Results for
SIKO GMBH
Germany
Version with two counters (4 or 5 decades) and fine reading. Predestined for use with wood milling machines. Hollow shaft, max. Ø 30 mm. Display can be designed for “mm” or “inch”.
Request for a quoteSIKO GMBH
Germany
Robust design in a metal housing. Hollow shaft, max. Ø 20 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Attenuated counter system. Fine setting for correction of dimensions. Reversible counting direction.
Request for a quoteSIKO GMBH
Germany
Designed for large diameters. Hollow shaft, max. Ø 30 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof.
Request for a quoteSIKO GMBH
Germany
Extremely sturdy design in a metal housing. Hollow shaft, max. Ø 35 mm. Counter with 4 or 5 decades. With zeroing function. Clamp lever integrated in the design. Stainless-steel driving shaft as an option. Reversible counting direction.
Request for a quoteSIKO GMBH
Germany
Hollow shaft, max. Ø 14 mm. Counter with 4 decades and fine reading. Detent as an option. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).
Request for a quoteSIKO GMBH
Germany
Ultra-small design. Hollow shaft with max. Ø of 10 mm. Minimum axle base of 19 mm. Counter can be designed for “mm” or “inch”. Stainless-steel driving shaft as an option.
Request for a quoteSIKO GMBH
Germany
Most-used size in slim design. Hollow shaft, max. Ø 20 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).
Request for a quoteLENORD, BAUER & CO. GMBH
Germany
Fast and controlled format changes thanks to the intuitive SeGMoAssist digital position display from Lenord+Bauer, that's now possible even in plants without fully automated adjustment. • For guided format adjustment • Display of nominal and actual position to facilitate manual adjustment processes • Bright graphical display • Presentation of customerspecific pictograms • Optional for rotatory and linear position measurement • Insensitive to EMC interference • Ready for use immediately after power on due to absolute multiturn position detection • Maintenancefree
Request for a quoteLENORD, BAUER & CO. GMBH
Germany
Fast and controlled format changes thanks to the intuitive SeGMoAssist compact nominal value display from Lenord+Bauer, that's now possible even in plants without fully automated adjustment. • Display supports the operator, e.g. during format or tool changes • Bright graphical display • Presentation of customerspecific pictograms • Insensitive to EMC interference • Maintenancefree
Request for a quoteSIKO GMBH
Germany
freely programmable Profile DE10P: Freely programmable directly via buttons on the device Hollow shaft, max. Ø 30 mm Stainless-steel hollow shaft LCD display with 6 digits and special characters Digit height approx. 11 mm Long battery life Easily replaceable batteries (standard AAA) Incremental measurement function, absolute value display high degree of protection
Request for a quoteSIKO GMBH
Germany
For large shaft diameters Profile DE10: Freely programmable electronic digital display for length or angular measurement Freely programmable via the ProToolDE programming software Hollow shaft, max. Ø 30 mm LCD display with 5 digits and special characters Digit height approx. 12 mm Reset, incremental measurement, offset via keyboard Long battery life Easy battery change without dismantling of the device
Request for a quoteSIKO GMBH
Germany
Freely programmable Profile DE04: Freely programmable electronic digital display for length or angular measurement Freely programmable via the ProToolDE programming software Hollow shaft, max. Ø 14 mm LCD display with 5 digits and special characters Digit height approx. 8 mm Reset, incremental measurement, offset via keyboard Long battery life Easy battery change without dismantling of the device
Request for a quoteSIKO GMBH
Germany
Profile AP24: For tool change and target value specification Remote display without actual value measurement Acknowledgement button integrated bus interface (RS485) Two-line LCD-Display User guidance via bicolor LED M8 plug connection
Request for a quoteSIKO GMBH
Germany
With bus interface, for direct linear length measurement Profile AP04S: Electronic position indicator with plug connection for magnetic sensor Requires magnetic sensor MS500H and magnetic tape MB500/1 Easily readable, two-line LCD for target and actual values integrated RS485 interface, CAN bus as an option Display accuracy up to 0.01 mm Absolute function via internal backup User guidance via bicolor LED
Request for a quoteSIKO GMBH
Germany
With bus interface Profile AP04: Electronic position indicator with bus interface Compact design Hollow shaft, max. Ø 20 mm Easily readable, two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Robust sensor technology unit thanks to magnetic scanning User guidance via bicolor LED
Request for a quoteSIKO GMBH
Germany
with bus interface, for format part or tool change Profile AP10T: setpoint display with bus interface without measurement of actual value large control key to confirm target value optimally readable backlit display Two-line LCD-Display integrated RS485 interface, CAN bus as an option user guidance via bicolor status LEDs IP53 type of protection, IP65 as an option
Request for a quoteSIKO GMBH
Germany
