Quick couplings - Import export

— plug-in coding: round, triangular, hexagon, octagon — Fool-proof coding — 1.4404 (316L) / 1.4571 (316Ti) stainless steel — Seals: low temperature -50°C to 200°C (red) FDA — working pressure 0,5 bis 10 bar — With shut-off function — Suitable for compressed air

We supply IBK folding clamp couplings in brass, stainless steel, aluminium and PP. Our couplings have proved their worth under hard conditions in steel works and are regarded as standard. Material: - Couplings made of brass - Seals made of NBR (optionally of EPDM or Viton) - Clamp made of stainless steel Attribute: - Vacuum sealed for suction lines - No danger of icing - Interchangeable with systems of the same kind (MIL C-27450) - Suitable for closing male and female parts Temperature: - Working temperature from – 40°C to + 120°C, for higher temperature inquire suitable seal Pressure: - Max. 16 Bar working pressure –> Safety Factor 4 - Vacuum – 0,8 Bar Benefits of these couplings 1. perfect flow 2. No eddies form in the flow 3. the nozzles cannot fall out 4. the shells cannot slide about. 5. Precise fl ow control, impact-resistant, nonrusting 6. firm fit Special models on request! The dimensions stated are approximations. Subject to technical alterations

FRENCH PROFILE QUICK COUPLINGS for water connections

PNEUMATIC QUICK COUPLINGS for pneumatic connections

PNEUMATIC QUICK COUPLINGS for pneumatic connections

EUROPEAN PROFILE QUICK COUPLINGS for water or pneumatic connections

Quick Released Connector Camlock Quick Camlock Coupling in Aluminum and Stainless Steel Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We are proud of our core competence in industry leading production processes, spectrometer analysis, critical NDT and tight tolerance machining. Our most experienced fields are in mechanical products (including parts) for applications in marine, agricultural equipment, automotive industry, railways, oil exploration, mining, construction and aluminum smelting equipment. With many years of experience, we learned the rules and we know the expectations of customers and have become part of their competitive strategy for success in their respective field.

Quickrelease couplings for water pipes, oil lines, brake and clutch lines. The quickrelease couplings are always used when a very fast installation and removal of services is required. Areas of application are motorsport and aviation.

Leveling of the boom by manual hydraulic pump: Mini height: 900 mm -Maximum height: 1600 mm Hot-dip galvanized structure, non-slip slatted running surface 2 Tie-down chains, Quick coupling hook for movement via forklift fork, ramp mounted on flexible solid tires, side castors height 350 mm Slopes: Mini: 9.00% - Maxi: 15.5% Applications: Specially designed for outdoor use on mixed terrain, its use on uneven surfaces such as dirt, gravel, damaged soils will be very efficient Loading / Unloading of Flatbed or Tautliner type trucks, wagons, containers maritime.

Leveling of the boom by manual hydraulic pump: Mini height: 900 mm -Maximum height: 1600 mm Hot-dip galvanized structure, non-slip slatted running surface 2 Tie-down chains, Quick coupling hook for movement via forklift fork, ramp mounted on flexible solid tires, side castors height 350 mm Slopes: Mini: 9.00% - Maxi: 15.5% Applications: Specially designed for outdoor use on mixed terrain, its use on uneven surfaces such as dirt, gravel, damaged soils will be very efficient Loading / Unloading of Flatbed or Tautliner type trucks, wagons, containers maritime.

Hot-dip galvanized structure, non-slip slatted running surface 2 Tie-down chains, Quick coupling hook for movement via forklift fork, ramp mounted on flexible solid tires, side castors height 350 mm Slopes: Mini: 9.00% - Maxi: 15.5% Applications: Specially designed for outdoor use on mixed terrain, its use on uneven surfaces such as dirt, gravel, damaged soils will be very efficient Loading / Unloading of Flatbed or Tautliner type trucks, wagons, containers maritime.

Hot-dip galvanized structure, non-slip slatted running surface 2 Tie-down chains, Quick coupling hook for movement via forklift fork, ramp mounted on flexible solid tires, side castors height 350 mm Slopes: Mini: 9.00% - Maxi: 15.5% Applications: Specially designed for outdoor use on mixed terrain, its use on uneven surfaces such as dirt, gravel, damaged soils will be very efficient Loading / Unloading of Flatbed or Tautliner type trucks, wagons, containers maritime.

DVK 6 pipe couplings with quick closure accelerate mounting in suction conveying with constant safety. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever Additionally DVK-6 pipe couplings with quick closure offer the following characteristics: double secured massive aluminium clamps screws M 8 with massive threaded bars very easy to mount due to circular version black natural rubber gasket (-20°C to +60°C) white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe optionally available with silicone gasket (temperature-resistant from -60°C to +200°C)

Drum clamp to be installed on the forks of the forklift. The clamp is made of a sturdy steel frame and fork mounted with a forklift, the locking is ensured by two screws and a chain with safety catch that prevents the clamp from sliding off the forks. The coupling and release system of the drum is automatic and the operator must not get off the forklift. It is sufficient to bring the clamp close to the drum and lift. Closing of the clamp is favored by the weight of the drum; to unhook it, simply place the drum on the floor. The clamp cannot be used to handle empty drums. The clamp is suitable for 210 lt metal drums with a diameter of about mm. 580. The pliers can also lift plastic drums with edges but only of the type that can be seen in the picture.

