooden or plastic boards in concrete products manufacturing. Economic in use, easy and fast demoulding, uniform and smooth surfaces, biodegradable, based on renewable raw-materials.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Release emulsion for wood shuttering and production boards in concrete paving stone production. Fast and easy demoulding, economic in use, readily biodegradable.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Release agent based on natural raw materials, free from mineral oils and solvents, readily biodegradable. Easy demoulding, economical in use, readily biodegradable, for fair-faced concrete.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Heavy-duty release agent for highgrade fair-faced concrete. Excellent demoulding, results in clean and uniform surface, prevents pore formation to a large extent, high-grade rust prevention, economical in use.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Heavy-duty release agent with excellent adhesion on vertical moulds, e.g. for precast garages. Very good adhesion on vertical moulds, excellent demoulding, results in clean, uniform and almost flawless fair-faced concrete, economical in use.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Release agent for foundry-, injection- and blow- moulding as well as for extrusion of plastics and elastomers Against sticking of glues and sealing materials or wetting by water Sliding film against noise causing rubbing of plastics, elastomers and metals with each other For easy permeation of plastic and elastomer profiles, e.g. in windows and doors For the lubrication of cutting edges in paper, cardboard, veneer and textile machines Advantages and benefits High efficiency by distinctive surface wetting. Separation film with antistatic properties Manifold application for a long time lubrication, protection, maintenance and impregnation in a wide temperature range Minimal consumption caused by formation of extremely thin films
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Proved, versatile release agent for moulds of wood, coated boards, steel and plastic. Sticks excellent on moulds, easy and clean mould release, for high-quality surface finish.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
demoulding of pipe sockets and spigot ends, manholes, etc. Easy demoulding, economical in use, biodegradable.
Request for a quoteRHEIN-CHEMOTECHNIK GMBH
Germany
Release agent for instant demoulding of pipes, manholes, etc. Easy demoulding, economical in use, biodegradable.
Request for a quoteResults for
Release - Import exportNumber of results
139 ProductsCountries
Company type
Category