Process projects - Import export

It has wide usage opportunities in all areas where engine use is intense, such as production lines, factories, smart buildings, treatment facilities, pump stations. Our panels are designed considering the ease of operation and maintenance of MCC, with standards-compliant solutions for production lines and control that require process control. Our project support, the solutions we produce for control systems with conventional or "process controllers", our knowledge and experience are an important privilege we offer to our customers. Using the right equipment or system in the right place and our complete solutions made with quality equipment are part of our tradition of achieving important criteria such as operational safety and investment efficiency for the benefit of the end user.

We design, manufacture and install entertainment areas that will attract the attention of children, develop their creativity and enable them to socialize! We create climbing walls, ball pools, tunnels, racing tracks, art workshops and pleasant areas for entertainment centers special to our customers' projects. We integrate quality materials with ergonomic designs and creative ideas. If you want to get information about our company-specific project and production processes, contact us, let's open the door of a completely different world!

We design, manufacture and install theme park entertainment areas that will attract children's attention, develop their creativity and socialize! We create climbing walls, ball pools, tunnels, race tracks, art workshops and enjoyable areas for our customers' theme park projects. We integrate quality material with ergonomic designs and creative ideas. If you want to get information about our special project and production processes for your company, contact us and we will open the door to a completely different world for you!

CTRA studies and proposes technical solutions for the transfer of all fluids over long distances, combining chemical compatibility with mechanical and abrasive resistance to ensure a long service life without routine maintenance. The reference project carried out by CTRA in 2006 on behalf of OCP Morocco, which involved the construction of two Ø1800 phosphogypsum discharge lines with a total length of 8km, is a perfect illustration of this. These pipes combine chemical, abrasive and mechanical resistance, and were buried at a depth of more than 12m to ensure a gravity flow rate for a charged fluid. This project required the processing of 3400 tonnes of GRP vinylester over 24 months and was the subject of a case history.

We design, manufacture and install entertainment areas that will attract the attention of children, develop their creativity and enable them to socialize! We create climbing walls, ball pools, tunnels, racing tracks, art workshops and pleasant areas for entertainment centers special to our customers' projects. We integrate quality materials with ergonomic designs and creative ideas. If you want to get information about our company-specific project and production processes, contact us, let's open the door of a completely different world!

Hugo Beck can claim a decade-long development tradition when it comes to automation. We offer support with our expertise throughout the entire automation process, from project planning and manufacture right through to integration into complex packaging lines. Handling systems such as portals, grouping solutions, stacking and counting devices, cross pusher to name but a few, are integrated reliably into the packaging solutions by our technicians. Furthermore, various robots systems are used across many industries for the automated feeding of products, helping to for example grip, position, stack, group, stage products. From a parallel robot (also known as a spider robot) all the way through to a SCARA robot – anything is flexibly possible and delivered fully integrated according to each customer‘s needs. Both robots and handling systems can all be purchased independently of Hugo Beck packaging machines.

IFA Technology accompanies you throughout the entire process chain - from project planning and engineering to production and commissioning. Our worldwide IFA aftersales service offers you: Remote maintenance of your machines and systems Fast repair service and spare part service Personal contact persons for plant engineering and electrical engineering Individual support for retrofitting and upgrading projects of existing plants or systems

We offer customized die-cast parts, stamped parts, deep-drawn parts, turned parts, milled parts and contact springs, both as small-precision and large parts. Partial or complete plastic and rubber injection molding of metal parts is also part of our portfolio. The manufactured metal parts can be completed with sealing elements, threaded inserts and bearing bushes. We also offer processes for cold pressing, as well as cost-effective surface finishing. We accompany our customers throughout the entire project process and organize the tool and sample production as well as the production (including surface finishing) and optionally also the assembly of the series parts.

Whether an individual circuit board or full-scale, demanding device assembly – PRUFREX will manufacture your products to your individual specifications and quality guidelines. Whether it's manual soldering with robotic support, wave and selective soldering or laser soldering – in all assembly tasks, we are able to use any technique required without a problem. Depending on the component, different soldering technologies offer different advantaged. We will adjust the process individually to your project.

Technical information The electric cutting machine impresses with its compact build, quick processing times and flexible applications. Special features: Easy operation due to its 5“ display Simple insertion of wires Horizontal working level for improved insight into the operating area Guided conduction of cut wires Possibility to generate complete projects on the machine Optional extension for multiple infeed with the Z+F EVOFEED Full integration into the WPC is possible Multiple infeed Z+F EVOFEED By providing up to 12 conductors it is possible to sequentially process complex projects in a simple and effective way. The automatic feeding process makes manual interference obsolete and allows the processing of different cross-sections or colors according to the respective planning. This is very time-saving for the overall process, as individual jobs and projects can be processed autonomously.

Clothing manufacturer in Europe working on all types of projects.Eco-friendly solutions In times like these we focus on beeing as Eco-friendly as possible. We know this is important to both your company and your customers. Time Efficienct Our goal is for short lead times by focusing on initiation and completion of all production process. Ideas and projects We are glad to help with anything from ideas to sourcing for materials.