DVK-HD® quick closure pipe couplings are ideal for a quick and safe mounting in pressure conveyors. The coupling is closed with two clamping levers, therefore a quick opening and closing of pipe connections is possible. The clamping lever can be locked in any desired position by a simple upward pull.

In contrast to DVK-6 quick closure pipe couplings, DVK-6 Fix pipe couplings only the upper area of the slit coupling is closed with a clamping lever. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever. double secured massive aluminium clamps very easy to mount due to circular version white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe black natural rubber gasket (-20°C to +60°C)

Quick click-shut coupling (QuickLock) without threads, no lubrication or elaborate screwing required Fast rod insertion and removal Approximately 40 % quicker installation than screwed rods Absolute stable connection Works around offset pipe bends and joints Minimal deformations Made from one piece of steel Rigid, low wear, as no clamping jaws required No slipping back of the bursting rods due to elastic pulling forces Bursting rod system with practical bursting rod accessories

A pail liquid weighing filling machine is a type of equipment used in the packaging industry to accurately fill liquid products, such as chemicals, lubricants, and food ingredients, into pails or containers. This machine uses a weighing mechanism to ensure that the desired amount of product is delivered to each container. Application It is application for Food and chemical industries,quantitative filling of coating, solvent, chemical raw material Features: The system uses PLC, touch screen, safe and reliable Filling nozzle and pipe use quick coupling, convenient for removing and washing Automatic 2-shift filling with high accuracy The nozzle automatically lifts when reaching the target filling amount Gross or net filling mode is available Be able to set and store 30 groups of formula for use Free to set target filling amount in order to be convenient for different packing Filling with one button, easy to operate (manual operation mode available)

WATER SEPARATOR WA 4I MULTIQUBEWater separator WA 4i for combination with MultiQube insulation layer dryers The new WA 4i is provided with an integrated micro filter system with low-maintenance magnetic lock filter compartment to take in micro filter cartridges with a threefold filter element. This makes the WA 4i a versatile integral solution with all pre-HEPA filter stages in only one device. Advantage: improved flow-optimized filter technology, quicker setup, decreased material and space requirements – no separate additional micro filter housings required. With respect to insulation drying of surfaces sized up to 40 m², no other model is quite fit to hold a candle to this separator, for despite its ultra-compact dimensions the WA 4i comes fully equipped with numerous practice-oriented detailed solutions, such as a construction yet easier to maintain, TTKwic quick couplings, cable holder, residual water drainage and much more.

The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 1,5 m hose and hand nozzle. Product attributes: - Connection motor and pump via quick-action coupling - Sealless in the liquid area - Small outer tube diameter - Holding hook for hand nozzles at the pump discharge - Low weight Benefits: - Motor easy to remove - Several pumps can be operated in series with one motor - Also suitable for filling smaller quantities - Can transfer from narrow-necked and containers difficult to access - Minimal force required to change drums - Hand nozzle always quickly at hand due to holding hook - Low storage space required

Foam spray systems, for direct connection to high pressure washing equipment, for dense, highly effective foam without the need for separate low pressure equipment. Foam lances with and without quick coupling, for quick and efficient connection to the high pressure machine via the rear segment of the gun. Double lance system with injector and stainless steel dosing valve, which allows, using the same equipment connected to high pressure, spraying foam with one lance and rinsing at high pressure with the other lance.

The GRS geared agitator is equipped with a helical geared drive suited for a wide range of applications thanks to shaft lengths of up to 2,000 mm and drive ratings of up to 7.5 kW. The GRS series agitators have a standard output speed of 10 to 500 rpm. The shaft mounting options available include sleeve coupling, flange coupling, quick-change coupling or precision-change coupling. The agitator shafts are balanced for concentric run after assembly of the mixer. Upon request, we supply the GRS series with frequency controlled drive. Depending on the specific mixing task, the GRS can be supplied with matching mixing elements and various seals. Type test certificate for explosive zone 0.

GRS – Geared agitator with helical geared drive The GRS geared agitator is equipped with a helical geared drive suited for a wide range of applications thanks to shaft lengths of up to 2,000 mm and drive ratings of up to 7.5 kW. The GRS series agitators have a standard output speed of 10 to 500 rpm. The shaft mounting options available include sleeve coupling, flange coupling, quick-change coupling or precision-change coupling. The agitator shafts are balanced for concentric run after assembly of the mixer. Upon request, we supply the GRS series with frequency controlled drive. Depending on the specific mixing task, the GRS can be supplied with matching mixing elements and various seals. Type test certificate for explosive zone 0.

