Plug play - Import export

Plug and Play Wireless Microphone with Charging Case Dual Microphone Clip On Mic for Phone/Laptop/Tablets

HAWKE Ex-connector InstrumEx's design allows the live mating and de-mating of signal and low power in hazardous areas safely and quickly. It is suitable for Ethernet applications and it can be installed into Ex d enclosures or Ex e junction boxes. Materials: Nickel-plated brass, Stainless Steel 1.4404, V4A, 316L Types of Protection: Ex db eb IIC, Ex tb IIIC Db T85 Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. 1-9 Pins Cross section from 0,14 to 2,5 mm² Maximum voltage 250 V Maximum power 10 Ampère Temperature range: -40 °C / +60 °C Protection grades IP66, IP67, Deluge Protected DTS01

The 501/RCG can be used for quick field connection of cables to equipment where historically hard wiring methods are used. This solution offers cost savings when carrying out essential inspectionand maintenance activities, including the capability to quickly swap out equipment on-site. Material: Nickel-plated brass Types of Protection: Ex II 2 GD, Ex eb IIC T6/T5 Gb, Ex tb IIIC T80°C/95°C Db Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. 4 or 6 Pins Cross section from 0,75 to 6,0 mm² Maximum voltage 300VAC/212 VDC Maximum power dependent on conductor size, max. 30 Ampère Temperature range: -60 °C / +60 °C Protection grades IP66, IP67, Deluge Protected DTS01

450mm three jaw standard power chuck with closed centre. made of a high-quality steel alloy. The hydraulic chuck's necessary parts are machined, and all of its components have been strengthened. Its design is extremely powerful and precise. Hydraulic mirrors from of the 2017 model new generation are constructed mainly in Turkey. The connection flange for the Standard Connection is ISO-A. It operates with all types of CNC workbenches. Plug and play Open center, suitable for bar feeder turning. Boxed, assembled, ready to use as a complete set. The mirror is shipped with soft feet. It is guaranteed for 1 year. (Except user error) Our products are 100% controlled. Each product is connected to the CNC workbench and controlled.

450mm three jaw standard power chuck with closed centre. made of a high-quality steel alloy. The hydraulic chuck's necessary parts are machined, and all of its components have been strengthened. Its design is extremely powerful and precise. Hydraulic mirrors from of the 2017 model new generation are constructed mainly in Turkey. The connection flange for the Standard Connection is ISO-A. It operates with all types of CNC workbenches. Plug and play Open center, suitable for bar feeder turning. Boxed, assembled, ready to use as a complete set. The mirror is shipped with soft feet. It is guaranteed for 1 year. (Except user error) Our products are 100% controlled. Each product is connected to the CNC workbench and controlled.

610mm three jaw standard power chuck with closed centre. made of a high-quality steel alloy. The hydraulic chuck's necessary parts are machined, and all of its components have been strengthened. Its design is extremely powerful and precise. Hydraulic mirrors from of the 2017 model new generation are constructed mainly in Turkey. The connection flange for the Standard Connection is ISO-A. It operates with all types of CNC workbenches. Plug and play Open center, suitable for bar feeder turning. Boxed, assembled, ready to use as a complete set. The mirror is shipped with soft feet. It is guaranteed for 1 year. (Except user error) Our products are 100% controlled. Each product is connected to the CNC workbench and controlled.

450mm three jaw standard power chuck with closed centre. made of a high-quality steel alloy. The hydraulic chuck's necessary parts are machined, and all of its components have been strengthened. Its design is extremely powerful and precise. Hydraulic mirrors from of the 2017 model new generation are constructed mainly in Turkey. The connection flange for the Standard Connection is ISO-A. It operates with all types of CNC workbenches. Plug and play Open center, suitable for bar feeder turning. Boxed, assembled, ready to use as a complete set. The mirror is shipped with soft feet. It is guaranteed for 1 year. (Except user error) Our products are 100% controlled. Each product is connected to the CNC workbench and controlled.

Standard luminaire，Standard with Power box（built-in Constant current power supply）, AC220V Plug-and-Play. Support no dimming/0-10V/DALI dimming. 25mm slender lighting surface. 100 Lm/w high light efficiency design, lumen output up to 1700 Lm/m. Multiple light distribution options (Diffuser , Microprism, Grating 30°, Grating 60°, Block frosted diffuser) to meet variety application requirements. Electric wire& suspension wire with two-in-one design, invisible and beautiful

Standard luminaire, Standard with Power box(built-in Constant current power supply), AC220V Plug-and-Play Support no dimming/0-10V/DALI dimming Up and down lighting design with suspension way, 25mm slender lighting surface . 100 Lm/w high light efficiency design, lumen output up to 3600 Lm/m . Multiple light distribution options(Diffuser, Microprism, Grating 30°, Grating 60°) to meet variety application requirements Electric wire& suspension wire with two-in-one design, invisible and beautiful

