Results for
MAHLO GMBH & CO. KG
Germany
Ionisation of the air The Antistat AMW ioniser for trouble-free processing of synthetic materials and of textiles with high charge separation. By ionising the ambient air, the electrostatic charge is diverted from the product sheet. Antistat AMW can be used at high or low speeds.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Condensate temperature control The Atmoset SMT regulates the residual moisture of the tissue with steam-heated cylinder dryers. The deviation of the condensate temperature from a preset setpoint is used to directly calculate the amount of energy required for drying. The heating output is optimised according to the product. The Atmoset SMT enables a stable and effective drying process. The optimal degree of drying is always reached, regardless of the weight of the product or the web speed.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Reflexion of infrared light Automatic width measurement on a running product web. IR LEDs used in reflective mode continuously and precisely determine the product width. The sensor module only needs to be attached on one side of the product. The compact design allows it to be installed even in the tightest mounting spaces. Retrofitting is possible virtually anywhere.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Transmission of beta rays The weight monitoring and control system measures the weight continuously, without contact, destruction-free and on moving product. The measurement is based on the attenuation of rays from a radioactive isotope through the substrate located in the measuring gap. This attenuation in intensity is an indication of the weight of the product.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Control of thread density / course density / basis weight The Famacont PMC determines the thread density by means of a non-contacting, optoelectronic or imaging process. With the optoelectronic process individual threads or courses pass the sensor and are projected onto the photocell using a precision optical lens. The resulting frequency is proportional to the thread count. A high-resolution camera is used with the imaging process. The image is analysed with using suitable software (FFT analysis). Both, the thread count in weft and warp direction can be determined here with maximum precision.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Optimizes drying The Ecopac EMC uses the state of the art microprocessor technology to ensure product quality and optimise the energy balance for drying processes. The modular system for monitoring and controlling residual moisture, product temperature, dwell time and exhaust air humidity can be flexibly adapted to current production. Up to three of the same or different modules may be used as needed. This increases quality while saving resources and energy. The modular design of the system allows its flexible adaptation to all applications. Both, standard requirements and highly customized demands are thus met.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Optimizes finishing The Orthopac VMC is a modular process control system for textile refinement. It optimises drying or fixing processes as well as the processes all about the stenter. The system measures, logs and controls critical process parameters over the entire working width like temperature, dwell time, residual moisture, exhaust air moisture, thread density, basis weight and more. This increases quality while saving resources and energy. The modular design of the system allows its flexible adaptation to all applications. Both, standard requirements and highly customized demands are thus met. The system can also be integrated into an Orthopac straightening system. It thereby combines the functionality of a weft straightener with that of a process control system in one compact device.
Request for a quoteMINEBEA INTEC GMBH
Germany
The freely programmable process controller, designed for applications as diverse as simple weighing complex manual and automatic Batching and single component Filling. Extensive connectivity options and compatibility with all analogue load cells and the digital Pendeo® load cells as well as platform scales and many more weighing solutions. Connection of one analogue or one digital scale or Pendeo® digital load cell system 4.3" large colour display with multilingual interface and integrated help function for intuitive operation Multiple interface possibilities: Ethernet TCP/IP, Modbus TCP, Profibus DP, DeviceNet, Profinet, Ethernet/IP and USB Equipped with an internal web server, the Maxxis 4 can be configured and controlled via any standard web browser Automatic backup function saving data to SD cards for full transparency and traceability
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
For all CSN® heaters and heating systems we manufacture perfectly matching process controllers. Please contact us to talk about the appropriate control options. CSN® standard contactor controls consist of Enclosure Main switch Load protection Control protection Step protection Indicator light In economical heating systems the load is controlled by thyristors, thus ensuring an accurately dosed power supply. CSN® thyristor controls consist of Enclosure Main switch Semiconductor fuses Contactor Solidstate relays in 3phase economy circuit or Thyristor Control switch Control protection PID controller Indicator light Of course, we also manufacture process controls according to your individual requirements! Further information about our CSN® Controls
Request for a quoteZETEK SP. Z O.O.