Clothing manufacturer in Europe working on all types of projects.Eco-friendly solutions In times like these we focus on beeing as Eco-friendly as possible. We know this is important to both your company and your customers. Time Efficienct Our goal is for short lead times by focusing on initiation and completion of all production process. Ideas and projects We are glad to help with anything from ideas to sourcing for materials.

Scantra® is a programme for automated registration of point clouds captured by terrestrial laser scanners based on identical planes and points. It has been designed to process very large projects with hundreds to thousands of scans with superior accuracy way beyond the error-budget of ICP-based solutions. Typical fields of application are as-built documentation, construction site monitoring or deformation measurement. Scantra is the only software on the market that satisfies established demands from Geodetic Engineering by delivering extensive and meaningful quality measures which stem from a high-performance Block Adjustment. Scantra is capable to handle highly redundant registrations as a consequence of loop-closure constraints yielding in reliable results. Be a part of our net - your advantages at a glance

SONET is a modern variation of classic look armchair. Shapes and form which can be easily arranged to any interior both spacious and more compact ones. During the project process we have followed the idea to offer a single object which can change entire space. Beside chic and style SONET guarantees amazing comfort of rest during your free time. Additional cushion with its special solution can be used as lubar support and headrest.

Metal chair frames are the basis of every solid and durable piece of furniture. Without them, in many cases, the design of the chair would be impossible. As a manufacturer of metal chair frames, we focus on the quality of workmanship and precision in production. Metal chair frames manufacturer - Project implementation process Our machine park includes many CNC numerically controlled machines. It is a technology thanks to which we are able to make chair frames of various shapes and sizes while maintaining high quality. The bending of metal chair frames is performed on CNC mandrel benders, which ensures perfect precision and repeatability of production. Thanks to this, our frames are perfectly matched to the other elements of the chairs with which they will be connected. In our production process, chair frames are welded on a robotic welding station. This not only ensures high joint quality, but also increases production efficiency. Robotization

Welding electrodes made of tungsten, molybdenum and their alloys are particularly suitable for welding highly conductive materials such as copper. They are used in the following processes: Spot welding, Roller welding, Projection welding, Upset welding. Welding electrodes made from our refractory metals and their alloys have a relatively high level of electrical conductivity while also exhibiting outstanding stability at high temperatures. They therefore have a considerably longer service life than conventional materials such as copper and copper alloys.

Systems & Modules SMS designs, manufactures and supplies complete systems & modules for evaporation, drying and membrane applications. Our scope of supply includes: Consulting / Feasibility Studies Pilot Test Process Design Plant Engineering Project Management Procurement / Manufacturing / Delivery Erection / Installation Start-Up / Commissioning After-Sales Service Skid-Mounted Modules For more than 40 years SMS has been supplying skid-mounted units for the benifit of our customers. The skids are fully assembled, including piping, wiring and testing in the SMS Workshop or in our partners´ workshop. The modular design significantly reduces the required amount of work for assembly and start-up which minimizes the downtime of the existing plant equipment and - as a result - just minor effects occur on the current production.

Liquid Silicone Rubber (LSR) is a material for injection moulding that is being used more and more by Enbi Plastics. It is durable, flexible, and extremely versatile. Not to mention, it is also very cost efficient. By means of this article, Enbi Plastics aims to help you make the right decisions in terms of material type and which process composition best suits your project. Within just a few steps it’ll quickly become clear which choices are important when starting an LSR project. Want to know more about what LSR is exactly? Feel free to read more about the properties and benefits of LSR in our previous article: “Welcome to the World of Liquid Silicon Rubber”. Would you like to know more about LSR and why it is the best choice for your injection moulding project? Please feel free to contact one of the experts at Enbi Plastics.

We have signed an agreement with the Ministry of Economic Development and Technology on funding of the project DiaVit. In the project our company acts as a partner for industrialization process. Project is co-financed by The Republic of Slovenia and the European Union from the European Regional Development Fund. The main objective of the DiaVit project is the development of a non-invasive blood glucose self-monitoring device. Our goal is to improve the lives of diabetic patients worldwide by simplifying the way they measure blood glucose levels and monitor the disease.

During development we will work closely with you, guide you through the complete development process, and once your product is developed, we will produce it in our factory. Product development consists of technical specification and requirements definition, architecture definition, BOM optimization, HW, SW and mechanical designs, electric and thermal simulations, optics simulation and design, functional tests, end of line test equipment design, highly accelerated lifetime tests and packaging design. Design processes follow known project management standards.

Sustainability is very important to us, so we buy back existing plants, upgrade and adapt them to customer needs Siempelkamp machines and plants go through a sustainable life cycle We buy back machines and entire plants that were in operation and adapt them to the individual needs of our customers. We modernize used plants and upgrade them to current industry-standards with increased performance. Siempelkamp offers you a wide range of pre-owned machines and plants When purchasing a plant that has been in operation, professional and cost-effective implementation of all measures - from dismantling to commissioning - are decisive processes for project success. We offer you second-hand plants for the production of particleboard, MDF and OSB with continuous press systems from well-known brands such as Siempelkamp, Küster, Bison, and Metso.

