Plate heat exchanger - Import export

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.     Shape LU  This structural s

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat no costs involved Shape U    This structural shape is especially qualified for small plate heat exchangers. This structural shape is although qualified for plate heat exchangers which should streamed vertically.

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape L    This plate heat exc

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape K    An absolute classic

Plate heat exchanger

Plate heat exchangers are a part of the wort cooling in the beer production process. Made of stainless steel. The heat exchangers are vacuum-hard wired. They must be made of stainless steel plates and copper solder, which are looking at stainless steel.

Plate heat exchangers consist of a number of corrugated plates. The plate pack is mounted between a fixed and movable pressure plate, positioned by an upper and lower carrying bar, and compressed by several tightening bolts. The media involved in the heat exchange process are fed into the plate pack via connections on the fixed and movable pressure plates. The arrangement of the plates creates two separate channel systems, enabling the two media to flow past and between each other without physical contact, leaving the exchanger again via connections in the pressure plates. Plate with different patterns can be mixed in the heat exchanger in order to achieve optimum efficiency at a given pressure drop.

Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.

Working pressure up to 30bar Temperatur up to 195 °C Maximal 300 plates Various brackets Special versions on demand

Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich. UNEX brazed plate heat-exchangers are made of high quality, pressed stainless steel plates. These high-grade steel plates are hard-soldered by means of pure copper / lead flux using the vacuum method to produce a compact unit. Hard-soldered heat-exchangers are pressure vessels. In order to meet the safety regulations for pressure vessels, each heat-exchanger is submitted to a pressure and a leak test. All products are designed individually for the appropriate application and manufactured accordingly.

High performance plate type heat-exchangers consist of a number of formed, sealable heat-exchange plates according to the respective requirements. The alternating pressed plates and channel spacing cause highly turbulent flow behaviour, optimal self cleaning effect and highest possible heat transfer. Use of high-grade materials such as titanium, titanium palladium, highly alloyed steels and even a UniCarb carbon/graphite version help ensure UniGasket heat-exchangers are extremely economical compared to other heat-exchanger types. The plates are clamped to a rack between frame plate and pressure plate by means of clamping bolts.

Generate cold water / flake ice continuously Proven use Falling film chillers have been used in various industrial sectors for many years. Water runs over the heat exchanger plates from a trough arranged above the heat exchanger plates. This enables a continuous heat transfer between the water and the cooling medium. Outstanding advantages The arrangement of holes in the upper tub enables targeted water distribution on the heat exchanger plates. The construction using a perforated tub has the further advantage that no contamination occurs and the liquid to be cooled is evenly distributed. Made of stainless steel The trickle cooler is made entirely of stainless steel. You can choose between different materials (see data sheet). Low boiling delay Our trickle coolers are characterized by the fact that the boiling delay is low in flooded operation, whereby overheating can be selected in dry expansion operation.

We have all types of industrial heat exchangers, including: plate and frame shell and plate shell and tube fin/fan They’re refinery-grade, thoroughly cleaned, pressure tested and certified contaminant-free before each use. Capable of handling temperatures from -50ºC to +300ºC, they can also accept volatile gases and liquids, high pressures (up to 40 barg), hydrocarbons, sea water, effluent and brine. With a wide range of supporting ancillaries we can connect our heat exchanger units into any system design with minimum disruption. Heat exchanger hire with expert service support – every time Whether you’re facing emergency bottlenecks, turnarounds or seasonal cooling needs, our process engineers will work closely with you to find the best solution. They’ll visit your site, assess your needs, then design and size your project using their experience, simulation software and stream physical properties. We can also assess the performance of existing heat exchanger

The UniWeld combines the advantages of conventional shell and tube heat-exchangers with spiral and plate heat-exchangers due to its design and construction. This mixed construction is based on the design of the heat-transfer channels, which are on one side in the tube design and on the other side in a plate heat-exchanger. UniWeld Hybrid exchangers utilise in this way the advantage of tubular heat-exchangers (high temperature, pressure resistant and solid construction) and plate heat-exchangers (high heat transfer, minimal space and low logarithmic temperature difference) in a compact system. Other advantage compared with gasketed plate heat-exchangers is the safe splitting of the 2 media at pressures up to 80 bar and between -200°C and +900°C.

