Plunger pumps - Import export

The pumps of the 3 series deliver operating pressures up to 250 bar and volumetric flow rates of up to 400 l/min and are the preferred choice in channel and tube cleaning applications.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids.

The ARP (Abrasive Resistant Pump) series was developed specially for the conveyance of water contaminated with grainy or fibrous solids. The ARP highpressure pumps deliver operating pressures up to 400 bar. The pumps also work reliably at a solids concentration of up to 3,000 mg/l and a grain size of up to 300 μm.

The highpressure pumps of the 2series with operating pressures up to 750 bar and volumetric flow rates up to around 230 l/min are ideal for cleaning pipes and tube bundles, containers and containers.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids. The 2series impresses with a good price/performance ratio due to long service lives – even in rough everyday work.

With operating pressures of up to 1,000 bar, the Yseries pumps are ideally suited to a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning. Due to the small size and low weight, they can be easily installed in unit with very small base frames.

The highpressure pumps of the Z series deliver operating pressures up to 1,500 bar. With a high number of pressure and nominal flow rate combinations, the pumps are preferably used in industrial cleaning, paint stripping and also in descaling.For pumps with an operating pressure of more than 1,000 bar, hard metal plungers are used, which are particularly stable in order to guarantee a long service life and thus low maintenance costs.

With the builtin central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. The carbide plungers used are extremely robust, provide long service life at very high pressures of up to 3,000 bar, and can therefore guarantee low maintenance costs. This makes the pumps of this WOMA series ideal for separating, disassembling, stripping and derusting with high pressure water.

Performance in a small space Our compact K100-3 high-pressure three-plunger pump boasts impressive performance data: With only 15 kW of input power, it delivers a pressure of 2000 bar, making it one of the most powerful pumps in its size class. The K100-3 triplex plunger pump really comes into its own when it comes to water jetting for industrial high-pressure cleaning.

K25000-3G high-pressure triplex plunger pump for 24/7 operation, pipeline tensioning and leak testing of tanks and various pipelines. The K25000-3G is used internationally hundreds of times as a high-pressure pump in hydraulic face construction. With a power of 250 kW, a gearbox with forced lubrication and an optional oil cooler, the pump is perfectly suited to the demands of 24/7 mining operations. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on pumped liquid - Speed range 10-100% depending on rod load - Dynamically balanced gearbox - Forced lubrication gearbox (> 160 kW with oil cooler) - Standard gear ratios i = 3.33 - 3.50 - 4.04 - 4.62 - 5.44 - Can also be operated vertically - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request

With 110 kW, the K11000-3G high-pressure pump is a powerful plunger pump that is mostly used in intermittent operation. The reason for this is that this KAMAT high pressure pump has splash lubrication and not oil pressure lubrication. This makes the pump more suitable for intermittent operation, but it is extremely robust and can therefore be used in continuous operation even at 110 kW. Classic applications for this pump are industrial cleaning, blasting and process engineering. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on pumped liquid - Speed range 10-100% depending on rod force - Dynamically balanced gearbox - Splash lubricated gearbox - Standard gear ratios i = 3,00 - 3,14 - 3,39 - 3,76 - 4,13 - 4,50 - 4,93 - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils etc. on request, oils etc. on request

The K18000-3G triplex plunger pump has forced lubrication, making it ideal for continuous operation. Its main application is industrial cleaning. For large ship areas it is advisable to combine the pump with the Magnet Crawler (Ship Hull Crawler) from the Gekko range. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature. - Minimum inlet pressures dependent on fluid being pumped - Speed range 10-100% depending on rod force - Dynamically balanced gearbox - Forced lubrication gearbox (> 130 kW with oil cooler) - Standard gear ratios i = 3,00 - 3,14 - 3,39 - 3,76 - 4,13 - 4,50 - 4,93 - Can also be operated vertically - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request

High-Pressure Cleaning, Load Change Systems and Pressure Test Systems If your application requires forced lubrication and an oil cooler may be required, the powerful K9000-3G three-plunger high-pressure pump is an alternative to the smaller K8000-3G three-plunger high-pressure pump. Like the compact K8000 model, this 90 kW high-pressure pump is suitable for smaller industrial applications such as industrial cleaning, jetting or process engineering. SPECIAL FEATURES - Capacities at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on fluid - Speed range 10-100% depending on rod force - Forced lubrication gearbox (> 75 kW with oil cooler) - Standard gear ratios i = 2.75 - 3.22 - 3.68 - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request - Vertical operation possible

KAMAT's K4500-3 three-plunger high-pressure pump is a powerful pump that is ideal for a wide range of industrial cleaning applications, water steel cutting, pressure testing, surface removal and machining. Modularity for customisation, also as a process pump With an output of 45 kW, the K4500-3 is the entry-level model in the proven KAMAT modular system. The modular design not only allows the use of different pump heads, but also adaptation to different operating pressures and pumped media. As a process pump, it can even handle fluids with viscosities up to 2000 mPas. SPECIAL FEATURES - Flow rate data at 100% volumetric efficiency - and 20°C ambient temperature - Minimum inlet pressures depending on pumped liquid - Speed range 10-100% depending on rod force - Gearbox with splash lubrication - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc.

