Records - Import export

The Logtag UHADO-16 Temperature And Humidity Recorder measures and monitors temperature and humidity during transport and storage. The Logtag UHADO-16 Temperature And Humidity Recorder measures and logs up to 16,000 temperature and humidity measurements

PLEXTALK is a registered trademark of Shinano Kenshi Co. Ltd. The brand name includes digital audiobook players and recorders that we develop and produce for the blind, visually impaired, and the visually impaired. PLEXTALK offers people with vision or reading disabilities better access to the world of reading by providing them with audible book players and recorders that comply with the DAISY standard. Shinano Kenshi Co. Ltd. develops and manufactures a variety of auxiliary products that allow blind, visually and read-disabled people to participate actively in society and to lead an independent lifestyle. The products, available under the PLEXTALK brand name, are already being used by many blind, partially sighted and physically disabled people, including librarians, volunteer translators, book authors / publishers, students, teachers, senior citizens, rehabilitation centers and social care workers around the world.

WEYTEC IP Grabber Cards capture video and audio content as well as keyboard and mouse interactions. The data is converted to IP streams which are recorded over standard network infrastructure. The IP Grabber cards are deployed in between the source and the input or output device, and can be installed either at the source (in the system room) or at the desk. They do not interfere with existing hardware or software. At a glance KVM recording of keyboard, video, mouse, audio and serial data streams Hardwarebased, no software installations Video Grabber available with DVI (VGA) and DisplayPort Data Grabber supporting PS2 & USB or serial & audio Video resolutions up to 4K@60Hz Digital transmission (standard IP) Interface modules for copper and fiber networks Lossless encoding technology

The acoustic vocal cabinet is an acoustical material that must be absolutely designed in the studio. It can be produced in different sizes to play drums or even become a big music room. Thus, when music is made, you will be able to make your own hobbies an area where you can block the noises that can go around. Acoustic cabins are covered with acoustic sponges and panels to provide sound acoustics. Acoustic vocal pods echoes the sounds that are echoed to ensure sound balance. You can set different styles with the models you want. Acoustic vocal cabinet can be produced in special sizes and thickness. For every kinds

The high-accuracy LEO-Record digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery.

Sound insulation of the sound recording room is done to improve the quality of sounds inside the room by preventing outside noise from entering. This allows recorded music, podcasts, radio programs or other audio work to be recorded with better quality and clarity. The combination of methods we apply ensures better sound insulation of the recording room. Sound recording room acoustic sound insulation improves the quality of recorded sounds and ensures that outside noise is reduced as much as possible.

NFL Record Message Button Recordable Music Button Voice Recorder Button

Custom Funny Sound Voice Music Melody Talking Recording Easy Button with Custom Sound and Logo for Gifts and Promotion

Instruction: 1.Turn on the “PHOTO” switch and open the photo album cover to insert the desired photo. 2. Open the battery door and insert a 2*AAA battery. 3. Slide the “RECORDING” switch to the ON position, press the REC button, press and hold the button (about 2 seconds) to hear the “bi” sound,record a message of10seconds or less.When you're done ,release the button. A double "beep-beep" signifies a successful recording. For best results, Keep the audio source about 20cm from the mic. 4. Slide the “RECORDING” switch to the OFF position, press the PLAY button briefly, it will playback.presstwice, it will stop playing, and the third time you press the button, it can repeat the sound. Use attention 1. When the sound effect is small, please replace the battery. 2. After the recorded, please turn the “RECORDING” switch to OFF to avoid accidentally pressing REC during recording to delete the original recorded file.

New birth baby voice recordable photo frame FEATURE 1. Record and permanently reserve the first cry of a newborn, or baby's laughter and babbles. 2. Reserve newborn baby's information, handprints, foodprints, photos etc. 3. Save the pregnancy examination documents of the newborn (such as: doctor test list, B-mode ultrasonography, birth certificate, etc.), you can lock these "secrets" in the storage box ,and they will grow together with the newborn. 4. With power-off protection function, the recorded sound will not be erased when the battery is replaced. 5. With bracket, can either stand on desk or hang on the wall.