Features • The Plug & Play range includes three dowel sizes (ø 5, 6 and 8 mm) for the most common projects • The all-purpose wall plug Trika holds in almost all building materials • Perfectly matched screws for optimum wall plug function Contents: • 60x all-purpose wall plugTrika 5/31* + screws • 70x all-purpose wall plug Trika 6/36* + screws • 30x all-purpose wall plug Trika 8/51 + screws * only suitable for single-layer plasterboards

The semi-finished products manufactured by Embro GmbH are optionally available with an electrical connection. In addition to the many possibilities of placing different elements on carrier materials with special embroidery processes, Embro offers splicing or soldering techniques for perfect and cost-effective connections. The parts are crimped or soldered together as standard. The introduction of thermal switches, NTC or other cable solutions is also no problem. Special connector solutions can also be implemented. This means that the textile semi-finished products are plug & play ready upon delivery. #service #contacting #b2b

Flexible Polyester Heaters consist of a conductive ink between two insulation layers of polyester. The heater can be pressed on or fixed with a self-adhesive foil. Wrapped in PVC the use in liquids is possible as well. Typical standard applications are e.g. mirror heaters, water bed heaters, or low temperature room heaters. For terrarium and aquarium heaters we offer standard elements as well.

Attract attention with this slim and elegant advertising display. The durable, sleek metal housing in black or white gives this stand a timeless appearance. An integrated, professional display from Samsung offers easy "Plug & Play" commissioning via USB or content management via a LAN or WiFi connection.

▪ Intermittent recording and storage of one or two pressure signals ▪ Evaluation of pressure signals using previously defined limit curves/ranges (“teach in”) ▪ Easy and intuitive operation ▪ 5” colour touch screen ▪ Voltage signal processing (0 – 10 V) ▪ Compatible with flowplus16 and flowplus-SPT M6 ▪ Easy assembly (plug & play and start up) ▪ Data backup with USB stick possible

Plug and play, compatible with Windows 7 above, Mac OS, Android, can work with Skype, Zoom, GoToMeeting, Webex, Google Hangouts, face time, etc. 360 Omni-direction audio pickup

A simple solution to identify failure of a fabric filter baghouse, cartridge filters or cyclones. Ideally suited to applications from 0.1 mg/m³, it provides an immediate alarm in case of a filter break. • detects all dust types • relay alarm output • usable in clean gas and any metallic dust channels • very simple and fast retrofitting • immediate detection of filter damages • simple commissioning (plug & play) • excellent price/performance ratio

This space-saving Plug & Play system is preconfigured and ready to use. The Saphir Manual Station offers a multitude of uses and configuration possibilities. It can be operated as an individual work station or in semi-automatic mode and is equipped with quality components of Weber Ultrasonics.

Easy Touch Control ETC5000 is the plug + play basis for a complete format adjustment system. The intuitively operated control systems of ETC5000 is designed to control up to 31 bus-compatible position indicators or actuators. Whether monitored format adjustment via digital position indicators or fully automated format adjustment via actuators –The system provides you with the flexibility you need. Control system for position indicators and actuators. Intuitive touchscreen control concept for format adjustment. Up to 31 devices can be actuated. Single or set positioning. RS485 and USB interfaces.

The Dusty C has been specially developed to monitor clean sides after filters with high reliability and without time delay for filter breaks. It can be used in metallic ducts in which dust particles will be detected in the gas flow. Its area of application begins at dust levels of 0.1 mg/m3. • detects all dust types • can be used in all purge gas and dust ducts • immediate detection of filter damages • simple commissioning (plug & play) • can be used in ex zones • individual choice of alarm level • rapid and easy retrofitting

The X-ray inspection system Dylight guarantees extremely high levels of safety for your packaged food. This true ‘Plug and Play’ solution combines all functions in one compact unit. Extremely compact design Plug and Play: All functions in one unit Takes up only one metre of space in your production line Complete with separator and run-off container Maximum product safety thanks to the highest degree of detection sensitivity Intuitive, time-saving operation Easy installation and integration into networks

Muscular and skeletal problems are the most common reasons for people being unable to work, particularly if they have a job that frequently involves physically strenuous activity like pushing and pulling loads. The electric drive systems of the Blickle ErgoMove® series reduce these health risks considerably. The effort required for pulling and pushing is reduced by up to 100 %. The physical strain on the operator is decreased during internal material transport due to the considerably lower amount of effort required compared with manual operation. Equipment and transport units of any kind can be quickly and easily upgraded with a “plug & play” electric drive, steering and braking assistance. The modular sets include two fixed castors with electric drive, cockpit solutions with integrated controls and battery unit as well as all relevant safety features.

