Power supplies - Import export

With the Lascar PSU EL-IOT power adapter for EasyLog Smart Probe data loggers you are assured of a safe and reliable energy source. This adapter has a universal input voltage of 100-240 V ac and an output voltage of 9 V dc. The adapter comes with four interchangeable plugs (UK, US, EU and AU/NZ), so it can be used anywhere in the world. The cable has a length of 1 meter and therefore offers sufficient freedom of movement. Connect your data logger to this adapter and you can always rely on a stable power supply. With the Lascar PSU EL-IOT power adapter for EasyLog Smart Probe data loggers you are assured of a safe and reliable energy source. This adapter has a universal input voltage of 100-240 V ac and an output voltage of 9 V dc. The adapter comes with four interchangeable plugs (UK, US, EU and AU/NZ), so it can be used anywhere in the world

The power supply units of the PSU67 series are IP67 rated and can be mounted in the field. The devices bypass short power drops of maximally 50 independently. In addition, no-load and short-circuit protection as well as the passive air cooling increase the fail-safety of the devices. The output current is - depending on the type - 2 A, 4 A or 8A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. The high efficiency of up to 90% provides a good energy balance.

The power supply modules of the IM82-24 series feed DC consumers and especially our IM, IMS and IMC interface modules with 24 V. The devices are mounted on DIN rail and meet protection class IP20. The output current is - depending on the type - 2.5 A, 5 A, 10 A or 20 A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. Other features include high efficiency, as well as temperature resistance and dynamic overload capability.

60m long strip driven by one end power supply with the same brightness from end to end Wide range of input voltage/reverse connecting&over temperature protection MAX 60℃operating temperature Longer for strip using, longer for wiring, higher efficiency with 48V system NA/ET/EF/EG IP process

NECRON NPE SERIES 140 Ah 12V BATTERY MAINTENANCE FREE - VRLA-AGM

NECRON NPL SERIES 65 Ah 12V BATTERY MAINTENANCE FREE - VRLA-AGM

NECRON NPL SERIES 45 Ah 12V BATTERY MAINTENANCE FREE - VRLA - AGM

NECRON NPL SERIES 28 Ah 12V BATTERY MAINTENANCE FREE - VRLA-AGM

NECRON NPL SERIES 9 AH 12V BATTERY MAINTENANCE FREE - VRLA-AGM

NECRON NPL SERIES 100 Ah 12V BATTERY MAINTENANCE FREE - VRLA-AGM

NECRON NPE SERIES 100 Ah 12V BATTERY MAINTENANCE FREE - VRLA-AGM

DC Power supplies are produced in Turkey under the Alphaworld brand. Domestic production DC power supplies are under warranty for 2 years against manufacturing and workmanship defects. All products produced by Alphaworld have a 15-year spare parts warranty. Technical service is provided 24 hours a day, 7 days a week in 81 provinces. Technical information of our product is in the detail section below. DC Power Supply DC power supply offers a solution for those who want to obtain high power without interruption. Most of the electronic devices we use today operate with DC electric current. In many cases, AC electric current coming from the mains is converted into DC electric current thanks to special converters. Batteries are preferred for charging the devices. However, compared to DC power supply prices, batteries appear to be a very expensive alternative. In industrial applications, cost-reducing solutions are preferred.

On-Line Double Conversion Technology Galvanic Isolation Transformer 2KVA-60KVA power range for Single phase 10KVA-200KVA power range for three phase IGBT and PWM technology Automatic By-Pass system Maintenance By-Pass Switch Internal Battery Option Extendable Battery Duration Operator Panel with LCD Display TS EN ISO 9001: 2015 Quality Certified It is produced on order

The transducer is suited for the most varied measurement duties on threaded fasteners, to check and adjust assembly tools, like screwdrivers and spanners, and to sense loosening torques, etc. It can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. Hence, there is practically no wear on the device. This sensor is suited for cyclical as well as continuous testing of tools. As the sensor is designed to be torsionally rigid any errors due to it are minimized. No service needed because of contactless data aquisition High interference immunity due to amplified active signal High accuracy due to frequency modulation and strain gage technology Power supply Optional angle detection torque ranges from 1 Nm up to 10.000 Nm torque with square drive with or without angle (w) function Variant bracket for quick assembly

12 V power supply unit with a maximum load current of 1.5 A

DC12~24V Power input DC12~24V Power supply with overcurrent Overvoltage and polarity inverse protection Easy to switch RS232/RS485 RS232/RS485 support automatic data flow control

The DN 102 power supply in the KERSTEN neXt® product family is the control station for your discharge system. It supplies and controls up to 5 high voltage generators in the KERSTEN neXt® range and also offers you connection and control of a solenoid valve or AK 1x6 compressor controller. Floating contacts are provided for error and enabling signals. The current operational status of each function is signalled via 9 LEDs in the enclosure lid.

- Operating voltage: 630 V AC/DC- Up to 12 A per pin - Operating current per contact max. 12 A - 4-pole - S-coded - Temperatur (fixed line): -25 bis +80°C - Temperatur (moving line): -20 bis +80°C - Material: PUR - Very compact connection for cables with wires up to 2.5 mm² - Reverse polarity protected, shockproof and vibration-proof - Made of high-quality plastic - Molded wires

Technical Parameters : ModelSTL004 ColorBlack Power60W/100W/150W/200W/300W PF0.5 IP protectionIP20 Dimension134.8*49.4*28.6MM/134.8*49.4*28.6MM 186 *49.4*28.6MM/207 *58.6*28.6MM 249 *58.6*28.6MM VoltageDC24V Input voltage220V-240V Warranty Period3 YEARS CertificationCE, RoHS

The high-performance discharge power supply POWER IONIZER impresses with its flexibility. The simple operation, the LED display for visualization of the current values and the integrated function and malfunction monitoring characterize the power supply unit. The POWER IONIZER can be operated with the Eltex AC discharging bars, ion blower nozzles and ion blower pistols. Lowest residual charges can be achieved by different adjustable parameters. Operation is possible as single unit or in a network.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES51 features 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design with protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES53 complies with the requirements of the EX approval BAS98ATEX2179X (discharging bar) and PTB00ATEX2071X (blower head). It is characterized by 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design in protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).

• Bridging power supply through the DIN rail bus connector (CB-Power-Bus) • Redundant power supply • Built-in over-voltage (surge) protection • Supply of up to 75 modules • Two individual power supply sources can be connected to one SINEAX VS70 module • Spring cage clamp connection

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Small and compact in size, this unit stands out against conventional transformer solutions both in its small dimensions and low weight. Independent from international variations in line voltages, Compact Power ES24 delivers ultimate flexibility in use. This power supply can be used as voltage supply for all Eltex discharge electrodes and blower nozzles in non-hazardous areas.