Results for
China
Form: Granule; Compositon: 20%, 30%, Up To 60% Glass Reinforced PEEK; Feature: Low Viscosity; Application: Injection Moulding.
Request for a quoteChina
Form: Granule; Feature: The surface resistivity is uniform and controllable to meet the conventional requirements of 105-8 Ω/m2.; Application: Extrusion. Different formulas may be provided based on to different application requirements.
Request for a quoteChina
ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite High performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical strength and high dimensional stability. The long term service temperature range of PEEK Rod is from -30°C to 250°C and has a short term maximum service temperature of 310°C. This compression moulded material is a PEEK polymer modified with 10% each of carbon fibre, graphite and PTFE for improved sliding and wear properties. Product characteristics including excellent sliding and abrasion resistance, high mechanical strength and high dimensional stability.
Request for a quoteChina
ARKPEEK-GF30: 30% Glass Fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature onditions. This is a special 30% glass filled PEEK modification that PEEKChina manufactures under the name PEEK GF30 natural. In comparison to unfilled PEEK, this glass fibre reinforced material exhibits increased mechanical strength and high rigidity. Furthermore, improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions. As glass fibres tend in some cases to have a marked abrasive effect on mating surfaces.
Request for a quoteTurkey
GMY Master Polymer In the polymer industry, we produce masterbatch at rates ranging from 20% to 60% based on customer demand. The substance that is used to produce black masterbatch, which has a structure known as paracrystalline or semi-crystalline, where carbon cannot fully crystallize, is referred to as carbon black. It is obtained in the form of soot through the incomplete combustion of various materials, ranging from heavy petroleum products to agricultural oils. Carbon black is utilized in several industries. For instance, food manufacturers use carbon black (E152) extracted from agricultural sources as a coloring additive. Its excellent conductivity properties make it suitable for use in the electrical industry. The car wheel industry relies heavily on carbon black for its reinforcing effect on rubber.
Request for a quoteChina
PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite
Request for a quoteChina
ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical strength and high dimensional stability. The long term service temperature range of PEEK Rod is from -30°C to 250°C and has a short term maximum service temperature of 310°C.
Request for a quoteChina
Form: Granule; Compositon: 100% PEEK Resion; Feature: ARK8100G High Viscosity, ARK8100G-S Medium Viscosity; Application: Extrusion.
Request for a quoteChina
ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fibre reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values.
Request for a quoteChina
ARKPEEK-GF30: 30% Glass Fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. Improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions.
Request for a quoteChina
ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fibre reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values.
Request for a quoteTurkey
Canes Polymers is one of Turkey's leading industrial plastic manufacturers. Our company specializes in the production of sustainable quality industrial products. With 30 years of experience in the plastic sector, we combine advanced technology and comprehensive chemical knowledge to provide unique solutions to our customers. Canes Polymers is the first and only company in Turkey to provide product manufacturing according to process. We offer a wide range of products including technical compounds, filler masterbatches, additive masterbatches, polyethylene, polypropylene, polystyrene carrier compounds, and recycled polyethylene granules. Additionally, we serve as a supplier of original raw materials and chemical products within the industry. Our mission at Canes Polymers is to meet the needs of our customers by delivering the highest quality products and achieving mutual success through collaboration.
Request for a quoteChina
ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical strength and high dimensional stability. The long term service temperature range of PEEK Rod is from -30°C to 250°C and has a short term maximum service temperature of 310°C.
Request for a quoteChina
Form: Granule; Feature: Electrical Insulation and Extremely High Voltage; Application: Extrusion & Injection Moulding; Customized: Yes and contact for material solution.
Request for a quoteChina
Form: Granule; Feature: Heat Insulation and Low Thermal Conductivity; Application: Extrusion & Injection Moulding; Customized: Yes and contact for material solution.
Request for a quoteChina
Form: Granule; Compositon: ARK-HE610-10% PTFE + 90% PEEK, ARK-HE611-20% PTFE + 80% PEEK Feature: Wear-resistant and self-lubricating. Application: Injection Moulding.
Request for a quoteChina
Form: Granule; Feature: The surface resistivity is uniform and controllable to meet the conventional requirements of 105-8 Ω/m2.; Application: Injection Moulding. Different formulas may be provided based on to different application requirements.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
China
Form: Granule; Compositon: Custom Glass Fiber Reinforced PEEK; Feature: High Mechanical Strength; Application: Injection Moulding.
Request for a quoteChina
Form: Granule; Compositon: 20%, 30%, Up To 60% Glass Fiber Reinforced PEEK; Feature: Standard Viscosity; Application: Extrusion & Injection Moulding.
Request for a quoteChina
Form: Granule; Compositon: 20%, 30%, Up To 50% Carbon Reinforced PEEK; Feature: Low Viscosity; Application: Injection Moulding.
Request for a quoteChina
Form: Granule; Compositon: 100% PEEK Resion; Feature: Standard Viscosity; Application: Film Manufacturing & Injection Moulding.
Request for a quoteChina
PEEK materials offer outstanding performance in extreme conditions, making these materials some of the best performing thermoplastics in the world. They offer strength, stiffness, long-term fatigue, and other properties that set them apart from other materials. Extraordinary temperature-, chemical-, and electrical temperature-resistance help PEEK materials endure in harsh conditions. Additionally, they have excellent high-temperature performance, with glass transition temperatures ranging between 289°F – 324°F and melting temperatures between 649°F – 729°F. PEEK materials also offer very good resistance to chemicals like dilute acid, dilute alkalis, oils and greases, aliphatic hydrocarbons, aromatic hydrocarbons, and halogenated hydrocarbons
Request for a quoteChina
ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. Composite material with PEEK matrix for parts with high structural characteristics Carbon PEEK is a composite material reinforced with carbon fiber, with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. The addition of carbon fiber makes the material even more resistant from a mechanical point of view and allows you to go further in the Metal Replacement process even in the most extreme industrial sectors. Carbon PEEK finds application in a wide range of industrial sectors. It is used in very specific areas where a further increase in mechanical performance is required for out-of-the-ordinary performance.
Request for a quoteChina
PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite
Request for a quoteChina
Introducing our CF/PEEK filament, a game-changing material designed specifically for 3D printing. This cutting-edge filament combines the exceptional mechanical properties of carbon fiber (CF) reinforcement with the outstanding performance of Polyetheretherketone (PEEK) polymer. The result is a high-performance composite material that revolutionizes the capabilities of 3D printing technology. Our CF/PEEK filament offers a unique combination of strength, stiffness, and heat resistance, making it ideal for demanding applications across a wide range of industries. The incorporation of carbon fiber reinforcement significantly enhances the mechanical properties of the printed parts, providing exceptional strength-to-weight ratio and rigidity. This allows for the creation of lightweight yet structurally robust components.
Request for a quoteChina
ARKPEEK-GF30: 30% Glass Fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. Improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions.
Request for a quoteChina
ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fibre reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values.
Request for a quoteChina
ARKPEEK-GF30: 30% Glass Fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. Improved creep strength and dimensional stability are achieved by this glass filled PEEK. These properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions.
Request for a quoteChina
ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical strength and high dimensional stability. The long term service temperature range of PEEK Rod is from -30°C to 250°C and has a short term maximum service temperature of 310°C.
Request for a quoteResults for
Polymers - Import exportNumber of results
277 ProductsCountries
Company type
Category