Profile AP10S: Electronic position indicator with plug connection for magnetic sensor optimally readable backlit display Two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Display accuracy up to 0.01 mm Absolute function via internal backup user guidance via bicolor status LEDs IP53 type of protection, IP65 as an option
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SIKO GMBH
Germany
Profile DA10R/1: Version with two counters (4 or 5 decades) and fine reading Predestined for use with wood milling machines Hollow shaft, max. Ø 35 mm Display can be designed for “mm” or “inch”
Request for a quoteSIKO GMBH
Germany
Profile DA10: Designed for large diameters Hollow shaft, max. Ø 30 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof
Request for a quoteSIKO GMBH
Germany
Basic device with 5 decades Profile DA09S: Most-used size in slim design Hollow shaft, max. Ø 20 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof Clamping plate (see accessories)
Request for a quoteSIKO GMBH
Germany
Profile DA08: Extremely sturdy design in a metal housing Hollow shaft, max. Ø 35 mm Counter with 4 or 5 decades with zeroing function Clamp lever integrated in the design Stainless-steel driving shaft as an option Reversible counting direction
Request for a quoteSIKO GMBH
Germany
Other versions Profile DA05/1: Robust design in a metal housing Hollow shaft, max. Ø 20 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Attenuated counter system Fine setting for correction of dimensions Reversible counting direction
Request for a quoteSIKO GMBH
Germany
Basic device with 4 decades Profile DA04: Hollow shaft, max. Ø 14 mm Counter with 4 decades and fine reading Detent as an option Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof Clamping plate (see accessories)
Request for a quoteSIKO GMBH
Germany
Very small design Profile DA02: Ultra-small design Hollow shaft with max. Ø of 10 mm Minimum axle base of 19 mm Counter can be designed for “mm” or “inch” Stainless-steel driving shaft as an option
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The Type 2040 an visual and electronic position indicator for mounting on pneumatic valves with linear or rotary actuator is characterized by a compact design, the possibility to identify the valve position via switch contacts. The various configurations and diagnostic function can be managed via the standard Schubert & Salzer PC Software "DeciveConfig".
Request for a quoteSIKO GMBH
Germany
Combined analog-digital position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Counter with 5 decades. Special scales, also for small numbers of pieces. Dustproof or oil-filled versions.
Request for a quoteNORELEM FRANCE
France
Bearing block and carriage aluminium alloy, anodised. Guide columns stainless steel, ground. Spindle stainless steel, rolled thread. Guide bearing maintenancefree. Position indicator plastic. Version Radial play on guide < 0.02 mm. No axial backlash. Spindle selflocking, with additional lock. Note Due to the practically playfree guides and absolutely playfree spindle, loosening or clamping of the spindle is not required during adjustments. Digital position indicators with 0.1 mm display accuracy, digits increase with right rotation. The display value of the position indicator can be adjusted by turning the carrier ring. The mounted position of the position indicator can be set in 4 positions with a screw. Within the respective sizes, the positioning stages can be easily combined using the modular principle. Drawing reference Assembly position of position indicator a) top (standard) b) right c) bottom d) left
Request for a quoteSIKO GMBH
Germany
Easy Touch Control ETC5000 is the plug + play basis for a complete format adjustment system. The intuitively operated control systems of ETC5000 is designed to control up to 31 bus-compatible position indicators or actuators. Whether monitored format adjustment via digital position indicators or fully automated format adjustment via actuators –The system provides you with the flexibility you need. Control system for position indicators and actuators. Intuitive touchscreen control concept for format adjustment. Up to 31 devices can be actuated. Single or set positioning. RS485 and USB interfaces.
Request for a quoteHERMA GMBH
Germany
Powerful and sturdy side labeling system: The 362E two-sided labeling machine lets you label up to 200 products per minute. Fast, durable, compact & excellent price-performance ratio. A multitude of optional extras are available, and the machine can be fitted with a PLC controller with a very clear and easy-to-configure operator panel . Two high-performance applicators ensure a high output, even during continuous operation. The design means that no guards are required, which saves space. However, the enclosed stainless-steel base makes the labeling machine extremely stable. Handwheels with digital position indicators let you reproduce your optimum settings at all times. The labeling machine can be converted for wrap-around labeling in no time flat. The missing label check and product ejection features make the 362E fit for particularly demanding tasks.
Request for a quoteResults for
Position indicators- digital - Import exportNumber of results
37 ProductsCountries
Company type