Pumps without upstream pressure: The Quintuplex K55000-5G plunger pump as a 550 kW high-pressure pump with five cylinders for direct as well as indirect hydromechanical descaling, mining and concrete rehabilitation. With five cylinders, the K55000-5G is one of our extremely powerful high-pressure pumps. Its special feature is that it has five cylinders that are precisely calculated and matched to each other: Thus, the K55000-5G achieves high performance without cavitation and with very low residual pulsation. It is even capable of pumping up to 640 l/min without upstream pressure. SPECIAL FEATURES Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 10-100% depending on rod force Gear dynamically balanced Gearbox with forced lubrication and oil cooling gear ratios i = 3.30 - 3.95 - 4.66 - 5.63 Also available to API 674, including vertical operation Special fluids such as seawater, glycol, methan

Innovacera ceramic valveless pump is widely used for many famous brand filing machines. We can make customized shapes and sizes of the ceramic filling pump according to the client’s design requests. Valveless Ceramic Plunger Pump Assembly Product Application: Important parts of experimental equipment, analyzing equipment, and pharmaceutical equipment for the rationing of materials or successive transportation. Widely applied to precision quantitative filling of industries such as medicine, pharmacy, food, chemistry, cosmetics, etc. Used for precision quantitative filling of liquids such as blood, biological reagent, oral liquid, injection liquid, senior cosmetics, fragrances, fungicides, etc. Used for precision quantitative filling of all kinds of acid and alkali corrosive liquid.

Working at high pressure and high volume flow with the KAMAT Triplex plunger pump K45000-3G: particularly suitable for pressure tests of containers, pipeline stressing and pipeline testing. The K45000-3G focuses on hydraulic applications and jetting. In jetting, the 450 kW high-pressure plunger pump is often installed in large mobile systems. The K45000-3G plunger pump is particularly suitable when high litre capacities are to be realised at high pressure. SPECIAL FEATURES - Flow rates with 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on fluid - Speed range 10-100% depending on rod force - Dynamically balanced gearbox - Forced lubrication gearbox with oil cooler - Standard gear ratios: i = 3.39 - 4.05 - 4.76 - 5.25 - Also available according to API 674, can also be operated vertically - Special media such as seawater, glycol, methanol, oils, etc. on request

Hydraulic and pneumatic cylinders, Presses, Shock absorbers, Fittings, Controls, Piston and plunger pumps, Mobile hydraulics, Injection units

Hydraulic and pneumatic cylinders, Presses, Shock absorbers, Fittings, Controls, Piston and plunger pumps, Mobile hydraulics, Injection units

With a maximum drive power of 1000 kW, the K100000-5G high pressure pump is an extremely powerful pump. As a five-cylinder pump (quintuplex), it offers the possibility of pumping without inlet pressure in many applications. Its special five-cylinder design allows high flow rates without cavitation in the pump. Like its smaller counterpart, the K55000-5G, it is used for larger jetting or hydraulic applications. Special Features Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 10-100% depending on rod force dynamically balanced gear Gear unit with forced lubrication and oil cooling gear ratios i = 3.40 - 4.10 - 4.69 - 5.19 - 6.03 Also available to API 674, including vertical operation Filtration up to 350 µm Special media such as seawater, glycol, methanol, oils etc. on request

INNOVACERA is good at yttria stabilized zirconia. Unlike other ceramic materials, zirconia is a material with very high resistance to crack propagation. Zirconium oxide ceramics also have very high thermal expansion and are therefore often the material of choice for joining ceramic and steel. > high fracture toughness > thermal expansion similar to cast iron > extremely high bending strength and tensile strength > high resistance to wear and to corrosion > low thermal conductivity

Innovacera ceramic metering pump is widely used for many famous brand filing machines. We can make customized shapes and sizes of the ceramic filling pump according to clients’ design requests. This kind of ceramic piston and plunger is widely used for Lithium battery single head/double head /four head electrolyte liquid filling machines.

Extremely high flow rates with the UHD K150000-5G quintuplex plunger pump - ideal for fracking and descaling. With a maximum drive power of 1500 kW, the K150000-5G high pressure pump is an extremely powerful high pressure pump. As a five-cylinder pump (quintuplex), it offers the possibility of pumping without inlet pressure in many applications. Its special five-cylinder design allows large volume flows without cavitation in the pump. Special Features: Flow rate based on 100% volumetric efficiency and 20°C ambient temperature Min. inlet pressure dependent on fluid Speed range 0-100% depending on rod force dynamically balanced crankshaft Gearbox with external forced lubrication and oil cooling External gear ratios on request e.g. i = 4.76; 5.72; 6.3 Also available to API 674 Horizontal operation Special fluids such as seawater, glycol, methanol, oils, etc. on request.