Poland
In the vast majority of plants, especially in the automotive, aviation and machine industries, one of the basic requirements is QA - Quality Assurance . This in turn requires reliable and permanent quality control (QC ). Quality assurance and its control are often related, although they are defined differently. The differences between quality assurance and quality control Quality assurance activities and responsibilities usually cover virtually the entire quality system, while QC is a series of quality control activities. In addition, elements of the quality system may not be specifically covered by QA / QC activities and responsibilities, but may include QA and QC. Referring to the above definition, as well as taking into account the industry in which we operate, we come to an important issue, i.e. measurement control. Measurement control The scope of measurement control includes many ways and methods, which often requires devices individually
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
IROS 05i is a special FTIR spectrometer designed for work in harsh conditions. This model allows solving a wide range of industrial problems, including process control, with the possibility of online (in situ) monitoring of industrial processes (in reactors or pipelines) both for laboratories and industry facilities. Features: - Completely tight metal case - Ports for connecting external cooler and purging with inert gases to protect and stabilize the optical unit in difficult environmental conditions - Module for connecting fiber optic probes (up to 2 simultaneously) Advantages: - Ability to connect 2 probes, allows working with the device in 2-channel mode, monitoring simultaneously processes taking place in 2 different reaction environments - Control software allows setting flexible routines with continuous analysis and evaluation of data obtained in real-time - Wide range of probes designed for use in corrosive environments, at high pressures and temperature, among others
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
The AE25™ is a ¼ DIN multi-loop process controller provides easy operation and review of process variables and set-point information. FEATURES • controls carbon potential, dewpoint, temperature, and oxygen concentration • paperless chart recorder with USB port for data retrieval • Ethernet (Modbus-TPC) communication port for remote process monitoring and control. • simplified PID tuning with Auto-tune reduces startup configuration time and quickly gets your process up and running fast
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
The Protherm 455 is a ½ DIN powerful controller designed to monitor, control and record a variety of heat treating processes. Used in new furnaces as well as for refurbishing or updating existing systems, it is ideal for nitriding, nitrocarburizing, carburizing, carbonitriding, hardening, tempering and vacuum furnaces. FEATURES • color touch-screen interface • built-in chart recorder function • calculates variables such as % carbon, dew point, or millivolts, and percent oxygen • stores up to 200 19-step recipes • direct drop-in replacement for Marathon Monitors’ CarbPro, DualPro, MultiPro, and Carb PC • works with internal and/or external I/O’s • suitable for all types of processes such as nitriding, nitrocarburizing, carburizing, carbonitriding, plasma and vacuum • standard connectivity allows for integration with SCADA systems • for compliance with CQI-9, AMS 2750, & AMS 2759/10-12
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
The Protherm 470 controller is designed to monitor, control, record and archive heat treatment processes running in a furnace or simultaneously in multiple chambers. They are configurable for various types of batch and continuous furnaces. Installations are done on new or refurbished furnaces and are used for updating existing systems. FEATURES • ½ DIN multi-loop embedded programmer with a color display and turn-and-push knob navigation • Up to 32 programmable PIDs included • built-in calculators for real-time carbon and/or nitrogen diffusion, and hardness profile • mathematical model for calculating atmospheric parameters • integrated web server for browser-based remote access • works with internal and/or external I/O’s • suitable for all types of processes such as nitriding, nitrocarburizing, carburizing, carbonitriding, plasma and vacuum • standard connectivity allows for integration with SCADA systems • for compliance with CQI-9, AMS 2750 & AMS 2759/10-12
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
Our modular control packages are customized to significantly improve your annealing / bright annealing / normalizing operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Annealing / Bright annealing / Normalizing control Solution is supplied with a PROTHERM controller and either an AccuCarb® LTA probe or FurnaceDoctor® FX analyzer or with Protherm ActivePLC™, FurnaceMeter™, AtmoSense™ and UPC oxygen probes for a variety of furnace types. FEATURES • AMS 2750, CQI-9, NFPA 86-C, NADCAP* • Latest achievements in process control • Cost-effective module configurations * depending on the options chosen
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
Our modular control packages are customized to significantly improve your annealing / bright annealing / normalizing operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Annealing / Bright annealing / Normalizing control Solution is supplied with a PROTHERM controller and either an AccuCarb® LTA probe or FurnaceDoctor® FX analyzer or with Protherm ActivePLC™, FurnaceMeter™, AtmoSense™ and UPC oxygen probes for a variety of furnace types. FEATURES • AMS 2750, CQI-9, NFPA 86-C, NADCAP* • Latest achievements in process control • Cost-effective module configurations * depending on the options chosen
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
Our modular control packages are customized to significantly improve your annealing / bright annealing / normalizing operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Annealing / Bright annealing / Normalizing control Solution is supplied with a PROTHERM controller and either an AccuCarb® LTA probe or FurnaceDoctor® FX analyzer or with Protherm ActivePLC™, FurnaceMeter™, AtmoSense™ and UPC oxygen probes for a variety of furnace types. FEATURES • AMS 2750, CQI-9, NFPA 86-C, NADCAP* • Latest achievements in process control • Cost-effective module configurations * depending on the options chosen
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
UNITED PROCESS CONTROLS GMBH
Germany
Our modular control packages are customized to significantly improve your nitriding/nitrocarburizing operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Nitriding / Nitrocarburizing Control Solution is supplied with a PROTHERM controller, hydrogen analyzer and optional NitroCarb™ probe for nitrocarburizing. Precise atmosphere control: KN, KC, KO or % dissociation. FEATURES • Full compliance with AMS 2750D, 2759/10A, 2759/12 (FNC), NFPA 86-C section 14-9, CQI-9, Nadcap* • Latest achievements in nitriding & nitrocarburizing process control • Cost-effective module configurations for new installations or retrofits * depending on the options chosen
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
Our modular control packages are customized to significantly improve your carburizing/carbonitriding operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Carburizing / Carbonitriding control solution for batch furnaces supplied with a PROTHERM universal programmable controller. Optional online carbon and nitrogen diffusion and β-control modules available for even more precise control. FEATURES • Full compliance with AMS 2750, CQI-9, NFPA 86-C, NADCAP* • Precise atmosphere control (carbon potential control) • Furnace temperature control • Quench (oil) temperature control • Alarm notification and processing • Password protected interface • Real time and historical...
