Results for
SFA ENVIRO
France
This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the membrane. PUSHCART manufactured in Stainless Steel and complete with the following Storage box in HDPE PVDF lined dosing pump Flexible delivery hose 25m in pvc (reinforced with polyester fibres) Spray nozzle in stainless steel
Request for a quoteB*BATI
Spain
Single-component, thixotropic, fast-setting mortar, reinforced with polymer fibres. It has compensated shrinkage and has high mechanical strength and adhesion. It incorporates corrosion inhibitors.
Request for a quoteB*BATI
Spain
Self-levelling mortar based on cement, reinforced with fibres, modified by additives that give it the ability to be fluid and pumpable, especially intended for screeds and levelling of coverings with a thickness between 5 mm and 50 mm, which, once hardened, must be covered with coverings. USES Applicable on concrete or cement mortar supports. On supports with low porosity, apply a Fixmar Primer GR bonding primer beforehand. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of covering, such as parquet, carpet, ceramic, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing product for synthetic coverings.
Request for a quoteP.J. PRAUSE DUROTEC GMBH
Germany
S-Ply® is a glass-fibre composite material that is suitable for the highest dynamic requirements. The load carrying and supporting material is a strictly parallel-orientated, non-woven, glass- or carbon-fibre laminate (UD-prepregnated). The glass-fibres are not stretched and not bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesive to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all the benefits offered by the raw materials selected to form the composite material. The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has g
Request for a quoteP.J. PRAUSE DUROTEC GMBH
Germany
S-Ply® is the registered name for composite leaf springs that are manufactured by Prause Durotec. The reinforcing material has a strictly parallel-oriented, non-interlaced glass or carbon fibre structure. The fibres are neither pre-stretched nor bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure. Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesion to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all of the benefits offered by the raw materials selected to form the composite material. The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress. In addition, it has good load carrying and transmissio
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ADFIL
Belgium
Durus S500 is proving increasingly popular with designers, contractors and project owners. This synthetic macro-fibre has shown to be a valid alternative to conventional steel fibre reinforcement. With no need to change existing designs, a concrete mix using steel fibres can be replaced by a mix containing Durus S500 macro fibres. The workability will remain unchanged and often even be improved. Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved.
Request for a quoteMALVIN SRL
Italy
Pre-mixed screed, 3 mm grit, damp earth type, fibre-reinforced with stainless amorphous metallic fibres, with high thermal conductivity, based on hydraulic binders, compensated shrinkage with rapid drying and controlled curing, ideal for Realization by hand or machine, also pressure pump, of background screed to be applied directly on any internal surface as long as it is stable and not subject to capillary ascent. Package: Bulk in silo-25 kg sacks-70 sacks-17.50 QL footboards RH Drying < 2%: 4 days Usage: Internal Color: Grey Particle size: ≤ 3 mm Yield: 18/20 kg/mq per cm thickness depending on the degree of comping Thermal conductivity EN 13813: λ = 2.03 W/MK Minimum application thickness Anchored screed cm 3 Float Screed cm 4 Screed on floor heating cm 3 above the ashlar Float screed on insulating mats > 6 mm cm 5 Compression resistance at 28 days EN 23892-2: ≥ 20 N/mm ² (C20)
Request for a quoteMALVIN SRL
Italy
Pre-mixed plaster, conforming to the minimum environmental criteria CAM. fibre-reinforced with polypropylene fibres, based on hydraulic binders, expanded polystyrene beads and light mineral aggregates with High thermal insulation. for the realization of plasters with thermal insulating undercoats certified in internal and external and/or thermal protection on beams and pillars in reinforced concrete, for mechanical and manual application. Use as Intofin Flex or Intoras flex finish. Packaging: 50 Lt Sacks-55 sacks Footboards Usage: Indoor/outdoor Color: Grey Particle size: ≤ 5 mm Yield: 1 bag for 1 sqm thickness 4 cm Vapour resistance coefficient EN 1015-19: μ = 9 Capillary water absorption EN 1015-18: Class "W1" Certified Thermal conductivity: λ = 0.07 W/MK * Specific weight dry mortar: 350kg/M Minimum recycled/Recovered quantity: ≤ 10% * Certification: Politecnico di Bari certificate n ° 93/870 Complies with minimum environmental criteria (CAM) DM 11 october 2017 Point 2.4.2.
Request for a quoteKALTHOFF LUFTFILTER UND FILTERMEDIEN GMBH
Germany
filter media of elastic, progressivelystructured nonwoven glass or synthetic fibres reinforcing grid on clean air side glassfibre media with adhesives, germicidal effect spare filter for existing rolltape filter systems
Request for a quoteOCV ITALIA
Italy
SE4818 Low Odor is specifically designed for excellent processing and handling for LFT (long fiber reinforced thermoplastic) & CFRT (continuous fiber reinforced thermoplastics) PP applications where low odor is required. LOW ODOR VERIFIED SE4818 Low Odor has been proven to meet low odor requirements per OEM test standards for automotive interior composite parts. Test methods include VDA270 German Association of the Automotive Industry, PV3900 Volkswagen SAE standards and testing and the Geely Low Odor test method Q/JLY J1770528D. EXCELLENT PROCESSING No catenary and low fuzz promotes superior processing, enabling higher efficiencies and lower manufacturing costs with less downtime for cleanup. SUPERIOR COMPOSITE STRENGTH Compared to other reinforcements on the market, SE4818 Low Odor offers superior composite tensile , flexural and Impact performance. Providing maximum part strength and long part service life.
Request for a quoteOCV ITALIA
Italy
Telestrand™ Flex roving offers a compelling solution for impregnated glass fiber reinforcement (IGFR) used as peripheral reinforcement. It is produced with patented Advantex® corrosionresistant ECR glass by Owens Corning and is available in 600 Tex to 2400 Tex. EXCELLENT PROCESSING Excellent strand integrity with higher LOI. Fast curing helps in running at higher speed. Smooth runout combined with low fuzz properties. ENHANCED PRODUCTIVITY Available in 32 kg doff size. Reduced coating – lower consumption of chemicals for coating. Reduction in wastage and downtime. Helps to increase line speed. Labeling Each individual package is labeled with information including product name, Tex/yield, production plant, production date, and weight (*Taloja). Storage It is recommended to store glass fiber products in a cool, dry area.
Request for a quoteWESTMARK GMBH
Germany
• from high quality PPA, glass fiber reinforced • ideal for coated pots and pans • heat resistant up to 270°C / 518° F
Request for a quoteResults for
Reinforced fibres - Import exportNumber of results
14 ProductsCompany type
Category