Pneumatic series - Import export

H guide unit for pneumatic cylinders ISO Ø25 to Ø125 Very sturdy guide on plain bearings Protected by wipers seals Guide unit with large rods This Heavy Series has bigger guide rods than the Strengthened series. The thick front plate also allows long centering of the guide rods for better resistance to torsion. Only available in plain bearing version, it’s recommended for important radial loads in static. Sturdy guide for Ø125 cylinder Adapted to the ISO6432 (Ø25) and ISO15552 (Ø32 to 125) cylinders, this range therefore also makes it possible to meet the more robust guide needs for Ø125 cylinders, the guide rods then being Ø40, on 4 plain bearings. Anticorroding heavy guide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and front plate are remaining in anodized aluminum (suffix /AC after the reference). Scrapers in polyurethane can be proposed for dusty or dirty environments.

U guide unit for pneumatic cylinders ISO Ø32 to Ø80 Short guide on bronze bearings Protected by wipers seals Short guide for ISO15552 pneumatic cylinder This Classic Series provides antirotation of the cylinder rod. The guide is shorter than the H Classic series and is only available in plain bearings, so this series is recommended for low strokes and moderate loads. Anticorroding Uguide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series. Protection kit and back stop kit on Uguide The protection kit (tube wrapping the rods at the rear of the guide), for example allows to avoid a guarding housing on a semiautomatic machine (label maker …). The back stop kit, with hydraulic shock absorber, allows

In particular applications, it can be necessary to hold high axial forces and torque at the same time. For pneumatic operation, our Locking Unit series KFPD meets this demand. Depending in the size, forces / torques of 12 kN / 120 Nm or 30 kN / 500 Nm can be held securely. The “normal” SITEMA Locking Units KFH are already able to hold smaller torque. Example: 280 Nm with, at the same time, an axial holding force of 100 kN on rod diameter 56. In case higher torque needs to be held, SITEMA’s special design series KFHD can help. With this design, it is possible to hold torque with a factor of 10 higher compared to the standard KFH unit. Example: 2800 Nm with, at the same time, an axial holding force of 100 kN on rod diameter 56. Whether the operation is pneumatic or hydraulic, the application is limited to static holding. The KFPD and KFHD can prevent a rotation from starting, but are not suitable to brake rotating masses.

Pneumatic nailer PL 88 SJ with clencher standard for staples series 88. Section 0.50 x 1.25 mm., Width 12 mm., Length from 12 to 25 mm. USES: Model with clencher for manufacturing mattresses, closing cardboard boxes, cardboard packaging production, fixing foam.

Pneumatic nailer PL 110 SJ/LJ with clencher for staples series 110. Section 0.65 x 1.60 mm., Width 11.7 mm, length from 12 to 25 mm. USES: Model with clencher for manufacturing mattresses, closing cardboard boxes, cardboard packaging production, fixing foam. Available models: OM PL 110 SJ model with short clencher, max distane form edge 60 mm OM PL 110 LJ model with long clencher, max distance from edge 140 mm

Pneumatic stapler for staples Series WS/16WC, with firing hammer, section 1.40 x 1.60 mm., width 22,2 mm., length from 15 to 38 mm. Special model with hammer firing. Normally, after each shot, you have to release the trigger to shoot another clip; in this case it is not necessary, so just hold down the trigger and the shot will be made as soon as the stapler will be in contact with a flat surface. Uses: Assembling of furniture and cabinets, construction of frames for doors and windows, wood interior trim, cornices, waterproofing and insulating homes, hardwood floors, vinyl siding and aluminum, attack with springs in upholstery, production of wooden signs, drawers, backs of boxes, grids. Both models, as an accessory, can be equipped with a long arm to fix the cardboard in the bottom of the case.

Pneumatic stapler for staples Series 92, section 1.00 x 1.25 mm., width 6,4 mm., length from 9 to 40 mm. Uses: Assembling of furniture and cabinets, construction of frames for doors and windows, wood interior trim, cornices, waterproofing and insulating homes, hardwood floors, vinyl siding and aluminum, attack with springs in upholstery, production of wooden signs, drawers, backs of boxes, grids.

The stapler SERIES MPK are designed for the closure of the sides of the cartons and the construction of trays and containers. Available in mechanical version (mod. M), pneumatic (model B) and stitched at 45° (K). These staplers are suitable if you need to prepare packages in different areas and in small quantities. When you need to close 50 to 100 packages it is advisable to use a pneumatic stapler. The models use MPK points series 16B coppery length 12,15,18 mm (charger 300 points). On request it is available the model that uses the series 35 points coppery length 15,18,22,24 mm, charger 200 points). The length of the arm varies from 340 mm to 1000 mm depending on the model.

Pneumatic staplers for staples series 84, section 0.65 x 0.95 mm., Width 11 mm., Length from 4 to 14 mm. Uses: footwear industry, production and finishing furniture, frames, backs of cabinets, seats for boats (stainless steel), wooden objects, sunshades, interiors of cars in wood and vinyl, basis for upholstery, construction of doors and windows, isolation felt, exhibitions.