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
Our modular control packages are customized to significantly improve your nitriding/nitrocarburizing operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Nitriding / Nitrocarburizing Control Solution is supplied with a PROTHERM controller, hydrogen analyzer and optional NitroCarb™ probe for nitrocarburizing. Precise atmosphere control: KN, KC, KO or % dissociation. FEATURES • Full compliance with AMS 2750D, 2759/10A, 2759/12 (FNC), NFPA 86-C section 14-9, CQI-9, Nadcap* • Latest achievements in nitriding & nitrocarburizing process control • Cost-effective module configurations for new installations or retrofits * depending on the options chosen
Request for a quoteMINEBEA INTEC GMBH
Germany
The software SPC@Enterprise combines classic filling quantity control with dynamic process control for a wide range of different systems, thereby efficiently supporting quality management of your production processes. Efficient networking of a diverse range of devices and systems from Minebea Intec and other vendors Fast process control due to powerful monitoring program Easily generate production or calibration statistics Displays the current status of checkweighers and metal detectors including daily history, logging of error messages, product changes and events Email dispatch of alarms Simple data backup will return a lower risk of data los
Request for a quotePARSMEGA MAKINA
Turkey
It has wide usage opportunities in all areas where engine use is intense, such as production lines, factories, smart buildings, treatment facilities, pump stations. Our panels are designed considering the ease of operation and maintenance of MCC, with standards-compliant solutions for production lines and control that require process control. Our project support, the solutions we produce for control systems with conventional or "process controllers", our knowledge and experience are an important privilege we offer to our customers. Using the right equipment or system in the right place and our complete solutions made with quality equipment are part of our tradition of achieving important criteria such as operational safety and investment efficiency for the benefit of the end user.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
They are the accessories used in electronic panel control,after processing for a variety of color surface treatment.
Request for a quoteGEBR. HELLER MASCHINENFABRIK GMBH
Germany
Flexible production of crankshafts and camshafts Machine series for perfect internal and external milling - as stand-alone machine or linked manufacturing system Highlights Internal and external milling of crankshafts Turn-chasing of crankshafts External milling of camshafts Advantages Unique HELLER know-how of the complete process chain Use of a combination of different technologies Dependable process control
Request for a quoteCTRA
Tunisia
We have a skilled quality control team and a laboratory that enables us to carry out trials and tests to ensure the quality of raw materials and finished products. As soon as we receive the raw materials, we carry out the necessary tests to ensure that they comply with the specifications provided by the suppliers. Monitoring and controlling the manufacturing process Ensuring traceability of manufactured products Ensuring that finished products comply with CTRA standards and/or customer specifications by carrying out various in-process checks. Non-destructive testing Visual / Dimensional Polymerisation Destructive testing Calcination test (loss on ignition) > in-house Peel test (separation) > in-house Tensile test > carried out by an approved external body Bending test > carried out by an approved external body
Request for a quoteMH MULTIPACK SDN BHD
Malaysia
Aseptic Nested Filing Line from De-bagging, De-liding, Filling and Stoppering system. Vacuum Stoppering system to minimize entrapped filling & drip-free. “Trackless” Rubber stopper feeding to eliminate jamming at the track. Statistical Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check. Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion.
Request for a quoteMH MULTIPACK SDN BHD
Malaysia
Vacuum Stoppering system to minimize entrapped filling & drip-free. Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Valveless Rotary Piston pump for Hygiene Filling. Contact parts are FDA Approved material and autoclavable. Optional Laminar Air Flow Booth. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere. Optional 100% Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Web process control The Qualiscan QMS is a modular system for measuring, logging and controlling critical process parameters over the entire width of the product, including basis weight, coating weight, thickness, moisture etc.
Request for a quoteLUTZ PUMPEN GMBH
Germany
Electronic piston dosing pump FEDOS DX The microprocessor-controlled FEDOS DX combines the proven features of the FEDOS series with the latest requirements in dosing technology. Ideal for applications that require integration of the pump into control systems or control loops, the FEDOS DX offers versatile adaptation to various control signals and system monitoring. Main features: Performance range: 0.17 to 31.5 l/h, up to 100 bar Flexibility: Adjustment of the stroke frequency by division or multiplication Precision: Suitable for precise mixing tasks Independence: Low dependence on back pressure Efficiency: Linear change in dosing quantity with the stroke length Ease of use: Plunger drive with easy-to-operate power adjustment Optional: Rinsing lantern The FEDOS DX is the ideal choice for precise dosing applications that require high accuracy and adaptability.
Request for a quoteResults for
Process control - Import exportNumber of results
181 ProductsCountries
Company type
Category