Production of accumulators - Import export

It ensures the classification of the ground product in a clean and orderly manner, thanks to the freely swinging body and the crates of different sizes in each passage within the body. After being sieved and homogeneously separated, the product in various proportions is automatically directed to the outlet channel through the channels in the frame, the channels between the frame and the channels in the main chassis, and is discharged outside the outlet pipes through control pipes. The surfaces of the cases are covered with formica. The outer covers of the passage are insulated, thus preventing flour particles from leaking out. The product enters the first case as one or two batches from the entrance above the passage and flows along the passage height of all cases. By placing spacers between the frames of the main frames, the product output volume increases, accumulation

EL GRIP transfers the cup from the outlet of an FFS machine to the downstream equipment. The flow of cups is fully controlled, and the products never accumulate, allowing the transfer of complex cups. Smooth cup pick-up and placement maintains the product integrity.

ACCUMULATION ROTATING TABLE IN STAINLESS STEEL AISI 304 The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The stainless tables are available with rotating table diameter from mm. 800 to 1400 mm and exist in concave or convex version (ideal for bags and products that are accumulated) and flat (ideal for bottles, cans and products that can spill). The tables are supplied with adjustable feet up to 40 mm. On request it is possible to have wheels with brakes. Edges and sides stainless steel version The flat stainless steel version is equipped with containment rod while the concave tables do not have containment systems as the products accumulate in the center. The models in flat version can be equipped with double-rod containment, closed side with height 50 cm, exit slide, load system for incoming products

This bottle unscrambler is a dynamic worktable with frequency control. The machine is used as a buffer platform applying for intermediate junction of assembly line to reduce the length of conveyor. Both the range of bottle and the speed can be adjusted freely, which is benefit for the production. Its procedure: put bottles onto round turntable, then turntable rotate to poke bottles onto conveying belt. Rotary turntables can dramatically improve the efficiency of your production. Loading turntables assist operators with feeding round containers to your filler. This creates sufficient backlog that enables your filler to run at maximum production capacity. Accumulation turntables promote more efficient packing of finished goods into shipping cases. NPACK turntables are made of durable 304 stainless steel for durability in your production environment. They can be customized to suit particular applications by adding bottle-guide railing options and half moon off-loading tables.

The LIST KneaderReactor Technology fills the gab and successfully combines the benefits of conventional process equipment, e.g.… Extruder Thin-Film Reactor Continuous Stirred-Tank Reactor (CSTR) Rotary Disc Reactor …with many other process characteristics which are unique for LIST. It provides an exceptional toolbox for developing new innovative and economical products and processes helping our customers to stay up to date with process technology. Your benefits Effective self-cleaning to minimize dead zones, product accumulation and product degradation Excellent kneading and mixing for better homogenization Effective heat transfer High surface renewal efficiency Large free vapour volume Precise and uniform temperature control due to large heat transfer areas Continuous or batch processing Process intensification Processing of sticky and highly viscous products Residence time is independent from agitator speed Wide and flexible range of average residence times Wide turndown...

CDA's Ninon 1500/2500 is an automatic labelling machine designed for applying up to four labels to a wide array of cylindrical products, including bottles, jars, buckets, cans, tins, and vials. Tailored for medium and large-scale productions, the Ninon 1500/2500 employs a timing system to ensure swift, precise, and efficient product labelling, achieving speeds of up to 50 products per minute. The inclusion of a product accumulation table at the conveyor exit enhances operator convenience. Versatile in its applications, the Ninon 1500/2500 can be used independently or integrated after an automatic filler or capper. It seamlessly fits into complete packaging lines.

Accumulator, the transfer machine is a device that plays an important role in the production processes of toilet paper and kitchen towel rolls, increasing the efficiency of production lines. This equipment automates the storage, sorting and dispatching of rolls, ensuring that the production process is uninterrupted and orderly. This device which is widely used in modern toilet paper production facilities, significantly increases the efficiency of the production line and product quality. The Roll/Log Accumulator is a device that transfers the produced rolls of toilet paper or kitchen towels to the next unit and regulates the flow in the production process. This accumulator is designed to prevent possible disruptions in the production line and to ensure a continuous production flow. It facilitates the organised processing and packaging of the rolls in the production process and allows the glue to dry before the rolls are cut to the desired size.

Wire Belt’s innovative line of Clean-Sweep™ sprockets are specifically designed to deflect the amount of product buildup accumulated on your conveyor’s drive. This means that there is less of a chance for product loss & carryout, belt skipping due to product buildup, and belt breakage due to incorrect contact with the sprocket teeth. Clean-Sweep™ sprocket’s tooth chamfer is machined to reduce drive friction and can lengthen belt life.

Wire Belt’s innovative line of Clean-Sweep™ sprockets are specifically designed to deflect the amount of product buildup accumulated on your conveyor’s drive. This means that there is less of a chance for product loss & carryout, belt skipping due to product buildup, and belt breakage due to incorrect contact with the sprocket teeth. Clean-Sweep™ sprocket’s tooth chamfer is machined to reduce drive friction and can lengthen belt life.

Coating sheets for a better grip, better product release or accumulation applications. BEHAbelt cover sheets made of TPU with excellent welding properties for your individual covering of vbelt, timing belt and other belt styles.

The Gronemeyer accumulation table can store large quantities of glasses, bottles or tins. The products are pushed to the accumulation table if there is backlog. The products are later re-fed into production by operating the system in reverse. The machine works according to the First In-Last Out principle. In case of malfunction, the electrical control system activates the accumulation table based on sensor messages. After the malfunction ends, the stored products are automatically fed into the line. Technical data: —Chain width: up to 3,000 mm —Usable chain length: up to 20 m —Independent electrical control system Optional equipment: —Complete machine cover made of Makrolon with maintenance doors —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

FLEXON LBP chains are flat top chains fitted with a number of small rollers, allowing the gentle movement of particularly sensitive or fragile products on accumulation belts. Highlights - Consistently high breaking strength - Very low backline pressure for optimum product accumulation - Extremely low noise level - Wear-resistant roller material - Secure attachment of shafts prevents jumping and damage to the accumulation rollers

RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. Efficient production processes and reliable execution of the overall implementation are characteristic for RAFI Eltec. As a result of our many years of experience in energy measurement technology and in radio and network applications, we have accumulated unique production and testing expertise. This is also naturally to your advantage in regard to the final assembly of your devices. Final assembly - Assembly presses and screw fittings - Ultrasonic welding - Adhesive robots - Semi-automatic and fully automatic assembly - Automated testing - Laser or inkjet printing technologies - Leak tests - Box build You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process.