Polyester heaters also referred to as Polyester film heaters or Polyester foil heaters consist of an electrically conductive ink between two insulating respectively carrier layers of polyester. With a maximum size of 600 x 1000 mm, their average height is only 0.2 mm. As the picture examples show, practically any shape and type of cut-out is possible. Polyester foil heaters are resistant to permanent temperatures of up to 90°C (max. 100°C for short periods). It is generally not possible to predict which temperature a Polyester heating element will reach in the application, as there are extremely many influencing factors. These include not only the power, but also the mass and type of goods to be heated, the ambient temperature, air currents, the type of mounting and, of course, the control technology. Typical applications for Polyester heaters are e.g. cup warmers in coffee machines, mirror heaters, plate heat exchangers, flat applications with a target temperature below 90°C.

At Aldea, we're committed to environmental responsibility with R290 gas to reduce carbon emissions. Our Bigblue devices operate efficiently (-25°C to 43°C), ensuring high outlet water temperatures. Using superior inverter compressor technology, they cut electricity bills. Equipped with high-quality components, including advanced PCB cooling and state-of-the-art evaporators, they guarantee efficient heating, hot water, and cooling. Certified with WaterMark, our double-row plate heat exchangers meet top standards. Compatible with remote monitoring and control systems, our heat pumps offer easy management. With cloud technology, users can remotely access parameters, ideal for industrial facilities or hotels.

At Aldea, we're committed to environmental responsibility with R290 gas to reduce carbon emissions. Our Bigblue devices operate efficiently (-25°C to 43°C), ensuring high outlet water temperatures. Using superior inverter compressor technology, they cut electricity bills. Equipped with high-quality components, including advanced PCB cooling and state-of-the-art evaporators, they guarantee efficient heating, hot water, and cooling. Certified with WaterMark, our double-row plate heat exchangers meet top standards. Compatible with remote monitoring and control systems, our heat pumps offer easy management. With cloud technology, users can remotely access parameters, ideal for industrial facilities or hotels.

Our brazed plate heat exchangers offer customized solutions for a wide variety of applications. Thanks to the automated production and compact design of our brazed plate heat exchanger series, we can put together an individual heat exchanger for you within a very short time. The latest technology and decades of experience of successful applications guarantee highest quality, cost efficiency and reliability.

Our gasketed plate heat exchangers combine passion, scientific curiosity and technological expertise. The facts: High efficiency at low operating costs, versatile application possibilities with lower investment costs and maximum flexibility. Our efforts to continuously develop the gasketed plate heat exchanger-series further are aimed at meeting your thermodynamic and hydraulic performance needs and to ensure maximum economic efficiency. Our wide range of plate corrugations, connection sizes, materials, plate lengths and widths enable an ideal configuration according to your exact requirements. Additionally, our gasketed plate heat exchangers come with a maintenance-friendly assembly and sealing technology, ensuring low service and maintenance costs.

Our fully-welded plate heat exchangers make a convincing case due to their minimal size, outstanding thermal transfer coefficients and comparatively minimal investment costs. They are particularly robust and require only minimal cleaning and servicing. Their design advantages come into play especially in areas, in which, in addition to the output, load capacity is also a requirement.

CLEAN PROCESS WATER WITH GWK KU-PLANTS Water is one of the key elements in our daily life. It is a supplier of the most various requirements, also in the area of technical and mechanical production. Water is an excellent cooling medium. ku-plants from gwk utilise the cooling energy provided by water to carry away heat from production machines in the most troublefree and cost effective way possible. Removing side effects Fresh water from a well, from rivers and from other surface reservoirs is always saturated with oxygen and includes a large number of minerals and suspended particles which can block up the cooling channels in production units through corrosion or by producing deposits. ku-plants from gwk do not allow such problems to arise. A plate-type heat exchanger made of stainless steel separates the clean closed circuit that is used to cool the production from the natural fresh water circuit that is contaminated with all kinds of impurities.