The Recovib.Tiny is a 3-axis shock & vibration data logger. It is extremely practical for a vibration diagnosis, offering up to 6 hours of measurement. Its wireless technology and intuitive operation provides substantial time savings in the performance of your measurements. It is the only type of vibration and shock recorder that allows several sensors to be used simultaneously in a synchronized manner enabling the performance of modal analyses and operational deflection shape analyses on large structures such as bridges or Walkways. It is able to record 1024 acceleration values (shocks and vibrations) per channel per second. The RECOVIB Tiny is the smallest, lightest and the most robust recorder on the market that is able to perform recordings in extreme conditions ranging from -10°C to +50°C. It is also dust and watertight to IP65.

Knight Optical offer a range of Stock Achromatic Doublet Lenses for use within Holography. Holography can be said to be a photographic recording of a light field, like an audio recording. This recording is typically 3 dimensional and does not require the use of any special equipment e.g. glasses or headset to view. These images are produced using laser light which are passed through a recording medium which “records” the depth an arrangement of the final image. Achromatic Doublets are used in holographic systems & correct for chromatic aberrations which exist in singlet lenses. This is when different wavelengths of light refract at different rates. The doublet lens helps to correct this by facilitating the focusing of the light to the same point. In holographic systems the aim is to form an image which is as close to real life as possible. Therefore, it is critical for the image to be as clear as possible and free from distortions and aberrations. Read PDF for more info

Very elagant design with LCD display. Well suited to being in bed, office and home

Power-displayed TWS earbuds

The recording of operating data such as flow volumes, pumping pressure, operating hours and power consumption of the pumps etc. is essential for the state monitoring of – usually municipal – pumping stations and pressure line as well as for the diagnosis of machine components. Data recording system with LCD display for the electronic acquisition, display, recording, evaluation, remote transmission and archiving of up to 6 analogue and digital input signals. Product features For daily, monthly, annual evaluation; meter statuses, operating times and volumes; min., max. and mean value recording Multi-colour display, digital, bar chart and graph representation Archiving in the internal memory and on compact flash card (no data lost in the event of a power failure!) Remote data transmission via standardised interfaces Suitable for door installation in the AWAcontrol control cabinet

The DCX-22 data loggers achieve greater measurement accuracy than loggers with a smaller diameter. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The data logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The high-accuracy LEO-Record-Ei digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery. Intrinsically safe – suitable for use in explosive atmospheres.

The remote data transmission unit ARC1-Tube with logger function is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The remote data transmission unit ARC1-Box with logger function is encased in a robust, water-tight aluminium housing. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The remote data transmission unit ADT1-Box is encased in a robust, water-tight plastic housing. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.

The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.

The series 21DC RFID combines the digital and extremely robust D-line pressure transmitters and data logger electronics with an RFID interface. The built-in battery has a lifespan of 5 to 10 years. The pressure and temperature values are each saved as a pair of numbers in the memory. Instantaneous values and saved data can still be read if the battery is flat, because power is supplied by the reader.

The remote data transmission unit ARC1-Box-SB with logger function is equipped with safety barriers and, in combination with intrinsically safe transmitters, it is suitable for use in hazardous applications. The unit is encased in a robust, water-tight aluminium housing. It records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The LEO5 digital manometers combine a range of functions from other KELLER manometers in a water-tight stainless steel housing. They can detect pressure peaks with a measurement interval of 5 kHz and record all measurements. Current measured values and saved data can be read out via the USB connection. The pressure values can be shown on the extra-large display in a wide range of units of pressure, which are either pre-programmed or configured by the user.

The DCX-22AA-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. They compensate for the air pressure using an additional, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The DCX-22-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The DCX-38 data loggers are designed for water level measurements with a high resolution in the mbar range. They can detect water levels with a total error band of just 1 mm (measuring range 0,5 m water column, compensated temperature range -10...40 °C). Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, converted into fill levels or other units, and exported.