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

VisioPointer® reliably automates inspection processes in food packaging lines using leading vision technology and multiple inspection types. Its intuitive interface and intelligent data usage allow operators to ensure product quality, reduce waste and downtime, and optimize the production. As a plug and play vision solution, VisioPointer® makes thorough quality control achievable for any food manufacturer with easy implementation, operation and maintenance.

Improve process control with wide choice of spectral ranges and focus distances designed specifically for your application Reduce setup time with plug-and-play technology and integrated laser sighting Protect your process and employees with intrinsically safe ATEX/IECEx/CCC-IS certification Choose from options of analogue and digital communication protocols Designed for harsh environments, Thermalert 4.0 Series Pyrometers provide accurate, real-time temperature measurements for process control applications spanning metals, plastics, glass, oil and gas, food and more. This robust solution comes in a compact, integrated package that is easy to install and operate, so you can take your process control to the next level.The Thermalert 4.0 Series Pyrometers from Fluke Process Instruments include numerous integrated infrared temperature sensors with our widest selection of spectral ranges that can be used for a wide variety of process control applications.

PNEUMATIC CENTERING DEVICE WITH MOTORIZED ROLLERS (MOD. CP-FM) MANUFACTURERS VERSION Feeder - centering device useful for centering boxes max width mm. 650 and max weight kg. 50. Can be combined with automatic taping and labeling machines. The box centering machine mod. CP-FM consists of a motorized roller conveyor and two pneumatically operated side guides. The metal parts are painted with epoxy powder while the other components are galvanized. The pneumatic centering device with motorized rollers is a module for builders to be completed and adapted to an automatic line. It is available in two versions: Manufacturers version and "plug and play" version: In the "manufacturers" version, the centering device is supplied complete with: - Motorized roller conveyor with start and stop button and emergency mushroom, at a fixed speed of 15 meters / minute - Pneumatic tail lifts and compressed air system up to the gate movement management valve.

The Gecko Gripper (SP) enables the use of the innovative Gecko adhesive gripper technology in applications with a small surface area. Such areas which could not be automated so far. The gecko-inspired adhesive technology offers precise, track-free gripping. Even with porous workpieces this technology works. For example printed circuit boards or glossy surfaces. Cleaning is not necessary. The three different Gecko Single Pad Grippers (SP1, SP3 and SP5) are named after their payload in kilograms. Of course, the Gecko grippers can be used with leading lightweight robots and cobots. The compact single-pad design allows easy access to the workpiece, even in tight spaces. Since no electronics or air supply is required, the Gecko SP is a cost-effective plug-and-play solution. The Gecko gripper leaves no marks on glass. This eliminates the need for manual cleaning. This means a higher RoI and lower operating costs.

Whether you need a 200 kW chiller in an emergency, for planned maintenance or supplementary cooling, our expert team can help. We'll find the right chiller hire solution for your cooling requirements. Uses R407c refrigerant for reliability and optimum efficiency. 4 point ISO lift facilities and forklift pockets for optimum portability. Unit base and frame made from heavy-gauge steel. Full CE design compliance. 3 phase and earth electrical connections, no neutral cable required. Designed to plug and play with all Aggreko ancillaries including hoses, pumps, manifolds, heat exchangers, buffer tanks etc Environmentally friendly with zero ozone depletion factor. Low sound attenuation for sound-sensitive projects. Energy efficient compressor units ensure low running costs. Simple to read and adjust control panel. Condenser fan guards provide protection against accidental site damage. Ideal for use across a variety of installations, such as air conditioning and process cooling applications.

Bridge thermostats are suitable for controlling the temperature of any bath. External systems can also be controlled using rotational speed controlled pressure-suction pumps with VPC technology. Models with a larger heat output are suitable for larger bath volumes. The telescopic arm can be pulled out to a length of a maximum of 884 millimetres. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favourites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7“ touchscreen and comfortable menu navigation Overtemperature.

In small sewage treatment plants, investment costs play a decisive role. In stationary dewatering systems, for example, the construction of a new building can be significantly costly. You can avoid those costs with mobile container systems for sludge dewatering. Container-based solutions are a practical alternative to fixed dewatering installations.. A container is a true "plug and play" option – just connect it and start dewatering. ►Sludge dewatering in a one-man operation: comfort and personal safety, with control of the dewatering installation directly on-site. ►Year-round comfort: raised roof; insulated walls and roof, consistent use of stainless steel. ►Minimized maintenance effort: The roof can be opened by a single person using a manual hydraulic lifting system; the decanter can be opened with a crane built into the container. ►Optimized for operation in the smallest of spaces ►Easy transport with all current truck types