PPF SERIES: PNEUMATIC FILLERS FOR CREAMS AND SAUCES STAINLESS STEEL AISI 304 - easy washable Volumetric dosing with pneumatic operation series PPF for the dosing of sauces and creams. Stainless steel AISI 304 construction with column for floor installation and adjustable support. Easy use and cleaning idael for small workshops and frequent variations in production. Designed for dispensing food products, chemicals, cosmetics, pharmaceuticals, etc. Available in five models with capacity max. 250 ml. - 500 ml. - 1000 ml. - 2000 ml - 5000 ml. The internal volume of the hopper is approximately 25-30 liters depending on the model. The dispenser is equipped with an adjustable work surface with a maximum height of mm. 500. To obtain a suitable working height to maintain a correct position during the dosage it is advisable to purchase the stainless steel support with feet.

Pneumatic staplers for staples series 80,section 0.65 x 0.95 mm., Width 11.4 mm., Length from 4 to 25 mm. USES: footwear industry, production and finishing furniture, frames, backs of cabinets, seats for boats (stainless), wooden objects, sunshades, interiors of cars in wood and vinyl, basis for upholstery construction of doors and windows, isolation felt, exhibitions, sewing of bags. Models available: 80.16 standard for staples from 4 to 16 mm 80.16 S with contact safety device for clips from 4 to 16 mm 80.25 standard for staples from 4 to 25 mm Delivery: The standard models are usually in stock. We try to keep up to date availability but, given our many sales channels, for urgent deliveries please contact us.

Pneumatic stapler for staples Series S4, section 1.40 x 1.60 mm., width 9,3 mm., length from 20 to 63 mm. Uses: Assembling of furniture and cabinets, construction of frames for doors and windows, wood interior trim, cornices, waterproofing and insulating homes, hardwood floors, vinyl siding and aluminum, attack with springs in upholstery, production of wooden signs, drawers, backs of boxes, grids. Models available: S4.38 B - for staples up to 38 mm - bottom loading S4.50 - for staples up to 50 mm - standard S4.65 - for staples up to 65 mm - standard

PNEUMATIC NAILERS FOR HEAVY STAPLES S29, section 2.10 x 1.80 mm, width 22.9 mm, length from 75 to 160 mm. USES: fixing insulation panels in the construction field. Available models: S29.130 model for staples with length from 65 to 130 mm. S29.160 model for staples with length from 65 to 160 mm.

Pneumatic stapler for staples Series 90, section 1.00 x 1.25 mm., width 3.5 mm., length from 9 to 40 mm. Uses: Assembling of furniture and cabinets, construction of frames for doors and windows, wood interior trim, cornices, waterproofing and insulating homes, hardwood floors, vinyl siding and aluminum, attack with springs in upholstery, production of wooden signs, drawers, backs of boxes, grids. Models available: 90.16 - for staples up to 16 mm - standard 90.28 - for staples up to 28 mm - standard 90.32 - for staples up to 32 mm - standard

Working range Blind rivets above 6,4 mm Ø all materials and lockbolts up to10 mm Ø with corresponding pulling heads Technical data Weight: 3.4 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 6.9 ltr. per rivet Traction power: 50.000 N at 7 bar Stroke: 15 mm Equipment 1 hydraulic oil bottle 100 ml 1 oil refi ll can Operating instructions with spare parts list

Working range Sets blind rivets up to 5 mm Ø all materials and up to 6 mm Ø alu/steel (max. mandrel dia. 3.2 mm) Technical data Weight: 1.6 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2,3 ltr. per rivet Traction power: 11.000 N at 6 bar Stroke: 18 mm Equipment Nosepieces:17/27, 17/29, 17/32 and 17/36, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml,1 oil refi ll can, operating instructions with spare parts list

The TAURUS® 2/K has been designed for setting plastic rivets. In its functionality the TAURUS® 2/K is identical to the standard tool, however has a stroke of 24 mm instead of 18 mm. Plastic rivets only need a low setting force, however, normally require large setting strokes due to the toughness of the plastic material. The TAURUS® 2/K allows to safely set plastic rivets with only one setting stroke! The TAURUS® 2/K comes with 3 nose pieces for plastic rivets 17/30 K, 17/35 K and 17/40 K included. Working range Blind rivets plastic from 4 up to 6 mm Ø. Nosepieces 17/30K; 17/35K; 17/40K Technical data Strength: 24 mm Tensile strength: 8,400 N

Working range Sets blind rivets up to 6.4 mm Ø all materials (max. mandrel dia. 4.5 mm) Technical data Weight: 1.9 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 4.8 ltr. per rivet Traction power: 18.000 N at 6 bar Stroke: 25 mm Equipment Nosepieces:17/36, 17/40 and 17/45, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, Operating instructions with spare parts list

Working range Blind rivets above 6,4 mm Ø all materials and lockbolts up to10 mm Ø with corresponding pulling heads Technical data Weight: 3.4 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 6.9 ltr. per rivet Traction power: 42.000 N at 7 bar Stroke: 17 mm Equipment 1 hydraulic oil bottle 100 ml 1 oil refi ll can Operating instructions with spare parts list

The TAURUS® 2/AS is a special version of theTAURUS® 2 with a VAS slide switch which does not engage when in its highest position, thus achieving that vacuum absorption is automatically deactivated once the tool is not in use. This way, unintentional activation of the vacuum absorption with unnecessary air consumption can be effectively avoided.