WIDE COMPATIBILITY — R134A refrigerant recharging hcse kit fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with highly working performance. m PREMIUM QUALITY — R134A can tap, R134A low side quick coupler are made of aluminium alloy, mini split adapter fitting is made of brass altoy for high heat resistance durability and safety. m EASY INSTALLATION — Push & lock coupler with auto shut off, easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge. m DIMENSION — 1/2" female x 1/4" SAE male can tap opener, 59'length recharge hcse, 13mm R134A Low Pressure quick couple, 2.7' length gauge, R410A mini split adapter with 5/16" SAE female x 1/4’ SAE male thread. PACKAGE INCLUDES —- R134A air conditioning refrigerant charging hose with gauge. 1Pc R134A can opener, and R134A quick coupler. 1/4’’ SAE M to 5/16*F R410A Straight Adapter.

No service needed because of contact-less data acquisition Frequency modulation and strain gauge principle cause high accuracy Ordinary power supply High interference rejection because of amplified active signal Quick-release coupling Short form, especially suitable for automatic screwing machines Measurement, adjustment and examination without removing the screwing tool Suitable for permanent use (even with higher speed) Suitable for clockwise and counter-clockwise measurement hexagonal drive very short construction 6 torque range from ± 0 - 2 Nm to ± 0 - 20 Nm rotation angle measurement option

The direct driven agitator SPR is Geppert Ruhrtechnik’s solution for all industrial mixing tasks that demand a turbulent mixing with high peripheral speeds. It is driven by a three-phase-motor with poles between 2 and 8 as well as drive ratings between 0.25 kW and 75.0 kW. The SPR could also be equipped with a frequency inverter upon request (up to 7.5 kW). The agitator shaft is directly connected at the shaft journal of the drive via sleeve or flange coupling. Solutions with quick-change or precisions-change coupling are also feasible for lower drive ratings of up to 3.0 kW. The standard agitator element is a propeller. Other mixing elements according to the mixing task upon request. The SPR can be mounted as a stationary unit or – at a weight of up to 25 kg – it can also be mounted directly onto the open tank via a vessel clamp Up to motor size 112, all SPR series agitators can also be provided with reinforced shaft. Type test certificate numbers for zone 0 (category 1).

SPR - Standard-propeller-agitator The direct driven agitator SPR is Geppert Rührtechnik’s solution for all industrial mixing tasks that demand a turbulent mixing with high peripheral speeds. It is driven by a three-phase-motor with poles between 2 and 8 as well as drive ratings between 0.25 kW and 75.0 kW. The SPR could also be equipped with a frequency inverter upon request (up to 7.5 kW). The agitator shaft is directly connected at the shaft journal of the drive via sleeve or flange coupling. Solutions with quick-change or precisions-change coupling are also feasible for lower drive ratings of up to 3.0 kW. The standard agitator element is a propeller. Other mixing elements according to the mixing task upon request. The SPR can be mounted as a stationary unit or – at a weight of up to 25 kg – it can also be mounted directly onto the open tank via a vessel clamp Up to motor size 112, all SPR series agitators can also be provided with reinforced shaft. Type test certificate...

The 0.8 m AGER Capinadeira is a machine designed to facilitate the work of cleaning green areas. Constructed with 4 mm sheet metal and reinforced longitudinally and transversely, it is capable of withstanding the harshest conditions. In addition, it has a fuse cardan included to increase the safety of the equipment. The differential is bathed in oil which allows a reduction in friction and an increase in performance, the chain curtain in the front and rear guarantees greater safety and efficiency in the work. In order to be able to adjust the height according to the terrain and work to be carried out, the AGER weeding machine has skids with height adjustment and a movable head , for greater precision and efficiency in the work. Fuse gimbal included Differential in oil bath Chain curtain front and rear Height-adjustable skates movable head quick chain coupling

Reliable CNC Turning Parts China Source Factory Prices Ming Xiao Manufacturing Co., Ltd engaged in customize turned parts more than 20 years,after years of upgrading, it has now been equipped more than 100 sets various processing machines, some are advanced precision processing equipment. As a professional CNC turning parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turning parts,Copper & Brass turning parts,Aluminum Turning Parts & Machined parts. Such as tube coupling, hose coupling, shaft,Axis,pipe joint parts,hose connectors & transition connectors,copper machined tube, flange,bushing, Sleeve,knighthead,pedestal,Piston Rod,insert long pin, Dowel Pin,Drive Pin & Rod,ball head bolt,long rod machined parts,long thread tube parts,nonstandard thread bolt & nut,Extension Rod, etc. We custom metal turning Parts for all industries, provide precision CNC machining services,welcome contact us to discuss about your projects. sales@mxmparts.