Results for
TIKIR MACHINE INDUSTRY
Turkey
For video : https://bit.ly/3rLexUi Automatic Casting Trolleys are especially preferred in iron and steel industry foundries. It is one of the transfer systems that provide high safety and efficiency during the casting of serial molds. It can regulate the line speed and work in accordance with the line speed. They are vehicles that can overturn the crucible (approximately 3500 kg) with a capacity of carrying 1.6 tons of molten steel at 110ᵒ degrees. They are specially designed according to the customer's line specifications. Tıkır Makina has been producing vertical and horizontal transfer systems for the industry since its establishment. It has the ability to produce conveyors, elevators, autonomous driverless forklifts and special design projects according to your needs.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Pneumatic control valve in flange design. The integrated positioner Type 8049 offers a compact design. All wetted parts are made of stainless steel. Flanges acc. DIN EN 10921 Flanges acc. ANSI #150 Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version …
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The flanged valve with pneumatic actuator and body made of gray cast iron or spheroidal graphite iron in installation length and flange pattern according to DIN. Limit switch Pilot valve Manual override version with pressure relief
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Pneumatic control valve with angle seat design. The integrated positioner type 8049 means that a compact design is achieved. All parts that come into contact with the medium are made from stainless steel. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version …
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Pneumatically operated angle seat valve is the extremely reliable allrounder in valve technology and is predestined for very high switching capacities. In stainless steel design for neutral and aggressive media but also for a wide range of temperature applications suitable. The angled seat design offers a high flow rate. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Limit switch Pilot valve Manual override . . . Stainless steel Bronze Brass Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Version with approval according to DIN 161 Degreased version, Silicon or PTFEfree version …
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The sliding gate control valve type 8043 in long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. Due to the direct and backlashfree installation of the positioner on that piston actuator, these valves have no exposed moving parts and are characterized by a high control quality and control dynamics. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Metal bellows Limit switch Position feedback Pilot valve . . .
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Miniature indicator with pressure connection M5 for visual indication of pressure.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Miniature indicator with pressure connection M5 for visual indication of pressure.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Indicator with pressure connection M5 for visual indication of pressure.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Indicator with pressure connection M5 for visual indication of pressure.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The pneumatic sliding gate control valve type 8028 in reinforced GS3 design with integrated positioner and with an 80 mm diaphragm actuator is ideal for compact plant installations in process technology. In addition to the compact design, this valve is characterised by high control precision and a long service life. Digital positioner type 8049 Positioner type 8049 in explosionproof version Positioner with integrated process controller type 8049 IPC Metal bellows Limit switch Position feedback Pilot valve . . .
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The hightemperature sliding gate control valve type 8024 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can be precisely controlled even in the hightemperature range. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve . . .
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The high temperature sliding gate valve type 8023 in reinforced GS3 design with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can be precisely controlled even in the hightemperature range. Moreover for high speed and cycling applications this valve is a clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The sliding gate control valve type 8021 with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled.Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve . . .
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Pneumatic right angle valve for high cycle applications and compact installations. In stainless steel suitable for neutral and aggressive media but also for a wide range of temperature applications. Whitworth pipe thread NPT thread Limit switch Pilot valve Manual override . . . Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Degreased version, Silicon or PTFEfree version …
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Pneumatic actuated threeway valve with an integrated positioner for demanding applications. Due to the stainless steel design suitable for neutral and aggressive media Whitworth pipe thread NPT thread Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Different control functions such as distributing and mixing function Low temperature version Degreased version, Silicon or PTFEfree version …
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Pneumatic actuated threeway valve for neutral media made from bronze, perfect fit for high cycling applications. Whitworth pipe thread NPT thread Limit switch Pilot valve Manual override . . . Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator
Request for a quoteTEKNOMASYON
Turkey
-Pneumatic cylinders -Solenoid, Pilot, manual and mechanical operated directional control valves -Flow control valves -ISO and Micro valves -Pneumatic hoses -Air treatment units -Piston operated valves and pulse solenoid valves -One touch plastic - metal - stainless steel fittings -Pneumatic accessories
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread - Thread G2 for manual override - Chambered O-ring - Sealing: NBR - Material: brass nickel plated, Al black anodized - Allowable medium: air - Temperature range 14 to 158 °F (-10 to +70 °C) - Working pressure range 14,5 to 145 psi (1 to 10 bar) - Nominal flow rate measured when throttle is open at 87 psi (6 bar) and 14,5 psi (1 bar) pressure drop between inlet and exhaust
Request for a quoteARBESAN ENGINEERING IMPORT AND EXPORT LTD
Turkey
CP Pneumatic Actuators are suitable for 90-deagree opening and closing of Butterfly Valves
Request for a quoteResults for
Pneumatic and hydropneumatic equipment - Import exportNumber of results
23 ProductsCountries
Company type