DC inverter Heat Pump, with the advanced DC inverter and EVI technology, can save you 80% heating cost compare with the traditional heating device like gas/fuel boiler and electrical heater. It heats fast and works perfectly with the radiator and floor heater to provide you a comfortable living environment even in very cold winter. It is one of the best heating devices available today. Main Features 1) Twin rotary compressor with inverter control – DC inverter technology control the heat pump output according to the household's energy requirements. Low waste of the power! 2) Electronic Expansion Value allows the accurate refrigerant go through under different working conditions. 3) Intelligent controller and LCD displaying. 4) Safely operation with multi-protections. 5) Auto defrosting function. 6) Hydrophilic coating air exchanger and plate heat exchanger all available. OPTIONAL: R410a, R22, R407c refrigerant is available.

DC inverter Heat Pump, with the advanced DC inverter and EVI technology, can save you 80% heating cost compare with the traditional heating device like gas/fuel boiler and electrical heater. It heats fast and works perfectly with the radiator and floor heater to provide you a comfortable living environment even in very cold winter. It is one of the best heating devices available today. Main Features 1) Twin rotary compressor with inverter control – DC inverter technology control the heat pump output according to the household's energy requirements. Low waste of the power! 2) Electronic Expansion Value allows the accurate refrigerant go through under different working conditions. 3) Intelligent controller and LCD displaying. 4) Safely operation with multi-protections. 5) Auto defrosting function. 6) Hydrophilic coating air exchanger and plate heat exchanger all available. OPTIONAL: R410a, R22, R407c refrigerant is available.

Classical systems of the screw compressor have a regulated air cooling of the lubricating oil, which means that the excess heat is discharged into the ambient by the fan. In this way, the heat is completely lost. External heat recovery unit AirWatt is designed to efficiently exploit the waste heat, generated during compression of air in rotary screw compressors. Sometimes this represents more than 70% of the energy consumed by the rotary screw compressor for the operation. This heat can then be used to heat domestic water or for heating, at almost no additional costs. This does not only help save money but is also environmentally friendly. The unit has two separate piping systems with counterflow. Energy exchange from a compressor to sanitary water occurs in a plate heat exchanger, where compressor oil and sanitary water meets. The unit is controlled by a thermostatic valve, which prevents the compressor system from getting too cold and damaging the compressor.

ProArc Drill+ Gantry type auto drill machine is an automatic, efficient and high performance CNC drilling machine. Drilling width from 1,700mm~7,200mm Drilling length depends on request. It constituted by: 1. IPC based CNC controller 2. Servo Z-axis lifter 2. Servo drill spindle 3. Auto tool length detector

DESCRIPTION High stability on high capacity. Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018, FDA, HACCP, CE, UL SPECIFICATION HMI, SCADA System. Centrifugal pumps. CIP System. Apparent piping and extension system. ALFA LAVAL pasteurization gasketed plates. Diaphragm steam valves Copper plates heat exchanger. PT100 Sight glass. Our machine has been design to pasteurize Milk, Yogurt, Ayran and Juice. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from 10 kW to 40kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an open welded frame with standard profile, this condensing unit is also available in a double-deck construction for higher capacity. Assembled with shell and tube or plate heat exchanger, 1 to 4 scroll or reciprocating compressors and a liquid receiver as well as refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit.

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from10 kW to 40 kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an open welded frame with bent profile and powder coating, these condensing units carry a plate heat exchanger. Can be assembled with 1 to 4 reciprocating or scroll compressors with crankcase heater, a liquid receiver, refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit.

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from 10kW to 40kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an assembled frame with covers, this condensing unit can be designed in a variety of ways, depending on intended use. Collected with shell and tube or plate heat exchanger, 1 to 4 reciprocating or scroll compressors and a liquid receiver as well as refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit. An additional 50 mm rock wool insulation can be supplemented for a super silent unit operation.