As far as technology and functionality are concerned, the TAURUS® 2/24 is identical to the standard tool, however has a stroke of 24 mm instead of 18 mm. This tool provides the advantage of being able to safely set critical rivet Types requiring a large setting stroke with only one setting stroke without re-engagement. This applies, for example, to our BULB-TITE® or similar rivets. Working range Blind rivets up to Ø4 mm all materials, Ø5 mm steel; Ø 6 mm alu. Technical data Strength: 24 mm Tensile strength: 8,400 N

Working range Sets blind rivets up to 6.4 mm Ø all materials and up to 8 mm Ø alu (max. mandrel dia. 4.5 mm) Technical data Weight: 2.0 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 4.8 ltr. per rivet Traction power: 23.000 N at 6 bar Stroke: 19 mm Equipment Nosepieces:17/36, 17/40 and 17/45, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, Operating instructions with spare parts list

The pneumatic FRP-LX mixer series has been designed for easiest operation. Aluminum being the material of the housings and the adapters, it has a weight of only 6 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile agitator FRP-LX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers.

The GLP is a pneumatic top-entry series agitator that is used for homogenizing, dispersing, emulsifying and suspending in vessels and for viscosities up to 500 mPas for instance in wastewater treatment, chemical and cosmetics as well as in food industries. The agitator speed adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight. Power transmission via elastic coupling in the bearing housing. The agitator shaft has a double bearing in an aluminum housing separated from the drive. Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air, expanding in the air engine cools the agitator drive. Includes filters, pressure reducers with pressure gauge that indicates the secondary pressure. Available with a vessel clamp to fix the GLP on a drum.

FRP-LX - Lightweight mixer The pneumatic FRP-LX mixer series has been designed for easiest operation. Aluminum being the material of the housings and the adapters, it has a weight of only 6 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile agitator FRP-LX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers. Additionally we can provide you with a vessel clamp applicable for open lid drums.

GLP - Peumatic top-entry agitator The GLP is a pneumatic top-entry series agitator that is used for homogenizing, dispersing, emulsifying and suspending in vessels and for viscosities up to 500 mPas for instance in wastewater treatment, chemical and cosmetics as well as in food industries. The agitator speed adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight. Power transmission via elastic coupling in the bearing housing. The agitator shaft has a double bearing in an aluminum housing separated from the drive. Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air, expanding in the air engine cools the agitator drive. Includes filters, pressure reducers with pressure gauge that indicates the secondary pressure. Available with a vessel clamp to fix the...

U guide unit for pneumatic cylinders ISO Ø12 to Ø80 Antirotation guide on bronze bearings Protected by wipers seals Antirotation for ISO pneumatic cylinder This Light Series provides antirotation of the cylinder rod. With limited dimensions, it permits to use an ISO cylinder for shortstroke translations, while protecting the rod of the cylinder with its floating rod coupling. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series.

Features Pneumatic slit-laminar nozzle with uniform spray distribution throughout the entire spray pattern area. While multiple-nozzle alignment of conventional pneumatic spray nozzles leaves some spots unwashed, PSN nozzles provide uniform spray distribution and achieve a complete cleaning, leaving no spot unwashed. PSN can be used at a short distance. *1) Measured at compressed air pressure of 0.1–0.4 MPa (ca . 1 bar – 4 bar) and liquid pressure of 0.1–0.4 MPa (ca . 1 bar – 4 bar) for PSN nozzle with slit length of 1000 mm and slit opening of 0.05 mm. Applications Cleaning: Glass substrate, liquid crystal Cooling: Steel plates, moldings Moisture control: Paper, cardboard [Steel making industry] Surface finish process: Precision cleaning for steel surface treatment, Roll cleaning

Our high pressure valves of the JB- series are specially designed for the metered spraying of liquids with a high proportion of solids. The completely dead space free construction leads the medium directly past the valve seat. Deposits and blockages, as known from many spraying systems, are a foreign word to us at Jerko. Compact design with low maintenance - these are the valves of the JB series! Pneumatically actuated, the valves achieve the shortest response times. 15 million switching cycles without repair have been confirmed by a customer. The best valves for spraying systems - already in use thousands of times!