Zirconia Ceramic Plunger Waterjet Cutter Innovacera develops many kinds of Zirconia ceramic parts for all kinds of pumps & valves . Such as waterjet zirconia ceramic plunger for severe service and high pressure systems . Waterjet intensifier ceramic plunger for water jet is used on 60k ultra high pressure intensifier waterjet pump 50HP, 60HP,100HP, 40KPSI, 60KPSI. The max pressure it undertake can be 60 kpsi , voltage 220v/380v. Innovacera Waterjet Ziconia Ceramic Plunger Features: > Mirror polished > High pressure resistant > Wear and corrosion resistant > Long Service Life & improve seal life > Good toughness and fracture strength > 10 years expertise in manufacturing zirconia pump components for OEMs Waterjet Ziconia Ceramic Plunger Size Specifications: - 22.22*207mm - 22.22*318mm - 22.22*236mm

Versatile, turnkey diesel high-pressure pumping units Special applications require customised high-pressure systems, which KAMAT can provide from the initial project idea through to turnkey installation, with 100% of the manufacture taking place in-house. Depending on the application, our customers can choose from a range of drives, power transmission components, PLC controls, measuring systems, data transmission, remote controls, pneumatic and electric valve controls, chassis and sound insulation. However, the units are ready for use on the base frame on which they are delivered. KAMAT diesel-powered units are traditionally used in industrial cleaning and pressure testing, mining and water hydraulics, but special solutions for special fluids or to meet explosion protection requirements are also part of the KAMAT range. It makes no difference whether the customer requires a mobile or stationary unit.

INNOVACERA is a professional manufacturer of ceramic metering pump. The material we made for ceramic plunger pump is 99% alumina and zirconia, made by CIP forming and then with precision processing.Our business expanding in high-tech filling solutions for precision liquid filling in 2015, offer high grade accuracy, precision and durability. They are utilized in a broad range of Medical, Laboratory, Analytical and Industrial Process applications. All our ceramic filling pump products are Food Grade. There are three types of pump modules: Rotary, Linear and Multiplex which are used for different applications depending upon the customer's fluidic needs.

Multi-consumer valves distribute the output of the high-pressure pump evenly or as required to several high-pressure blasting tools. KAMAT offers two valves for this purpose: the mobile dual consumer control and the MVS4 multi-consumer control. When the consumer is opened, both controls open the valve and when the consumer is closed, the valve is closed. When all valves are closed, the controls switch off the pressure generation. The dual-user control is used to control one or two high-pressure consumers, such as high-pressure guns. The dual-user control is available with pneumatically or electrically controlled valves. The consumer and the high-pressure plunger pump have a corresponding control option. The dual consumer control and the consumer are connected by an electrical switch.

Filltech's most advanced pumping technology: High-end CO 2/N 2O pump designed for automatic redundancy and fail-over Highlights Intelligent interoperability with any Filltech filling station Optimized energy consumption Complete plug & Play system ready for instant connection Safe operation through intelligent monitoring: pressure, temperature, leakage Low noise emission Application ready: filling, dozing, transfer, supply Joint pumps for flow-rates up to 6 tons Remote operations: Monitoring, remote control, power control Technical Data Capacity: 400 - 1500 kg/h, 6-25 lpm, 1.7 -6.6 gpm Power supply: 3 x 400V / 50 Hz, opt 120 / 208V, opt. 277 / 480V/60Hz, 3-phase Power consumption: 1.5 to + 4 kW/h (dep. on pump size) Dimensions (LxWxH): 900 x 900 x 1670 mm / 35 x 35 x 66 in. Pump Triplex plunger pump NP 25/50 – 25/70 Motor: Belt drive Construction characteristics CO 2 supply: liquid from tank system Ring- or stub lines Automatic start cycle Pressure supply needed for valve: 8 b

ePTFE-Graphite Fiber with special Para-Aramid corners Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Form stable, wear resistant, heat conductive packing, can be used as bullring Highest pressure resistance, practically no gap extrusion For high pressure plunger pumps up to 1,500 bar as die formed rings Highest pressure resistance Safe and universal packing for abrasive media Precompressed rings are recommended for applications in plunger pumps Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 1500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Plunger pumps Gate valves Suitable for High pressure plunger pumps and similar applications Bull rings Form of delivery This packing can be...

Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Very form stable, Recommended shaft surface hardness: HRC 50 Good heat conductivity therefore reduced wear Extrusion resistant at bigger gaps, can also be used as bullring Ability to withstand high pressure Safe and universal packing for abrasive products Die formed rings are recommended Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 3 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application In all units with larger gap widths, or in solids containing media. Plunger pumps Fittings Gate valves Suitable for Further development as Trapez-Pack ® 12. Production in trapezoidal form and with special impregnation. This optimizes performance characteristics...