AMETEK EMC are experts at connector and cable assembly including design, material selection, manufacturing processes, project management, product validation, and regulatory compliance.

Hydraulic power units are produced in close cooperation with customers. Highly-qualified technical and commercial marketing staff are continually working to meet the needs and wishes of our customers and their problems from the field of hydraulics. Gidrolast offers our customers knowledge, expertise and experience in solving such problems. Gidrolast engineering knowledge is a core competence of projecting processes. In this process, our engineers design hydraulic power units to customer requirements, all necessary documentation is prepared and risks and production capabilities are assessed and the whole project is prepared for execution. In the sales process, the customer gets a full quotation. The whole process of monitoring the execution of customer’s order is carried out by the business information power unit. In order to delivery process the hydraulic power unit is produced, tested, adjusted and prepared for transport on the basis of technical documentation.

The surface control optic LEDLPO is used for surfaces with high reflection and can be employed in all coating processes in the industry. It projects very focused, multi-point light on a surface (sunlight simulation). Possible surface defects and holograms are more visible.

The surface control optic LEDSLO is used for surfaces with high reflection and can be employed in all coating processes in the industry. It projects multi-point light on a surface (sunlight simulation). Ultra-fine defects are visible with LEDSLO.

PARAMETERS Specifications and Sizes: Aluminum skin thickness: 0.06mm-0.50mm Total panel thickness: 2mm, 3mm, 4mm, 6mm Width: 1250mm,1500mm Length: 3200mm - 6000mm Standard size: 1250mm(Width) ×3200mm(Length) , 1500mm(Width) ×3200mm(Length) Non-standard sizes and special colors are available depending on customers’ offers Weight: 4mm is 5.5kg/m² , 6mm is 7.3kg/m² Qty/20'fcl: 2380m²/4mm, 2977m²/3mm Available Colors: We can produce all colors on all professional color cards Feature: Weather resistance, high strength, easy maintenance/convenient for project construction/excellent processability/thermal resistance/sound insulation and good fire prevention performance/good plasticity, impact resistance/shock resistance/ good smoothness, light and strong/ to choose color/ gorgeous and colorful decorative, decorative pattern and design can be customized

PARAMETERS Specifications and Sizes: Aluminum skin thickness: 0.06mm-0.50mm Total panel thickness: 2mm, 3mm, 4mm, 6mm Width: 1250mm,1500mm Length: 3200mm - 6000mm Standard size: 1250mm(Width) ×3200mm(Length) , 1500mm(Width) ×3200mm(Length) Non-standard sizes and special colors are available depending on customers’ offers Weight: 4mm is 5.5kg/m² , 6mm is 7.3kg/m² Qty/20'fcl: 2380m²/4mm, 2977m²/3mm Available Colors: We can produce all colors on all professional color cards Feature: Weather resistance, high strength, easy maintenance/convenient for project construction/excellent processability/thermal resistance/sound insulation and good fire prevention performance/good plasticity, impact resistance/shock resistance/ good smoothness, light and strong/ to choose color/ gorgeous and colorful decorative, decorative pattern and design can be customized

PARAMETERS Specifications and Sizes: Aluminum skin thickness: 0.06mm-0.50mm Total panel thickness: 2mm, 3mm, 4mm, 6mm Width: 1250mm,1500mm Length: 3200mm - 6000mm Standard size: 1250mm(Width) ×3200mm(Length) , 1500mm(Width) ×3200mm(Length) Non-standard sizes and special colors are available depending on customers’ offers Weight: 4mm is 5.5kg/m² , 6mm is 7.3kg/m² Qty/20'fcl: 2380m²/4mm, 2977m²/3mm Available Colors: We can produce all colors on all professional color cards Feature: Weather resistance, high strength, easy maintenance/convenient for project construction/excellent processability/thermal resistance/sound insulation and good fire prevention performance/good plasticity, impact resistance/shock resistance/ good smoothness, light and strong/ to choose color/ gorgeous and colorful decorative, decorative pattern and design can be customized

PARAMETERS Specifications and Sizes: Aluminum skin thickness: 0.06mm-0.50mm Total panel thickness: 2mm, 3mm, 4mm, 6mm Width: 1250mm,1500mm Length: 3200mm - 6000mm Standard size: 1250mm(Width) ×3200mm(Length) , 1500mm(Width) ×3200mm(Length) Non-standard sizes and special colors are available depending on customers’ offers Weight: 4mm is 5.5kg/m² , 6mm is 7.3kg/m² Qty/20'fcl: 2380m²/4mm, 2977m²/3mm Available Colors: We can produce all colors on all professional color cards Feature: Weather resistance, high strength, easy maintenance/convenient for project construction/excellent processability/thermal resistance/sound insulation and good fire prevention performance/good plasticity, impact resistance/shock resistance/ good smoothness, light and strong/ to choose color/ gorgeous and colorful decorative, decorative pattern and design can be customized